CINCINNATI GILBERT C SERIES水平テーブルタイプボーリングミルズ

ID:380890
ブランド:CINCINNATI GILBERT
モデル:C SERIES
タイプ:水平テーブルタイプボーリングミルズ
年:1967
売り主:販売者が誰であるかを見せて...
場所:Ohio
アメリカ合衆国
在庫No.:8280
価格:

スペック

Lower:80
スピンドル サイズ:101.6 mm
表のX HORIZ TVL:2,438 mm
ヘッドのYヴェールTVL:1,524 mm
パワー:11.2 kW
Upper:100
回転数:1715 rpm
表A-W:2,438 mm
表A-L:1,219 mm

ONE (1) USED
4" CINCINNATI GILBERT TABLE TYPE HORIZONTAL BORING MILL


NEW IN 1967
MODEL: SERIES C

Note: THIS MACHINE WAS COMPLETELY REMANUFACTURED BY CINCINNATI GILBERT in 1988

SPECIFICATIONS:

SPINDLE DIAMETER........................... 4"

CONTINIOUS FEED TO SPINDLE................. 30"

SPINDLE TAPER.............................. #50

VERTICAL TRAVEL............................ 60"

CROSS TRAVEL............................... 96"

SADDLE TRAVEL.............................. 28"

WORKING SURFACE OF TABLE............. 48" X 96"

LENGTH OF SADDLE.......................... 140"

SADDLE WIDTH............................... 40"

SADDLE TRAVEL ON BED - MAXIMUM............. 28"
- MINIMUM............. 1"

SPINDLE SPEEDS IN GEOMETRIC PROGRESSION..... 36

SPINDLE SPEED RANGE............... 8 - 1715 RPM

SPINDLE FEEDS............................... 16

SPINDLE FEED RANGE............ .0006 - .125 IPR

FEEDS............................ .020 - 40 IPM

RAPID TRVERSE RATE..................... 120 IPM

MAIN DRIVE MOTOR...................... 15 HP AC

ELECTRICS............................. 440/3/60

FEATURES & EQUIPMENT:

3-AXES READOUT

AUTOMATIC LUBRICATION OF ALL WAYS

HARDENED AND GROUND REPLACEABLE WAYS ON BOTH BED AND SADDLE

WAY COVERS FOR SADDLE WAYS ATTACHED TO TABLE

WAY COVERS FOR FRONT OF MACHINE BED COVERING CENTER GUIDE WAYS ON BED

FULL PENDANT CONTROL (HEIGHT OVER PENDANT BOOM 160", MAX. HEIGHT OVER COLUMN IF PENDANT LOWERED 141")

POWER DRAWBAR AND TOOL EJECTOR




3 TABLE T-SLOTS CROSS

6 TABLE T-SLOTS LONG

UPDATED FEATURES FROM RE-BUILD: 1988

NEW HYDRAULIC MAIN DRIVE CLUTCH AND BRAKE IN LIEU OF ELECTRIC CLUTCH AND BRAKE

HYDRAULIC ORBIT MOTOR SHIFTING FOR SPINDLE SPEEDS AND FEEDS

HARDENED ROLLED BALL SCREWS AND ANTI-BACKLASH NUTS FOR TABLE,

SADDLE, HEAD AND SPINDLE
NEW CARBURIZED AND GROUND SPINDLE AND SPINDLE BUSHINGS ANTI-FRICTION LINERS ON ALL MACHINE SLIDING SURFACES AND GIBS

"AS IS, WHERE IS" OHIO

詳細

4" CINCINNATI GILBERT TABLE TYPE HORIZONTAL BORING MILL THIS MACHINE WAS COMPLETELY REMANUFACTURED BY CINCINNATI GILBERT IN 1988

このモデルの詳細

の詳細について表示するには、 CINCINNATI GILBERT C Seriesレビュー、ブランド情報、写真、ビデオ、および多くを含むが、 ここをクリック