• DSPTT-40
見る

5軸以上のCNC旋盤CNC NEW, INC. DSPTT-40

California, アメリカ合衆国

概要

ブランド
モデル
ID
445463
条件
新しい在庫がある
2019
場所
California
アメリカ合衆国
詳細
We are delighted to present the DSTT-40 Mill-Turn dual spindle turning center. The DSTT-40 turning centers combine dual-spindle turning the with C-Axis and a power tool driven turret to create a powerful "done in one" machining solution. Off center milling, drilling and tapping operations are possible for increased machining capabilities. The opposed spindles support fully synchronized turning, and allow on-the-fly part pass-off to reduce cycle times. These machines offers the widest selection of options at the very best value in it’s class. This dual spindle model has an A2-6 main spindle and counter spindle nose. The DSPTT-40 Mill-Turn Dual Spindle Twin turret tuning centers have a LS-200DTR 12-Station Servo Turret manufactured by Lio Shing one of the largest manufactures of turrets in Taiwan with a gear ratio of 1-1, Hydraulic power source: P=40 kg/CM2, and clamping force of 4,240. Design includes three-piece type curvic clutch ensures high precision accuracy. Tool holders are driven by a servomotor that features high torque output and with low noise. Repeatability accuracy reaches 0.003 mm. 4,000 maximum high speed. Inside mechanism employs parallel cam, featuring high indexing accuracy and fast tool change. Turret clamping/ unclamping is operated through hydraulic power, assuring smooth motion and permitting for heavy duty machining. The turret can be mounted at right or left side with random tool selection function. Tool Shank Specifications: VDI40, DIN5480 W20 X 0.8/, BMT65-ER32 Other turret options available on request. We have the most affordable magazine bar feeds in the industry and the same for robotic arm loaders. The DSPTT-40 uses the NEW 988TD CNC control is a dual-channel turning center CNC control developed by GSK Equipment Co., LTD. And is based on ARM+DSP dual core hardware architecture by connecting with the industrial Ethernet bus with the (GSK-Link), the servo drives and a remote I/O unit. The 988TD can control up o 10 axis and 4 spindles, each path includes 6 feed axis (including C Axis) in each path, 3-axis link and 3 spindles to realize the turning with compound milling operations. The servos motors use high-resolution absolute encoders that provide 0.1 m position precision, and 1ms interpolation period to perform a turning-milling compound machining and can provide the control performance for multi-axis turning and machining centers.
スペック
メトリックに仕様を変換します
#Axis10
チャック サイズ2"
棒 能力2"
パワー10 hp
最大回転数4,500 RPM
ターニング 径2"
スイング22.8"
加工長18.8"
心押し台Yes
大きさ70 x 120 in
重量9920
管理CNC (GSK 988 TDi)

スペックシート

Capacities: SAE METRIC Max Swing Over Bed: 22.8 in 580 mm Max Swing Over Carriage: 13.7 in 350 mm Max Turning Diameter: 9.8 in 250 mm (with specific turret) Max Between Chucks: 18.8 in 480 mm Max Turning Length: Turret 13.7 in 350 mm Main & Counter Spindles: SAE METRIC Spindle Nose: A2-6 Spindle Chuck: 8 in 203 mm Spindle Bore: 2.4 in 61 mm Bar Capacity: 2 in 52 mm Max Spindle Speed: 4,500 rpm Collet Actuator: Hydraulic Cylinder Motor Power SAE METRIC Main Spindle Motor: 10 hp 7.5 kW Counter Spindle Motor: 7.5 hp 5.5 kW X/Y Axis Motors: 2.2/3.1 hp 1.5/2.3 kW Hydraulic Station Motor: 1.5 hp 1 kW Travels & Feedrate: SAE METRIC X1, X2-Axis Travel: 9 in 230 mm Z1-Axis Travel: 15.7 in 400 mm Z2-Axis Travel: 20.8 in 530 mm Z3 (Sub Spindle) Travel: 20.8 in 530 mm Rapid on X-Axis: 945 in/min 24 m/min Rapid on Z-Axis: 945 in/min 24 m/min Axis Max Feed Rate: 400 in/min 10.15 m/min Base SAE METRIC Integral Casting: One Piece Construction, Slant Angle 45 degree Rail Span: 15.7 in 400 mm X1, X2 Axis Ball Screw Spec.: 3208-C3 Z1, Z2 Axis Ball Screw Spec.: 3208-C3 Z3 Axes Ball Screw Spec.: 3208-C3 Timed Auto Lubrication: Bearing Packs & Ball Screw Nuts Head Stock: Cast Iron Precision: SAE METRIC Positional Repeatability: +/- 0.0001 (one tenth) / +/- 0.00254 mm Positional Resolution: +/- 0.00005 (50 millionths) / +/- 0.00127 mm Positional Accuracy: +/- 0.0001 (one tenth) / +/- 0.00254 mm Spindle Runout: +/- 0.00005(50millionths) / +/- 0.00127 mm C-Axis Indexing: Increment 0.001 deg. 360K Rad.Pos. Requirements: SAE METRIC Coolant Capacity: 22.5 gal 70 lit Coolant Pump: 3/4 hp 0.5 kw Compressed Air: 5 SCFM(Clean,Dry Air) Live tools Power Required: 30 KVA Voltage: 208-240 VAC 3 phase Machine Dimensions: SAE METRIC Machine Height: 72 in (6-Feet) 1828 mm Sheet Metal Length: 120 in (-Feet) 3048 mm Sheet Metal Width: 70 in (5-Feet) 1778 mm Machine Weight: 9920 lbs 4500 kg
売り手について
価格
$126,595.00 USD

$126,595.00 USD

このモデルの詳細

詳細情報を表示するにはCNC NEW, INC. DSPTT-40ブランド情報、写真、ビデオ、および多くを含むが、 ここをクリック

このタイプのリストを参照してください

thumb

STAR SB-16R/20R TYPE G

5軸以上のCNC旋盤

新しい在庫がある | New York, アメリカ合衆国
thumb

OKUMA MACTURN 250W

5軸以上のCNC旋盤

使用 - 優れました | 2004 | Michigan, アメリカ合衆国
thumb

NAKAMURA-TOME SUPER NTMX

5軸以上のCNC旋盤

2011 | Illinois, アメリカ合衆国
thumb

GEMINI GT5-42M

5軸以上のCNC旋盤

新しい在庫がある | 2009 | Michigan, アメリカ合衆国
すべてを表示

このブランドのためのより多くのリストを参照してください

thumb

CNC NEW, INC. GT-15

5軸以上のCNC旋盤

新しい在庫がある | 2019 | California, アメリカ合衆国
$54,995.00 USD
thumb

CNC NEW, INC. GT-DS2X

5軸以上のCNC旋盤

新しい在庫がある | 2019 | California, アメリカ合衆国
$92,995.00 USD