エンジン旋盤SHARP 1640L

California, アメリカ合衆国

印刷用フォーマット

概要

ブランド

SHARP

モデル

1640L

510883

タイプ

エンジン旋盤

条件

新しい在庫がある

年

2023

場所

California
アメリカ合衆国

在庫No.

21465

詳細

Introducing the SHARP Precision Engine Lathe Model 1640L. This new equipment boasts a swing of 16" and a center distance of 40". With a powerful 7.5 hp motor and a spindle speed range of 40-2,000 RPM, it is perfect for your precision machining needs. Don't miss out on this professional-grade lathe.

スペック

メトリックに仕様を変換します

スイング	16"
センター	40"
スピンドルボア	3.0625"
パワー	7.5 hp
回転数	2,000 RPM
スイング　オーバー　クロス　スライド	8.75"
大きさ	7.05'L x 2.66'W x 3.9'H
重量	3,600 lbs

装備

 Bison 3-Jaw Chuck 10”  Coolant System  Halogen Work Light  Face Plate (16”)  Steady Rest (1/2” – 6”)  American Tool Post  Full Length Splash Guard  Follow Rest ( 0.59” – 2.76”)  Longitudinal Carriage Stops  Center sleeve ( MT 5 x 3)  Dead centers ( MT# 4x1, MT # 5 x1)  User can choose either 220V or 440 V . 575 V needs an optional transformer  Tool Kit includes: Machine Manual, Half Nut Wrench, Wrench 17m, 19m, Set of 6 Allen wrenches, Phillip Screw Driver, Flat Head Screw Driver, Oil can, Grease Gun, Rear Way Cover Bracket, 2 set of dead center, Pin for Indicator, Can of Paint OPTIONAL ACCESSORIES: •3 - Jaw 12” Chuck (QU) in lieu of the 3 - Jaw 10” (Standard Equipment) 3J12D8 add $ 330.00 NET 3-Jaw 12” Chuck (QU) 3J12D8 $ 1,290.00 •4 - Jaw 12” Chuck (QU) 4J12D8 $ 1,220.00 •3 - Jaw Chuck 10” (Bison) 803-1038 $ 1,980.00 •3 - Jaw Chuck 12” (Bison) 803-1238 $ 2,835.00 •4 - Jaw Chuck 12” (Bison) 853-1238 $ 2,180.00 • Chuck Guard( factory order only) 18C-01 $ 590.00 • Installation of chuck guard net $ 195.00 • Tool guard ( factory order only) TG 16 L $ 2,060.00 • Lead screw guard ( factory order only) LSG-1640 L $ 1,640.00 • Guard behind spindle( factory order only) GBS-16L $ 90.00 • UL/CSA switch board/UL motor/CSA pump in lieu of regular version UL/CSA-16 ( factory order only) $ 1,860.00 ** NOTE: SHARP DOES NOT PROVIDE UL/CSA STICKERS ON THE MACHINES, BUYERS NEED TO CONTRACT A LOCAL AGENCY TO REVIEW THE ISSUES THEN PUT "COMPLIANCE" STICKERS ON THE MACHINES AFTERWARDS. All heighted items are factory order only and all guards are needed for UL compliance certificate *** UL compliance certificate issued by CSA Group in Los Angeles with all highlighted parts above Net $ 4,750.00 • Micrometer Carriage Stop 18C-02 $ 225.00 • 4-Way Toolpost for 16” Swing Lathe 18C-05 $ 770.00 • Installation of 18C-05 $ 470.00 • Taper Attachment ( factory installed) 18C-03 $ 3,765.00 • Roller Jaws for Steady Rest 18C-04 $ 690.00 • (Extra) Steady Rest 16” for Lathes (1/2 – 6” Capacity) 16C-01 $ 865.00 • Steady Rest for 16” Lathes (4 – 9” Capacity) 16C-09 $ 1,720.00 • Drill & Arbor (JACOBS) 16/18-D/A $ 520.00 • Quick Change Tool (7 pcs) Holder Set (Aloris) CXA-2511-7250 $ 2,650.00 • Live Center – Royal (Dual Bearing) MT#4 10854 $ 495.00 • Live Center – MT#4 LC-MT4 $ 240.00 • 5C Collet Set (1/8” to 1-1/16” by 1/16”) 16 pcs.ACC-5C $ 495.00 • 5C Collet Closer for 16 / 18” Lathe (Atlas) CCD1-8 $ 2,435.00 • 575 V/440V/380V transformer, please select 440 T 10 net $ 1,755.00 • 10 HP motor in lieu of 7.5 HP with inverter ( factory order) $ ,595.00 DIGITAL READ OUT SYSTEMS: • Fagor 20i D.R.O. FG-1640 $ 2,590.00 • Fagor 40i D.R.O. FG-40i-1640 $ 3,780.00 • Acu-Rite 203S D.R.O. AR-1640 $ 2,750.00 • Newall DP700 D.R.O. NWDP-1640 $ 2,885.00 Factory Installation for all D.R.O. systems $ 680.00 NET Note: All prices and specification subject to change without notice.

