FIMI CUT TO LENGTH LINE長さ切断ライン

ID:379330
ブランド:FIMI
モデル:CUT TO LENGTH LINE
タイプ:長さ切断ライン
条件:中古品 - 良いです
売り主:販売者が誰であるかを見せて...
場所:Nordrhein-Westfalen
ドイツ
帰りの方針:現状のまま
在庫No.:05.71-1
価格:

スペック

Lower:39
最大幅:2,080 mm
最大 厚さ (ゲージの):15 ga
Upper:59
ワークの最大厚さ(インチで):15 mm

Material Strip Steel, hot rolled
Band Width unedged min. 800 mm max. 2.080 mm
Band Thickness min. 3,00 mm
max. 15,0 mm (plus Tolerances in Accordance to
the Stahl-Eisen Material Specification 03061)
Trimming Width min. 700 mm, max. 2.000 mm
Tensile Strength min. 28 kg/mm²
max. 64 kg/mm² up to 12 mm Band Thickness
max. 45 kg/mm² up to 15 mm Band Thickness
Max. Edge Width 50 mm at 12 mm Band Thickness
90 mm at 6 mm Band Thickness
Coil Width for Storage on Coil Car min. 1.000 mm
Coil Weight max. 30,0 t
Coil Inside – Ø 508 - 850 mm
Coil Outside – Ø 800 – 2.000 mm
Strip Tension - Decoiler max. 3.000 kg
Sheet Length min. 1.000 mm, max. 17.000 mm
Stacking Weight max. 3.000 kg/m Length
Stacking Height max. 400 mm
Length Tolerances max. ± 0,5 mm up to 3.000 mm Sheet Length
± 0,1 mm for each additional Meter Length
Infeed Speed between the Machines 10 m/min.
Working Speed 0 – 22 m/min. (8 – 12 mm Thickness)
Depending of Configuration max. 23 – 24 m/min.
Number of Cuts max. 15 Cuts/min.
Working Direction left  right

The Line consists of:
Coil Car hydraulically
min. Coil Width for Storage on Ramp 1.000 mm
Double Head Decoiler with mechanical Brake System
Expanding hydraulically
Decoiler movable on Base Plate
Strip Back Tension max. 3.000 kg
Band Centering Control System
Manufacturer EMG
Portal with Processor Rolls, Support Roll and Press Roll
Processor Roll – Ø 180 mm
Back Up Roll – Ø 300 mm
Coil Opener hydraulically
Pre-Leveller
No. of Driving Rolls 2
Driving Roll – Ø 340 mm
No. of Levelling Rolls 5
Levelling Roll – Ø 160 mm
No. of Guide Rolls 1
Guide Roll – Ø 190 mm
Crop Shear hydraulically
Crop Length max. 500 mm
Edge Trimming Shear with Scrap Cutter
Blade – Ø new 520 mm
Blade – Ø grinded min. 480 mm
Blade Width 50 mm
Leveller
No. of Levelling Rolls 15
Levelling Roll – Ø 110 mm
Back Up Rolls each 5 Series above and below
Height Adjustment – upper Rolls motor-driven
Tilting Adjustment – upper Roller Set motor-driven
Support Adjustment – central – lower Back Up Roller Set motor-driven
Single Adjustment – lower Back Up Rolls hydraulically
Tastronic Shear Rotary Construction
Band Thickness 3 – 16 mm
Band Width 400 – 2.080 mm
Breaking Strength up to 650 N/mm² at 3 – 15 mm Band Thickness
up to 360 N/mm² at 15 – 16 mm Band Thickness
Line Speed
Material Thickness 3 – 8 mm up to 30 m/min.
Material Thickness 8,1 – 15 mm up to 22 m/min.
Sheet Length 800 – 17.000 mm
Band End Length 800 mm
Leveller
Manufacturer UNGERER
Band Thickness 1,4 – 5 mm
Band Width 2.000 mm
No. of Levelling Rolls 17
Levelling Roll – Ø 80 mm
Levelling Roll Length 2.200 mm
Back Up Rolls above and below each fivefold = 95 Pcs.
Working Speed app. 23 m/min. constant
Height Adjustment electrically
Tilting Adjustment electrically
Support Adjustment manually
Single Adjustment manually
Inspection Conveyor Table
Length 6.000 mm
Stacking Device with Infeed Driving Roll Unit
Length 12.000 mm
Extension Device
Length 12.000 mm
Stacking Weight 3.000 kg/m Length
Stacking Height max. 400 mm
Central Hydraulic Equipment
Complete Electrical Equipment incl. Electronic Control for the Tastronic Shear
Tastronic Shear 2009
Electric completely new in 2011
Hydraulic 2012