HUFFORD A-12ストレッチ成型機

ID:370106
ブランド:HUFFORD
モデル:A-12
タイプ:ストレッチ成型機
売り主:販売者が誰であるかを見せて...
場所:Connecticut
アメリカ合衆国
価格:

スペック

Lower:10
トンネージ:59 T

L & F / Hufford A-12 – Long Arm version

Capacity 60 Ton
Jaw Axis Rotation + 180 degrees
Operating Pressure 2,000 PSI
Max. Tension Cylinder Pull 120,000 lbs.
Tension Cylinder Pull (Adjustable) 3 Tons to 60 Tons
Tension Cylinder Stroke 30”
Tension Cylinder Rotation + 25 degrees
Arm Swing (Each Arm) 10 degrees forward to 90 degrees back
Wrapping Speed Range (Adjustable) ½ degree/sec. to 3 degrees/sec.
Return Speed (Non Wrapping Mode) 5 degrees/sec.

Die Length At Full Tonnage and for 180 Degree Bend (longer dies can be used at lower tonnage):
Maximum 72 Inches
Minimum 20 Inches

Maximum Distance Between Jaws:

8” Jaws (not included) 338 Inches
Note: machine is currently equipped with sheet grippers approx. 18 inches wide

Machine Dimensions:
Width 389 Inches
Depth 252 Inches
Height 76 Inches
Die table from floor 43 ½ Inches
Centerline of Jaw to Top of Table 10 ½ Inches
Electrical Requirements 230 volts, 3 phase, 60 Hz
Hydraulic Reservoir Capacity 250 gallons
Weight 60,000 lbs.

詳細

Hufford A-12 hydraulic extrusion stretch forming press, 59 ton, long arm version, 6" diameter gripper heads

このモデルの詳細

の詳細について表示するには、 HUFFORD A-12レビュー、ブランド情報、写真、ビデオ、および多くを含むが、 ここをクリック