見る

歯車形削り盤FELLOWS 18-5

アメリカ合衆国

概要

ブランド
モデル
ID
473700
場所
アメリカ合衆国
在庫No.
4040
詳細
Fellows Model 18-5 Gear Shaper. 18" max Diam. 6" stroke, 5" Face, 7.5" Column Positioning, auto cycle, cutter at top, gears and tooling.
スペック

スペックシート

This Fellows Model 18-5 machine is a very Unique & Rigid machine. It has the vertical cutter slide feature of 7.5" of travel which allows you to bring your stroking spindle up and down and into parts. Tricky internal hubs are easily cut with this style machine. No need to spend big $$ Dollars on later model CNC Shapers if this machine can do your parts!! Machine Specifications as follows: Maximum Diameter External................................................18" Maximum Diameter Internal................................................18" Maximum Stroke length.....................................................6" Maximum Face Width........................................................5" Maximum Column Vertical Stroke Positioning..............................7.5" Maximum Pitch Spur Gear................................................3 DP Maximum Pitch Helical Gear.........................4 DP (with proper guides) Max Helical angle depends on cutter and Guide....................45 degrees Spindle Diameter..........................................................4" Stroking speed range.............................................30-440 SPM Table Diameter...........................................................13" Hole in Table..........................................................5.87" Centerline of spindle to Centerline of Table........................0" - 14" Cutter Slide height above table Min/ Max.........................10" / 17.5" Max OD of part fixture...................................................24" Power requirements...............................................460v /3/60 Machine Dimensions L x H x W.............................12' x 8' x 6' wide Machine weight...................................................18,000 Lbs Machine is equipped with the following: * Column Stroke positioning of 6" * Cutter at Top * Auto cycles * Ball screw on Infeed * Driven by 7 A/C Electric motors * Cutter Adaptor * Misc Change Gears * Misc tooling * Electrical Panel * Hydraulic Unit * operators and parts Manuals ** This machine is a very rigid production style machine. The upper assembly providing the stroke positioning can be moved up and down almost 7.5" to get in and out of hard to reach parts, along with its 6" stroke Length capacity it's a must for any production house or job shop!! Machine can be inspected under power with proper notice in our NC Warehouse.
売り手について

このタイプのリストを参照してください

FELLOWS FS-180

歯車形削り盤

中古品 - 良いです | 1993 | アメリカ合衆国
thumb

STANKO 5M150 NC

歯車形削り盤

大韓民国
thumb

STANKO IS - S 1000

歯車形削り盤

大韓民国
thumb

TOKYO KIKAI TF-64

歯車形削り盤

台湾
すべてを表示

このブランドのためのより多くのリストを参照してください

FELLOWS FS-180

歯車形削り盤

中古品 - 良いです | 1993 | アメリカ合衆国
thumb

FELLOWS

ギアー 付属品

Michigan, アメリカ合衆国
thumb

FELLOWS 4B STEERING SECTOR

歯車形削り盤

1976 | Connecticut, アメリカ合衆国
thumb

FELLOWS 615A

歯車形削り盤

中古品 - 良いです | 1941 | アメリカ合衆国
すべてを表示