TRAUB TNC65 DGY5軸以上のCNC旋盤

ID:384578
ブランド:TRAUB
モデル:TNC65 DGY
タイプ:5軸以上のCNC旋盤
条件:中古品 - 良いです
コントロール:CNC (Traub TX-8F10 Meldas)
売り主:販売者が誰であるかを見せて...
場所:アメリカ合衆国
在庫No.:cnctrx
価格:

スペック

Lower:54
#Axis:7
パワー:18.6 kW
最大回転数:5000 rpm
Upper:74
加工長:449.6 mm
重量:13,500 lbs
管理:CNC (Traub TX-8F10 Meldas)

S/N: 455 New: 1996

EQUIPPED WITH:
Traub/Mitsubishi TX-8F10 Meldas CNC Control. Sub Spindle. High Pressure Thru Tool Coolant To Both Spindles. Full "C" Axis For Both The Main And Sub Spindles. Collect Chucks On Both Spindles with 2-9/16" Thru Hole Actuators. . 10-Position Upper And Lower Turrets. Drives For Up To 10- Rotary Turret Tools In Turrets 1 And Turret 2. Y-Axis To The Upper Turret. LNS Quick Load Bar Feeder. Parts Catcher. Large Quantity Of Tool Holders Including (10) Live Toolholders. Chip Conveyor. Transformer. Manuals And Drawings.

SPECIFICATIONS:
WORKING CAPACITY (MAIN SPINDLE)
Spindle Capacity (Maximum Bar Diameter) 2-9/16"
Spindle Nose A2-6
Maximum Turning Length 17.7"
Spindle Speed Range 50-5000 RPM
Spindle Drive 25 HP
WORKING CAPACITY (SUB SPINDLE)
Spindle Capacity (Maximum Bar Capacity) 2-9/16"
Spindle Nose A2-6
Spindle Speed Range 50-5000 RPM
Spindle Drive 10 HP
Rapid Traverse & Contouring Rate 590 IPM
Maximum Travel 20.47"
C-AXIS FOR THE MAIN AND OPPOSED SPINDLES
Speed Range 0.01-80 RPM
Full C-Axis Capability .001° increments
TOOL TURRET #1/SLIDE #1 (ABOVE SPINDLE CENTERLINE)
Tool Positions 10
For Quick Change VDI Block Tooling VDI 30 DIN 69880
Driven Tools 10
TOOL TURRET #2/SLIDE #2 (BELOW SPINDLE CENTERLINE)
Tool Positions 10
For Quick Change VDI Block Tooling VDI 30 DIN 69880
Driven Tools 10
DRIVE FOR ROTATING TOOLS (BOTH TURRETS)
Drive 5.4 HP
Speed Range 200-4000 RPM
Maximum Stroke for Cross Drilling 2.360"
COMPOUND SLIDES WITH TURRETS - BOTH TURRETS
Slide Traverse (X-Axis)/Longitudinal (Z-Axis) for Slides 1&2 5.5" / 17.7"
Slide Traverse (Y-Axis) (Slide #1/Upper Turret Only) ±1.387"
Rapid Traverse and Contouring Rates (X/Y/Z Axes) 590/236/590 IPM
Approximate Weight 13,500 lbs

詳細

Traub TNC65 DGY Opposed Spindle 7-Axis CNC Turning and Milling Center, LNS Quick Load bar Feeder, Well Tooled, 1996

このモデルの詳細

の詳細について表示するには、 TRAUB TNC65 DGYレビュー、ブランド情報、写真、ビデオ、および多くを含むが、 ここをクリック