STOCK NO. ET-5397 QPAC Q199HD-60-7 Heavy Duty Crankshaft Lapping/Micropolishing Machine Make: QPAC Model: Q199HD-60-7 Maximum Crankshaft Length: 60” Maximum Stroke: 11” Maximum Diameter: Mains & Pins: 5.5” Maximum Part Weight: 400 lbs. Machine Description: Item 1.00 (1) QPAC Model No. Q199HD-60-7 Heavy-Duty Micropolisher for various crankshafts. This machine is designed to allow Micropolish Arm units to slide behind headstock and tailstock. This allows up to (7) polishing units that can traverse the entire length of workpiece. Item 1.01 (1) QPAC Heavy-Duty Base Assembly (QA460) designed for coolant and 60 inch long workpiece. Item 1.02 (1) QPAC Heavy-Duty Headstock (QA307) with variable speed drive for spindle rotation with electric motor (2 HP, 1800 RPM) and with automatic CW and CCW spindle rotation Item 1.03 (1) QPAC Oscillation Unit (QA311) with .06 inch oscillation with variable speed drive Item 1.04 (1) QPAC Spindle Drive Unit (QA209) with variable speed drive. Item 1.05 (1) QPAC Heavy-Duty Tailstock (QA455) (pneumatic quill type) with live center and replaceable center tip. (heavy duty tailstock equipped with Tailstock manually operated mechanical advantage rack and gear for adjusting various length parts. Item 1.06 (4) QPAC Heavy-Duty Micropolish Arm Units (QA456-LH, QA457-RH) (diesel size) with manual arm positioning, advancement and retract. Arm Units include adjustable side wear plates, pressure control valves for Micropolishing process and mounted on linear slide unit. Item 1.07 (2) QPAC Micropolish Arm Units (QA468-LH, QA466 RH) (automotive size) with manual arm positioning, advancement and retract. Arm Units include adjustable side wear plates, pressure control valves for Micropolishing process and mounted on linear slide unit. Item 1.08 (1) QPAC Crankshaft Thrustwall Micropolish Unit (QA468) mechanical expansion, retract, linear slide, pressure regulator and tooling. Item 1.09 (1) QPAC Linear Assist Drive Assemble (QA461) Item 1.10 (6) QPAC Linear Assist Clamp Assemblies (QA458) Item 1.11 (12) Brake Units per slide (QA312) with (2) per MP Arm. Item 1.12 (7) QPAC Automatic Abrasive Film Indexer Units (QA399) with adjustable index. Item 1.13 (7) QPAC Film Holders (QA342). Item 1.14 (1) Lot Electrical control equipment, PLC, (NEMA 12 enclosure) (460V, 3 phase, 60 cycle), safety cycle buttons, machine mounted enclosure and control panel. (PLC – SLC 500) (Programming is done via Rockwell Software RS Logix-500) Item 1.15 (1) QPAC Micropolishing Certification System -Tailstock will not retract until all bearings are Micropolished properly. Color diagram of crankshaft on Panel View changes color of each bearing from red to green to show Micropolish process on that bearing is complete. This information can be downloaded to your host computer for warrant issues, etc. This system includes a manual type teach system which allows the operator to program for each crankshaft. (Designed for 80 crankshaft programs) Item 1.16 (1) 32 Gallon – Coolant Filtration System, includes pump, reservoir, electric motor and bag type filter with automatic coolant application and coolant base flush hose and hose reel. (Water soluble or oil) Location:  Wixom, MI, USA