GANESH GMV2垂直ミルズ

ID:379475
ブランド:GANESH
モデル:GMV2
タイプ:垂直ミルズ
条件:新しい在庫がある
年:2017
売り主:販売者が誰であるかを見せて...
場所:California
アメリカ合衆国
価格:

スペック

Lower:49
表A-W:228.6 mm
表A-L:1,270 mm
トラベル-長さ方向:965.2 mm
トラベル-クロス:304.8 mm
Upper:69
パワー:2.2 kW
回転数:60 rpm
テーパー:R-8
重量:2800 lbs

TABLE –
Table Size: W x L 9” X 50” (230 X 1270mm)
T-slot Width / Quantity 5/8” / 3 on 2.5” centers
Table Load Capacity 400 pounds (200 kg)
Table Surface to Floor Dimension 32’ – 48” (820 -1226mm)
MACHINE TRAVELS & CAPACITY –
Table Travel – Longitudinal – X Axis 38” (966mm)
Table Travel with Power Feed 34.5”
Cross Travel – Y Axis 12” (305mm)
Vertical Knee Travel – Z Axis 16” (406mm)
Overarm (ram) Travel 12” (305mm)
Overarm Swivel 360°
Spindle Nose-to-Table Surface 0” – 18.5” (0 - 469mm)
Spindle Centerline to Column Face 6.75” – 18.75” (171 – 476mm)
Leadscrews with ground pitch surface (X & Y) 0. 200” per rev. (ballscrews optional)
Adjustable scale ring display resolution 0.001” (5mm)
Ways – X, Y, & Z Axes – Hard Chrome Plated Hardened & Ground Dovetail Ways
SPINDLE HEAD – Vari-Speed
Spindle Motor 3-HP, 3-Phase 208–240 vac
Spindle Taper (hardened & ground) R-8 (ISO NST 30-taper optional)
Spindle Runout 0.00008” maximum runout (0.002mm)
Spindle Bearings ABEC-7 matched set Class-7 bearings
Variable Speed Spindle 60 – 4,500 RPM
Head Tilt (Left-to-Right) 90° – 0 – 90°
Head Tilt (Front-to-Back / Up-Down) +45°– 0 – -38°
Head Swivel on Turret 360°
Quill –
Quill Diameter 3-3/8” (85.725mm)
Quill Travel – Manual & Power Feed 5” (127mm)
Quill feeds – With Trip Release - Inch 0.0015”, 0.003”, 0.006”
Quill feeds – With Trip Release - Metric 0.04mm, 0.08mm, 0.16mm
DIMENSIONS & WEIGHT –
Machine Weight 2,222 lbs. (1010 Kgs)
Electrical Requirements - 208 – 240 vac, 3-Ph., 60 Hz., 9.5-amps

詳細

Ganesh GMV-2F Precision Manual Knee Milling Machine 9"X50" Table 60 – 4500 RPM Spindle Speeds
Machine Features:
Multiple knee and table locks for superior rigidity
T-slots ground to 5/8” for an accurate reference edge - fits standard workholding T-nuts
One-Shot Metered Central Lubrication System for slideways and lead screws
Spring Loaded roller type way cover is included for added safety and protection of machine column
Built-in coolant pump
Chip-Tray is included
Water resistant halogen lamp is included
Cast-in leveling ledge for ease in leveling
Inspection Report on accuracy, Instruction Manual, Tools and Tool Box all included
Large compliment of parts and accessories in stock to ensure continued operation

このモデルの詳細

の詳細について表示するには、 GANESH GMV2レビュー、ブランド情報、写真、ビデオ、および多くを含むが、 ここをクリック