スペックシート

Specifications: Swing Over Bed: 16″ Swing Over Cross Slide: 8 3/4″ Swing Over Gap: 24 3/8″ Width of Gap: 9 3/4″ Center Height from Top of Compound: 1.9″ Distance Between Centers: 40″ Spindle Nose Type: D1-8 Camlock Spindle Bore: 3 1/16″ Spindle Speeds: 40 – 2,000 RPM (12 Steps) Taper of Spindle Bore: MT # 6 Taper of Center: MT # 4 Longitudinal Feeds: 0.002″ – 0.032″ /Rev. Cross Feeds: 0.0001″ – 0.0094″ /Rev. Inch Threads: 4 – 56 TPI Metric and Module Threads: 0.5 – 7 mm Leadscrew Pitch, Diameter: 4 TPI. 1 3/8″ Cross Slide Travel: 8.7″ Compound Rest Travel: 4.9″ Compound Width: 4 1/2″ Bed Length: 59″ Bed Width: 11 3/4″ Quill Travel: 5″ Quill Diameter: 2 1/4″ Quill Taper: MT # 4 Motor: 7.5 HP / 220v, 440v / 3ph Machine Weight 3,600 lbs STANDARD ACCESSORIES: 3-jaw chuck. (10”) Steady rest with bronze tip (1/2-6”) Follow rest Face plate (16”). Coolant system. American toolpost. Halogen work light. Longitudinal carriage stops. Tool kit. Full length Splashguard. OPTIONAL ACCESSORIES:  3 - Jaw 12” Chuck (QU) in lieu of the 3 - Jaw 10” (Standard Equipment) 3J12D8 add $ 330.00 NET 3-Jaw 12” Chuck (QU) 3J12D8 $ 1,290.00  4 - Jaw 12” Chuck (QU) 4J12D8 $ 1,220.00  3 - Jaw Chuck 10” (Bison) 803-1038 $ 1,800.00  3 - Jaw Chuck 12” (Bison) 803-1238 $ 2,575.00  4 - Jaw Chuck 12” (Bison) 853-1238 $ 1,980.00  Chuck Guard( factory order only) 18C-01 $ 590.00  Installation of chuck guard net $ 195.00  Tool guard ( factory order only) TG 16 L $ 1,870.00  Lead screw guard ( factory order only) LSG-1640 L $ 1,490.00 Guard behind spindle (factory order only) $75.00 UL/CSA switch board/UL motor/CSA pump in lieu of regular version UL/CSA-16 (factory order only) $1,550.00 Note: SHARP does not provide UL/CSA stickers on the machines, Buyers need to contract with a local agency to review the machine and then put "Compliance" stickers on the machine afterwards. Factory order.