見る

ホールデイング 機械ERBEND MFD 3220

Wisconsin, アメリカ合衆国

概要

ブランド
モデル
ID
489968
条件
新しい在庫がある
場所
Wisconsin
アメリカ合衆国
在庫No.
JR
詳細
Erbend is a folding machine line from Mac-Tech, which was founded in 1984 to provide premium Metal fabricating machinery and services to the manufacturing community. This new line is an exciting offering that brings great value and performance to our customers. We utilized a common platform of software, CNC and electronics that our press brake products use for efficient support and training. Metal folding has been a part of our company history for over 30 years and Mac Bend is offered with great pride, knowledge and support. Thank you for your consideration and keep on bending America!
スペック
メトリックに仕様を変換します
最大 厚さ0.078"
最大 厚さ (ゲージ)14 gauge
全体の長さ10.49'
大きさ98.4” / 175.19” / 74.80"
重量12,500 lbs

スペックシート

STANDARD TECHNICAL SPECS MAX FOLDABLE SHEET LENGTH: 10.49 ft (3220mm) MAX THICKNESS CAPACITY IN FULL LENGTH: 2mm, 0.078’” (14g) STEEL CLAMPING BEAM (Z AXIS) OPENING HEIGHT (NO TOOLS): 6.3 in (160.02 mm) CLAMPING SPEED: 2.36 in/sec FOLDING BEAM (Y AXIS) FOLDING ANGLE: 0 - 150° FOLDING SPEED: 65°/sec FOLDING BEAM ADJUSTMENT (A AXIS) ADJUSTMENT HEIGHT: 1.37” (35mm) ADJUSTMENT: Manual 1M BACK GAUGE SYSTEM (X AXIS) SPEED: 9.8 in/sec MIN/MAX GAUGING: 0.078” / 39.37” (2 mm / 1000mm) ROTATION OF THE CLAMPING BEAM (C AXIS) ROTATIONAL SPEED: 20°/sec -AC Motorized drive of X, Y, Z, C (Clamping, Folding, Back Gauge, Clamping Rotation) - Thanks to 180 ° rotating 2 station clamping beam, according to your part and programming, the beam can switch to desired station and make you easily do the deep/box bending or long/profile bendings at the same machine, just in seconds, without changing the tool set-up. -With its 6.29” stroke capacity, you can do box/pan bending up to 3.54” depth -Thanks to its brass and oil-free friction plates on the linear guides, you can work for years without any lubrication or maintenance - Protective bellows prevent dirt or dust from entering system increasing system longevity. BACK GAUGE AND SHEET SUPPORT TABLE (standard) -Standard back gauge system comes with: -1000 mm servo motorized back gauge arms – min gauge: 6 mm – max gauge:1000 mm -1000 mm long sheet support table with ball casters -Flat rail bottom beam with Feather Grooves. ERFOLD BASIC CNC LINE BY LINE CONTROLLER (Standard) -15.6 ‘’ touchscreen PC based controller on swivel arm - Line by line part programming by entering numerical values of the axes - Creating, saving, loading parts with different names, materials and sheet thicknesses - Open or drop hemming function - Multi radius bending function - 16 gb memory for unlimited receipt storage - Manual axis controls, alarm and error indications, machine detailed parameters Controller Erfold Basic CNC Line By Line Controller STANDARD SAFETY FEATURES -3-switch foot pedal with panic button function on two steps - (Step on left pedal = clamping beam goes up immediately) - (Step on middle pedal = folding beam and all axis stops immediately) Front light barriers: -For operator safety, front light barriers are located at the left and right front side of the machine, managed by safety plc and prevent unwanted interventions of body, foot or finger to avoid accidents especially during the working at the back side of the machine. LED function lights: -These lights Indicate machine status and the placement makes it easy to see from anywhere on the production floor. Light color codes; -Red – Emergency stop / error mode - Blue – Manual control/setup mode Manual Folding beam Adjustment A Axis (Standard) -Manual Adjustability: 1.37” (35mm) BEAM GEOMETRY AND TOOLING (Sharp Nose) -R1 or 20° sharp nose full length clamping beam tool -42CrMo4 grinded material -Folding beam tools -42CrMo4 grinded material – as 2 sets 0.39” (15mm) and 1” (25mm) widths BEAM GEOMETRY AND TOOLING ( GOATS FOOT) -3.54” (90mm) Sectionalized Goats Foot Tooling -42CrMo4 grinded material, nose part is 60 HRC laser surface hardened whole body is darkened against corrosion - Segmented between 0.78” – 19.6” lengths (3.93” x 2 pcs corner tools included) - Bottom beam tools: 42 CrMo4 grinded material
売り手について

このモデルの詳細

詳細情報を表示するにはERBEND MFD 3220ブランド情報、写真、ビデオ、および多くを含むが、 ここをクリック

このタイプのリストを参照してください

thumb

RAS 79.05 MINIBENDCENTER

ホールデイング 機械

使用 - 優れました | 2011 | Georgia, アメリカ合衆国
thumb

RAS 73.40

ホールデイング 機械

中古品 - 良いです | 2004 | Georgia, アメリカ合衆国
thumb

SCHRODER SPB 3200/3.0

ホールデイング 機械

使用 - 優れました | 2006 | Wisconsin, アメリカ合衆国

RAS 79.22

ホールデイング 機械

使用 - 優れました | 1998 | Georgia, アメリカ合衆国
すべてを表示

このブランドのためのより多くのリストを参照してください

thumb

ERBEND MFC 3215

ホールデイング 機械

新しい在庫がある | Wisconsin, アメリカ合衆国
thumb

ERBEND MFAS 3230

ホールデイング 機械

新しい在庫がある | Wisconsin, アメリカ合衆国
thumb

ERBEND MFB 3220

ホールデイング 機械

新しい在庫がある | Wisconsin, アメリカ合衆国
thumb

ERBEND MFE3240

ホールデイング 機械

新しい在庫がある | 2021 | Wisconsin, アメリカ合衆国
すべてを表示