TRUMPF TRULASER TUBE 7000,OPTIONAL 30' RAW PIECE LENGTH, MFG:2011 Our stock number: 11278 TruLaser Tube 7000 Specifications Z-axis: 8 in. (200 mm) Y-axis: 8 in. (200 mm) Optional 10 in (254 mm) X-axis: 252 in. (6500 mm) Optional 360 in. (9200 mm) Rotation axis A1-(Rotating Chuck and Feed Unit): 360 Rotation axis A2-(Tube Feed Guide Unit): 360 Capacitive height regulation range: + 0.79 in. (20 mm) Positioning speeds, maximum: X: 3,937 in./min. (100 m/min) Y: 2,362 in./min. (60 m/min) Z: 2,362 in./min (60 m./min.) A: 900/sec Max. length of raw tube for automated production: 252 in (Optional 360 in.) Max. wall thickness: 0.3 in. (8 mm) Max. tube weight 8 in: 17 lbs / linear ft Optional max tube weight 10 in: 25 lbs / linear ft Length of finished part: 120 in - Standard machine unload 251 in. - PRS 6001 Tube waste length: Round/Rect./Square tubes: 4.7 in. (120 mm) Min. Largest tube cross-sections that can be worked: 8 in. (203.2 mm) diameter envelope 10 in (254.0 mm) as option Smallest tube cross-sections that can be worked: Round tubes: O 0.6 in. (15 mm) Minimum edge length on square and rectangular tubes: 0.6 in. (15 mm) Other types of profiles and sections (other than round, square and rectangular) must be examined separately with respect to machining, feed, separation and clamping possibilities; Laser units: (in Watts) TruFlow 3600 System power consumption: See installation conditions Control system: Siemens 840D Max. working pressure: 290 psi. (20 bar) Working height: 44.3 in. (1,125 mm) Space requirements (standard version): See layout Total weight: Varies with the configuration *Accuracy (X, Y, Z, A axes): Smallest programmable increment: 0.0004" (0.01 mm) / 0.001 Positioning accuracy (Pa) + 0.008" (+ 0.2 mm) / 0.015 Repeatability (Ps) + 0.002" (+ 0.06 mm) / 0.005 Options Description SeamLine (weld-seam detector system) A light contrast-measuring device able to find most weld seams. Samples of your tube should be evaluated before this device is ordered. Increased tube diameter Possibility to handle and process tubes with a maximum outer circle diameter of 10 in Material Handling Options: Loading LoadMaster Tube 30 ft with auto tube loader Automatic tube feed for round, square and rectangular tubes with the help of a bundle magazine. Can be used for tube lengths of 10 ft up to 30 ft. Integrated length measurement and zero point positioning of raw material in the transfer unit. The maximum bundle weight is 8.800 lbs. The tubes are transported onto a buffer tack from the bundle magazine. As an alternative, tubes can be loaded on the buffer track manually. A gripper system picks the tubes up from the buffer track and transfers them to the feed and rotary station. Slewable conveyor path for LoadMaster Tube For manually loading of small lot sizes and the processing of special profiles. Unloading Part removal station 21-ft with brush conveyor Larger form of the standard unload, allowing automated finished part unload of parts up to 21 feet in length. Incorporates tube supports unloading to an incline, then to a brush table conveyor. Additional part removing rear for part removal station Parts can be unloaded on the brushtable to the front or into a box to the rear.