歯車試験機GLEASON 19
Puebla, メキシコ概要
The No. 19 Hypoid Lapper is designed to lap 90° shaft angle spiral bevel and hypoid gears and pinions. The machine consists fundamentally of two heads containing spindles in which mating gears and pinions can be mounted to run together in their normal positions. The machine is also equipped with a manual brake for applying a load to check tooth contact. The machine is equipped with a system of lapping guards of which the outer door automatically closes and opens at the beginning and end of the lapping cycle.
メトリックに仕様を変換します
| 最大径 ギアー | 17" |
| タイプ | Hypoid Tester |
| 大きさ | 64" x 90" x 78" |
| 重量 | 10,500 Lbs |
装備
COPY OPERATING AND MAINTENANCE INSTRUCTIONS, LAPPING COMPOUND PUMP, CLEAN, RECENT PAINT, UNDER POWER FOR INSPECTION, WARRANTY AS IS.
スペックシート
Max Diameter Gear 17” 432 mm
Min.Dist.CTRL gear spindle/pinion 6.25” 159 mm
Max.Dist.CTRL gear spindle/pinion 10.50” 267 mm
Max.Dist.CTRL of pinion spindle/Gear 5” 127 mm
Max.Dist.CTRL of Pinion Spindle/Gear 10.75” 273 mm
Offset 3” 76 mm
MAXIMUM SET OVER
Vertical & Horizontal .040” 1 mm
Backlash .150” 3.81 mm
SPINDLES
DIAMETER TAPER HOLE, LARGE END 3-29/32” 99.21 mm
TAPER PER FOOT 39/64” 15.47 mm
DEPTH OF TAPER 6” 152.40 mm
DRIVE SPINDLE SPEEDS 600 & 1200 RPM
DRIVE
Spindle Drive Motor 2.5 Hp 900 RPM 1.86 kw
Hydraulic Motor ¾ Hp 1800 RPM .55 kw
Lapping Compound Pump Motor 1/2 Hp 1800 RPM .37 kw
Oscillating Drive Motor 1/15 Hp 1725 RPM .14 kw
Floor Space 64”x90”x78” 1625x2285x1981 mm
Net Weight 10,500 Lbs 4,762 Kgs
