GasherギアカッターGOULD & EBERHARDT 96-G REMAN

アメリカ合衆国

概要

ブランド
モデル
96-G REMAN
ID
473675
2019
場所
アメリカ合衆国
在庫No.
4142
詳細
Gould & Eberhardt Model 96-G Gear Gasher, 100" Max, 18" Min, Diam, 40" axial travel, can be equipped with either 1 DP external or 1.5 DP Internal Gashing head, Remanufactured/recontolled 2021 Excellent!! NOTE: Machine has been remanufactured mechanically and would need new electrical panel and New 3 axis CNC controller motors & Drives installed per customers request!
スペック

スペックシート

GOULD & EBERHARDT CNC Gear Gashing Machine Model 96-G  completely remanufactured and retrofit 2021 This G&E Gear Gashing machine was completely Remanufactured to cut both External and Internal diameter Gears and Splines. This machine was completely remanufactured professionally through our extensive remanufacturing process. The machine was also manufactured with new slide machined and fit to utilize and run the NEW G&E Designed Gashing heads.  All of our newly designed heads will fit on this remanufactured machine. See details below!! Note: The machine has been Re-manufactured with all new Ballscrews, hardened and ground ways, new hydraulics and brakes for the table along with new head slide, perfectly fit to receive New heads and control of your choice. Machine Capacities: For G&E Model 96-G (3-Axis) CNC SPUR Gear Gasher Max Gear Diameter Ext................................100" Min Gear Diameter Ext................................18" Max Face width Ext...................................55" Max Internal Gear Diameter...........................100" Min Internal Gear Diameter...........................32" Max Pitch Ext........................................1 DP Max Pitch Int........................................1.5 DP Machine Specifications and dimensions: Diameter of work Table 80" Bore Diameter in Work Table 23" Maximum load on Table 80,000 lbs Table worm Gear Diameter 76" Number of Teeth inf variable Power requirements 480V 3 Phase, 60Hz Pneumatic requirements 80 CFM at 90 PSI G&E Gasher with Standard Equipment: New Fanuc  or Siemens controller with motors and drives & gashing Software Oil Recirculation w/ filtration Oil Chilling System Split 2-Piece table/ Stanchion Design Single Stanchion machine assembly Control Features * C-Axis  (Work Table Rotation) * X-Axis  (Radial Infeed) * Z-Axis  (axial Feed) * Fanuc Spindle motor for Cutter Rotation Programs Feature: - Custom Macro Screens for Easy Conversational Programming - 1 - 3 Cut cycle programming - Crowning amounts are input by the desired amount on the flank of the gear - Single Index Milling  - Programmable Taper - Sizing cycle Feature (allows you to cut small numbers of teeth to make corrections) - RS-232, S Ram Card storage and Ethernet ports Machine can be equipped with the following Gashing Heads: Optional  External gashing Head (4.1) G&E Standard External Gashing Head With 40 KW Spindle Motor Head Capacities: Maximum Gear Diameter 200" Maximum Pitch Gashing 1 DP Maximum shift Tangential 0" Maximum Cutter Diameter 18" Maximum Cutter Width 5" Maximum Spindle speed 0-125 RPM Optional Internal Gashing Head (5.2) G&E Standard Internal Gashing Head Utilizing same 40 KW  Spindle Motor, w/ Direct Hook up with Quick Change Features Internal Head capacities: Minimum internal Gear Gear Clearance 32" Maximum tooth pitch 1.5 DP (17 Mod) Maximum Face width 14.2" Maximum Throat Distance 17" Spindle speed 0-125 RPM Maximum cutter Diameter 16" Maximum Cutter Width 90 mm EXTERNAL & INTERNAL HEADS CAN BE SUPPLIED AT ADDITIONAL COST (Inquire) External 4.1 Gashing Head Price  ($225,000. USD) Internal 5.2 Gashing Head Price  ($275,000. USD) Price includes your choice of either an external or internal head. Test run-off at Piselli Ent location & loading on customers trucks. Installation can be quoted based on a pit or floor mount positioning and/or as a complete job or on an hourly basis. Customer is responsible for all rigging, unloading, foundation work, cat walk or any other safety measures deemed necessary. Piselli Enterprises would quote for supplying the labor for completing the machine wiring, hook-up, and final installation, once machine is properly placed in its final position by customer. Piselli enterprises can also quote the Operator training as well on site. Customer is responsible to supply all parts, tooling and blanks for its run-off. If nothing is available from customer then Piselli Ent will supply and charge customer back for tooling and any additional charges. Terms: 40% down with order 50% upon runoff at Piselli Ent. Balance of 10% 15 days after shipment and or 30 days after installation if Piselli ent is contracted to install machine IN USA Location. Original foundation drawings and manuals are also included with machine purchase. Please contact us to discuss your particular parts you require as we are happy to work with you in assisting with acquiring the proper tooling for your work.
売り手について

このタイプのリストを参照してください

thumb

GOULD & EBERHARDT 60S-2

Gasherギアカッター

2017 | アメリカ合衆国
thumb

GOULD & EBERHARDT 120/8000-GH DEMO

Gasherギアカッター

新しい在庫がある | 2010 | アメリカ合衆国
thumb

GOULD & EBERHARDT 120-G

Gasherギアカッター

使用 - 優れました | 2009 | アメリカ合衆国
thumb

GOULD & EBERHARDT 96-GH GASHER

Gasherギアカッター

2009 | North Carolina, アメリカ合衆国
すべてを表示

このブランドのためのより多くのリストを参照してください

thumb

GOULD & EBERHARDT 36HS

ギアー ホバー

Ohio, アメリカ合衆国
thumb

GOULD & EBERHARDT

ギアー ホバー

Ohio, アメリカ合衆国
thumb

GOULD & EBERHARDT 96H

ギアー ホバー

アメリカ合衆国
thumb

GOULD & EBERHARDT 120 TWG

ギアー ホバー

North Carolina, アメリカ合衆国
すべてを表示