GLEASON 512 HYPOID TESTER 歯車試験機

リスト情報

ID
473672
在庫No.
4145
ブランド
GLEASON
モデル
512 HYPOID TESTER
タイプ
歯車試験機
条件
指定されていない
場所
North Carolina
アメリカ合衆国
詳細
Gleason Model 512 hypoid gear tester. 20" max Gear Diam 10" max Pinion Diam. 39 degree taper, hydraulic clamping, automatic cycles, many features. Inspect in NC under power.

仕様

Gleason Hypoid Bevel Gear Tester
Model# 512 Automatic tester
S/N 702808

 Machine was purchased from an Off-Highway customer whom had shut down their
 plant. Machine is in very good running condition and can be inspected under
 power in our shop.

 GLEASON 512
 MACHINE SPECIFICATIONS
 CAPACITY
 Gear outside diameter (maximum).......................................508mm
 Pinion outside diameter (maximum).....................................254mm
 Offset of pinion spindle L or R of gear spindle center (max)........101.6mm

 PINION SPINDLE
 Diameter of taper hole at large end.................................3-29/32"
 Taper per foot........................................................39/64"
 Depth of taper............................................................3"
 Diameter of hole at small end.........................................3.740"
 Depth of hole at small end from face of spindle........................15.5"

 GEAR SPINDLE                                          Standard    Large Bore
 Diameter of taper hole at large end....................2-19/64".....3-29/32"
 Taper per foot.............................................1/2".......39/64"      
 Depth of taper...............................................3"...........3"
 Depth of hole at small end...............................2.168".......3.740"
 Depth of hole at small end from face of spindle..............8"...........7”

Machine Is Equipped with the following 
 Safety Guarding when operating
 control pendant
 hydraulic clamping
 forward and reverse cycles
 hydraulic unit
 Electrical panel attached with operator pendant control

 This machine can be inspected under power with proper notice
 please contact us today to see this machine and other gear machines in our
 NC facility.