見る
見る

水平テーブルタイプボーリングミルズFERMAT WFT 13

Ohio, アメリカ合衆国

概要

ブランド
モデル
ID
490899
条件
新しい在庫がある
2022
場所
Ohio
アメリカ合衆国
詳細
FERMAT WFT 13 CNC Table Type HBM 5.1" spindle; FANUC 31iB. In stock at factory, price is Installed. Can be equipped with Linear scales & Reinshaw RMP 60 Probe. The most popular FERMAT table-type horizontal boring mill, for high-performance machining with maximum utilization of accessories and automatic milling heads for efficient machining of workpieces of up to 20 tons. • Spindle diameter 130 mm or 110 mm; spindle travel 800 mm. • Optional ram stroke 700 mm. • Powerful and precise milling, coordinate drilling, boring, and threading. • Extremely versatile series of table-type horizontal boring mills, fully compatible with a wide range of accessories and automatic milling heads.
スペック
メトリックに仕様を変換します
スピンドル サイズ5.1"
表のX HORIZ TVL157.5"
ヘッドのYヴェールTVL98.5"
パワー50 hp
回転数3,000 RPM
表A-W78.7"
表A-L86.61"
スピンドルTVL。31.5"
大きさ354.3"L x 377.9"W x 210.6"H
重量107,000 lbs

装備

WFT 13 Table Type HBM Linear Heidenhain Scales: X/Y/Z Axes Spindle Support Sleeve 250 mm Probe: Reinishaw RMP 60 Part Probe System Automatic Tool Changer: 40 Tools Coolant Through Spindle: 20 bar High Pressure Unit Outside Coolant System: 6 bar low pressure Chip Conveyor Belt Type including level switch and return Filtration Pump Auto Lube System for Slide Box Ways Air-Conditioned Electric Cabinet Preparation for Manual Heads Most popular FERMAT table-type horizontal boring mill, for high-performance machining with maximum utilization of accessories and automatic milling heads for efficient machining of workpieces of up to 20 tons | 44093 lbs. • Spindle diameter 130 mm | 5.1 in or 110 mm | 4.3 in; spindle travel 800 mm | 31.5 in. • Optional ram stroke 700 mm | 27.6 in. • Powerful and precise milling, coordinate drilling, boring, and threading. • Extremely versatile series of table-type horizontal boring mills, fully compatible with a wide range of accessories and automatic milling heads.

スペックシート

Diameter of Spindle | in 130 | 5.1" Taper of Spindle ISO50 / SK 50 Max. Spindle Speed rpm 3,000 Main Power FANUC CNC (S1/S3) kW | hp 37 / 45; 53 / 62 | 49.6 / 60.3; 71 / 104.4 Max. Torque FANUC CNC (S1/S3) Nm 2362 / 2873; 2713 / 3989 X Cross Travel of Table | in 157.4 / Y Vertical Travel of Headstock in 98.4 Z Longitudinal Travel of Column | in | 59 W Spindle Travel | in 800 | 31.5 V Ram Travel | in x 700 | 27.5 Rapid Feed X, Y in/min 590.5, 472.4 Rapid Feed Z, W, V [n/min 334.6, 393.7, 472.4 Rapid Feed B rpm 2 (optionally 5) Max. Table Load | lb 44092 Table Size in 78.7 x 86.6 * A large number of accessories are available.
売り手について

このモデルの詳細

詳細情報を表示するにはFERMAT WFT 13ブランド情報、写真、ビデオ、および多くを含むが、 ここをクリック

このモデルのより多くのリストを参照してください。

thumb

FERMAT WFT 13

水平テーブルタイプボーリングミルズ

新しい在庫がある | 2022 | Ohio, アメリカ合衆国
thumb

FERMAT WFT 13

水平テーブルタイプボーリングミルズ

新しい在庫がある | 2023 | アメリカ合衆国
thumb

FERMAT WFT 13

水平テーブルタイプボーリングミルズ

使用 - 優れました | 2011 | Ontario, カナダ

このタイプのリストを参照してください

thumb

SCHARMANN HEAVYCUT 1Z/TDV3

水平テーブルタイプボーリングミルズ

1995 | アメリカ合衆国
thumb

GIDDINGS & LEWIS G60-T

水平テーブルタイプボーリングミルズ

Oklahoma, アメリカ合衆国
thumb

NOMURA B-100WP

水平テーブルタイプボーリングミルズ

台湾
thumb

GIDDINGS & LEWIS 70A-DP4-T

水平テーブルタイプボーリングミルズ

1969 | Pennsylvania, アメリカ合衆国
すべてを表示

このブランドのためのより多くのリストを参照してください

thumb

FERMAT WFC 10

水平テーブルタイプボーリングミルズ

新しい在庫がある | 2022 | チェコ共和国
thumb

FERMAT BHM/R 50/60 CNC

ユニバーサル円筒研削盤

新しい在庫がある | 2022 | チェコ共和国
thumb

FERMAT PBM 1640 CNC

フライス加工、掘削複合機械

中古品 - 良いです | 2011 | チェコ共和国
thumb

FERMAT WRF 130 CNC

水平フロアタイプボーリングミルズ

中古品 - 良いです | 2012 | アメリカ合衆国
すべてを表示