FASTI 225-32-6ホールデイング 機械

タイプ:ホールデイング 機械
条件:使用 - 優れました


最大 厚さ:0.25 "
OA 長さ:10.63 '
OA 長さ:127.5 "
大きさ:210" x 115" f-b x 88" tall
重量:approx 17,000 lbs
管理:CNC (CFP 120)

Maximum Capacity, Full Length Mild Steel .25”
Bending Length 127.5”
Smallest Inner Bend Radius (per DIN 6935 specification) 1.25 x Gauge
Minimum Flange Height (per DIN 6935 specification) 6 x Gauge
Clamping Beam Profile 45˚
Clamping Beam Stroke 13.78”
Clamping Beam Speed, Up 3.27”/sec
Clamping Beam Speed, Down 1.97”/sec
Clamping Beam Positioning Accuracy +/-.0004”
Folding Beam Adjustment 3.15”
Folding Beam Speed, Up 60˚/sec
Folding Beam Speed, Down 113˚/sec
Folding Beam Speed, Maximum 86.5˚/sec
Folding Beam Accuracy +/-1/2˚
Folding Angle Range 0 - 180˚
Bottom Beam Adjustment 3.15”
MAH25R Backgauge Range .394” – 63”
Backgauge Accuracy +/-.002”
Maximum Gauging Speed 13”/sec
Quantity of Gauge Fingers 10
Working Height 35.43”
Machine Height 88”
Machine Width 210”
Machine Depth with MAH25R 71”
Weight, approximate 17,000 lb.
Hydraulic Oil 37 gal.
Air Pressure 5 bar
Motor Drive Power 11.5 HP
Electrical, 3 phase 60 Hz 220/440
Clamping Force 44 tons
Rolling Footswitch

Safety Limit Switch in foot pedal for automatic upstroke of Clamping Beam

Light Beam in side frames for stopping folding beam when engaged

2 Emergency stops mounted on magnets with long cable to place anywhere

Automatic Hydraulic Tool Clamping

CNC Motorized Adjustment of Lower Beam for rapid changes in material thickness. Also allows the use of special radius tools.
CNC Motorized Crowning Adjustment for rapid changes in material thickness. Also allows the use of special radius tools.

CFP 120 control
• Calculation of material cutting length (out folded)
• Technology table for materials
• 12“ color-LCD-Touch-Screen-Display
• RAM 64 MB (for approx. 14,000 programs)
• 99 cycle repetitions
• Graphic tool memory for 10 tools
• Error detection
• Language: D/GB/F/NL/DK/FI
• Inch / mm programming
• Control on swivel arm

Backgauge system MAH25R:
• .394” – 63” range, with 2 rows of pop-up gauge fingers
• Driven by 1.5” diameter ball screw with dual precision linear guides
• Rollers in sheet supports to move material with minimum friction
• 10.5”/sec at +/-.002” positioning accuracy

Tooling (All full sets for 127.5” bending)
Clamping Beam:
• Sharp Nose Blade: SA-45˚, segmented, full 1/4” x 10’ capacity
• Tall 180mm/7.08 “C” Style Goats Foot tooling, segmented
Folding Beam:
• 42mm/1.65” segmented
Lower Beam:
• Tool machined with finger grooves to allow part gauging down to .393”


Under power and available for demo in Kansas.


の詳細について表示するには、 FASTI 225-32-6レビュー、ブランド情報、写真、ビデオ、および多くを含むが、 ここをクリック