FANUC ROBODRILL ALPHA T21IFボール盤、タッピング センター

ID:393362
ブランド:FANUC
モデル:ROBODRILL ALPHA T21IF
タイプ:ボール盤、タッピング センター
コントロール:CNC (Fanuc 31i-A5 5-Axis CNC Control)
売り主:販売者が誰であるかを見せて...
場所:アメリカ合衆国
在庫No.:27043
価格:

スペック

Lower:33
X:499.9 mm
Y:399.8 mm
Z:327.7 mm
パワー:5.6 kW
Upper:53
回転数:10000 rpm
#ATC:21
テーパー:BT-30
管理:CNC (Fanuc 31i-A5 5-Axis CNC Control)

Reference #27043

FANUC Robodrill Alpha T21iF CNC Drilling and Tapping Center
Serial No.: P085WG765
Age 2008
Model: Alpha T21iF

FEATURES:
Fanuc 31i-A5 5-Axis CNC Control
Tsudakoma TN-131 Tilting and Rotating CNC Rotary Table (4th/5th Axis)
21-Station Automatic Toolchanger

CAPACITY:
X-Axis Travel ......................... 19.68"
Y-Axis Travel ......................... 15.74"
Z-Axis Travel ......................... 12.9"
Table Working Surface ................. 15.74" x 25.6"
Max Table Load ........................ 660 Lbs.
Distance from Floor to Table .......... 30.9"
Max Distance Spindle to Table Top ..... 23.2"
Min Distance Spindle to Table Top ..... 10.2"
Spindle Speeds, Inf. Variable ......... 10 to 10,000 RPM
Max Spindle Speed for Tapping ......... 5,000 RPM
Spindle Taper ......................... BT-30
Rapid Traverse (X,Y,Z-Axes) ........... 2125 IPM
Feed Rate (X,Y,Z-Axes) ................ 1181 IPM
Tool Changer .......................... 21 ATC
Maximum Tool Diameter ................. 3.14"
Maximum Tool Length ................... 9.8"
Maximum Tool Weight ................... 33 Lbs.
Torque, Up To ......................... 52 Ft. Lbs
Rigid Tapping Speed ................... Up To 8000 RPM
Tool Change Time ...................... 0.9 Sec Tool-To-Tool

2-AXIS TSUDAKOMA CNC ROTARY TABLE:
Model ................................. TN-131
Table Diameter ........................ 5.31"
Spindle Size .......................... 3.54"
Spindle Height ........................ 8.26"
Center Height ......................... 5.90"
Min/Max Tilt Angle w/o load ........... -17 Degrees to 107 Degrees
Load Capacity (Horizontal) ............ 77 Lbs.
Load Capacity (0 to 90 Degree Tilt) ... 44 Lbs.
Rotation/Tilt Speed ................... 41.6 RPM/16.6 RPM

EQUIPPED WITH:
Fanuc 31i-A5 5-Axis CNC Control
AI Contour Control II (Hi Speed/Hi Precision 5-Axis Package)
""Big Plus" Dual Contact Spindle (Four Bearing Design) - High Torque
4.33" Factory Extended Column Riser for Additional Z-Axis Height
Tsudakoma TN-131 2-Axis CNC Rotary Table
Northfield 3-Jaw Chuck with Pneumatic Clamping
(2) Valve Pneumatic Package
High Pressure Through Spindle Coolant
Large Capacity Coolant Tank (200 Liter)
Automatic Lubrication
5/7.5/16.5 HP (Continous Duty/10 Min./1 Min.) AC Spindle Drive Motor

詳細

Fanuc Robodrill Alpha T21iF, X-19.68", Y-15.74", Extended Z, 10,000 RPM, Fanuc 31i-A5, Tsudakoma CNC 4th/5th Axis, 2008, #27043

このモデルの詳細

の詳細について表示するには、 FANUC ROBODRILL ALPHA T21IFレビュー、ブランド情報、写真、ビデオ、および多くを含むが、 ここをクリック