歯車形削り盤LORENZ LS-180 4-AXIS RETROFIT

アメリカ合衆国

概要

ブランド
モデル
LS-180 4-AXIS RETROFIT
ID
473633
条件
使用 - 優れました
2003
場所
アメリカ合衆国
在庫No.
4162
詳細
Lorenz Model LS-180 CNC Gear shaper, 7" max diameter, 2" stroke, 6" cutter slide positioning, Fanuc 18MI controls motors and drives. Retrofit in 2003, Machine was gone through and and upfit . very nice condition. Service installation and training available Inquire!!
スペック

スペックシート

Lorenz CNC 4-Axis Gear Shaper Model LS-180  s/n 31-14032 Retrofitted & Rebuilt 2003 This lorenz CNC gear shaping machine is very universal. The 4 Axis CNC Fanuc control allows you many software options. The Z-axis slide of 6" of the cutter head slide positioning allows you to easily get in and out of tight internal gears. It allows you to also get down into parts where most machines are unable to without adaptors or special extensions and fixturing. SPECIFICATIONS: Max. Pitch Circle Diam., External Gear: 7" Max. Workpiece Diam., Internal Gear: 11" Max. Tooth Width: 2." Max. Module: 5 DP   Max. Travel:   X + Direction: 6.89"   X - Direction: 1.18"   Z - Direction: 5.9" Programmable Number of Teeth: 5-200 Connected Load: 44 kVA Speed Range, Main Motor: 650-3250/min Stroke Rate Range: 250-1250/min Output Main Motor: 6 kW@1000/min Max. Motor RPM:   Cutter, C Axis: 2000/min.   Workpiece, D Axis: 2000/min.   Radial, X Axis: 3000/min.   Axial, Z Axis: 3000/min.   Rotary Motion:   Cutter at diam.100, C Axis: 9.5"-190"/min   Workpiece at diam. 100, D Axis: .189"-380"/mn   Radial Motion, X Axis: .03-70.87"/mn   Axial Motion, Z Axis: .03-70.87"/mn MACHINE WEIGHT: 15,000 LBS   MACHINE IS EQUIPPED WITH THE FOLLOWING: * Spindle Column Positioning (6" of Stroking Column Adjustment) * 4" Additional Riser Assembly * Hydraulic Clamping * Magnetic Chip Conveyor * Complete Hydraulic and Coolant Systems * Full Manuals and Documentation * Miscellaneous Tooling and Equipment Note: The machine was completely remanufactured and re-controlled by RP Machine Enterprises in 2003. The machine was purchased then by a customer in Michigan and is now available for immediate sale. Contact us today for an under power inspection. Installation, training and service is available from Piselli Enterprises in USA & Canada !!! Visit WWW.PiselliEnt.com to view our extensive Gear machine inventory. If you don't see what you need send us a request to Rich@piselliEnt.com
売り手について

このタイプのリストを参照してください

FELLOWS FS-180

歯車形削り盤

中古品 - 良いです | 1993 | アメリカ合衆国
thumb

STANKO 5M150 NC

歯車形削り盤

大韓民国
thumb

STANKO IS - S 1000

歯車形削り盤

大韓民国
thumb

TOKYO KIKAI TF-64

歯車形削り盤

台湾
すべてを表示

このブランドのためのより多くのリストを参照してください

thumb

LORENZ SJ2

歯車形削り盤

大韓民国
thumb

LORENZ LS 82

歯車形削り盤

使用 - 優れました | 1999 | Bayern, ドイツ
thumb

LORENZ LS1000

歯車形削り盤

大韓民国
thumb

LORENZ LS-156

歯車形削り盤

使用 - 優れました | 1997 | インド
すべてを表示