MAZAK SUPER QUADREX 250CNC旋盤

ID:378432
ブランド:MAZAK
モデル:SUPER QUADREX 250
タイプ:CNC旋盤
条件:中古品 - 良いです
年:2000
コントロール:CNC (Mazatrol PC-Fusion-CNC 640TE)
売り主:販売者が誰であるかを見せて...
場所:Kentucky
アメリカ合衆国
帰りの方針:現状のまま
在庫No.:XXG103114
価格:

スペック

Lower:48
チャック サイズ:254 mm
棒 能力:63.5 mm
#Axis:4
パワー:22.4 kW
最大回転数:4000 rpm
スイング:584.2 mm
加工長:609.6 mm
Upper:68
心押し台:Yes
ライブツーリング:No
サブスピンドル:No
大きさ:132.64" x 80.3" x 85.43"
重量:14,080
管理:CNC (Mazatrol PC-Fusion-CNC 640TE)

STANDARD SPECIFICATIONS:
Standard Chuck Diameter: 10"
Standard Bar Capacity: 2.5"
Maximum Swing: 23"
SPINDLE:
Spindle Nose: A2-6
Spindle Bore: 2.99"
Spindle Speed: 35~4,000 RPM
Number of Speed Ranges: 1
Spindle Horspower (Cont/30 Mins): 20/30HP (A.C.)
Spindle Torque: 258 ft-lbs
STANDARD TURRETS:
Type of Turret (Lower): Dodecogonal Drum/Hydraulic Non Lift
Type of Turret (Lower): Octogonal Drum/Servo Non Lift
Number of Tools (Upper/Lower): 12/8
Maximum Cutting Dia. (Upper/Lower Turret): 14"/10.39"
Maximum Cutting Length (24" Universal): 22.375"
Tool Sizes:
Turning & Facing: 1" x 1"
Boring Bar Shank Dia.: 1.5"
Upper Turret Index Time (sec): 0.25/1 pos 1.2/Full Turn
Lower Turret Index time (sec): 0.2/1 pos 0.6/Full Turn
Axis Travel:
X-Axis (Upper/Lower): 7.5"/5.875"
Z-Axis (24" Universal)(Upper/Lower): 25.5"/24.875"
Rapid Traverse Rate:
Upper Turret: (X & Z Axis) - 1181 IPM
Lower Turret: (X Axis) - 1181 IPM
Lower Turret: (Z Axis) - 787 IPM
Tailstock: (Universal Model)
Quill Taper: MT #4
Quill Diameter : 3.9"
Quill Stroke : 3.94"
Body Travel (24" Universal): 20.5"
Floor Space: (L X D) (24" Universal) 132.64" x 80.3"
Machine Height: 85.43"
Total Power Required (Machine only): 32.68 KVA
Note: Actual Machine Main Transformer
KVA Rating Will Be Greater
Machine Weight (24" Universal): 14,080 lbs.

詳細

STANDARD EQUIPMENT:
Mazatrol PC-Fusion-CNC 640TE control (10.4" Color LCD)
Includes: RS232C Interface, Background Tool Path Check, 8 Figure Program
Number, Floppy Disk Unit, PCMCIA Interface, IC Memory Card
Interface, EIA/ISO Input, Macro Programming with 600 variables, Polar Coordinate Interpretation, Selection of Workpiece Coordinate System and Direct Entry of Drawing Dimensions.
Automatic Tool Setting System (Tool Eye): (Tool set-up/Tool Wear
Compensation/Tool Breakage Detection)
Multi-tap Transformer which accommodates 190-500 Volts
Hydraulic Unit
Standard Worklight
Complete Coolant System 520W x 2
(Coolant Tank Capacity 63.4 gal)
Chip & Coolant Splash Guarding
(Full Coverage)
10" Hydraulic Thru‑Hole Chuck #B‑210A615 Cylinder S‑1875‑15Y with
One (1) Set of Soft Jaws
Front Door Interlock
Hydraulic Pressure Interlock
Programmable Tailstock with High Speed Live Center
Chip Conveyor Preparation

このモデルの詳細

の詳細について表示するには、 MAZAK SUPER QUADREX 250レビュー、ブランド情報、写真、ビデオ、および多くを含むが、 ここをクリック