SOUTHWESTERN INDUSTRIES TRAK TRL 1630SXCNC旋盤

写真( 3 )

このモデルの詳細

詳細情報を表示するにはSOUTHWESTERN INDUSTRIES TRAK TRL 1630SXブランド情報、写真、ビデオ、および多くを含むが、 ここをクリック

詳細

For Sale Southwestern Industries Proto Trak 1630SX Lathe with Programmable Tool Changer

スペック

メトリックに仕様を変換します
#Axis
2
パワー
7.5 hp
最大回転数
2500 rpm
スイング
16 "
加工長
30 "

Southwestern Industries Proto Trak TRL 1630 SX with SLX Controll

Machine has just been serviced including Headstock oil has been drained , flushed and filled with New Oil

Saddle and Cross Slide have been disassembled , cleaned , flushed and verified all oil gallies are oiling correctly.

X Axis has been Rebuilt Including Ground Crossslide , New Rulon (Turcite) , New Ball Screw and Hand Scraped to Fit

Coolant tank has been drained and cleaned

Lathe has been Calibrated using Fixture from Southwestern Industries

Comes with8" 3 Jaw Chuck with Adjustable Scroll ( Tru Adjust)

4 Star 4 position Programmable Tool Changer that has been Disassembled ,Cleaned , Inspected and Greased
Lathe is powered and can be Tested

Balance on pickup.Shipping can be arranged at buyers cost.

Please call first to arrange shipping before purchase
Can load on truck or trailer at NO Charge

Machine Specifications
· Height of Centers-8”

· Distance between centers-30”

· Swing over bed -16”

· Swing over saddle wings-16”

· Swing over cross slide-8.6”

· Cross slide travel-9.6”

· Tool section max-3 /4”

· Coolant tank capacity-11 gal.

· Width of Bed-12.6”

· Height of Bed-12.6”

· Spindle Nose (Camlock)-D1-6

· Spindle through hole-2.12”

· Spindle taper-MT#6

· Taper in reduction sleeve -N/A

· Spindle dia at front bearing-3.15”

· Number of bearings-2

· Bearing class (radial round)-P5

· Spindle speed range (RPM)-150-2500

· Optional Tailstock Quill travel-5”

- Quill diameter-2.36”

- Quill taper hole-MT#4

· Spindle Motor HP -7.5

· Power requirements, control-110V; 1P; 8 A

· Power requirements, machine-220V;3P;60Hz

· Amps full load current-25

· Dimensions net - 79 x 38 x 54”

· Dimensions shipping - 87 x 45 x 67”

· Weight net - 3,200 lbs.

· Maximum rapid feed X - 100

· Maximum rapid feed Z - 150

· Spindle motor brake - Dynamic braking

· Way surface hardness - 400 – 450 HB

· Head stock lubrication - Oil bath

· Sliding door for easy set-ups

· Bedways hardened and ground

· Sliding surfaces Turcite coated

· Dovetails on cross slide, V-ways on saddle

· Adjustable saddle gibs


Machine has just been serviced includingHeadstock oil has been drained , flushed and filled with New Oil

Saddle and Cross Slide have been disassembled , cleaned , flushed and verified all oil gallies are oiling correctly.

X Axis has been Rebuilt Including Ground Crossslide , New Rulon (Turcite) , New Ball Screw and Hand Scraped to Fit

Coolant tank has been drained and cleaned

Lathe has been Calibrated using Fixture from Southwestern Industries

Comes with8" 3 Jaw Chuck with Adjustable Scroll ( Tru Adjust)

4 Star 4 position Programmable Tool Changer that has been Disassembled ,Cleaned , Inspected and Greased
Lathe is powered and can be Tested

売り手について

閲覧当社の情報

このモデルの詳細

詳細情報を表示するにはSOUTHWESTERN INDUSTRIES TRAK TRL 1630SXブランド情報、写真、ビデオ、および多くを含むが、 ここをクリック