見る

歯車試験機GLEASON 27M

アメリカ合衆国

概要

ブランド
モデル
27M
ID
526083
条件
使用 - 優れました
場所
アメリカ合衆国
在庫No.
24981
詳細
GLEASON 27M BEVEL GEAR TESTER
スペック
メトリックに仕様を変換します
タイプHYPOID
最大径 ギアー36.5"
大きさ68" x 69"
重量7,000#

装備

Automatic Backlash Control Spindle Taper Adapter Motors and Controls Hand Remote Worklight

スペックシート

Specifications: Distance from center of gear spindle to nose of pinion spindle (maximum): 26" (660mm) Distance from center of gear spindle to nose of pinion spindle (minimum): 6" (152mm) Distance from center of pinion spindle to nose of gear spindle (maximum): 18" (457mm) Distance from center of pinion spindle to nose of gear spindle (minimum): 5" (127mm) Offset of gear spindle above center of pinion spindle (maximum): 5.5" (140mm) Offset of gear spindle below the center of pinion spindle (maximum): 3.5" (89mm) Diameter of gear (maximum): Bevel/Hypoid Gears w/ pinion below center of gear: 36.5" (927mm) Hypoid Gears with pinion 1" above the centerline of gear: 34.5" (876mm) Hypoid Gears with pinion 2" above the centerline of gear: 32.5" (825mm) Hypoid Gears with pinion 3" above the centerline of gear: 30.5" (774mm) Hypoid Gears with pinion 3.5" above the centerline of gear: 28.5" (724mm) Pinion Spindle: Diameter of taper hole at large end: 6" (152mm) Taper per foot: 0.75" (19mm) Depth of taper: 6" (152mm) Diameter of hole through spindle: 5 9/18" (141mm) Gear Spindle: Diameter of taper hole at large end: 3 29/32" (100mm) Taper per foot: 39/64" (15mm) Depth of taper: 6" (152mm) Diameter of hole through spindle: 2.5" (64mm) Electrical Equipment: Main Motor - 2 Speed: 7-1/2 / 3-3/4 HP, 1800/900 RPM Lapping Pump Motor: 1/2 HP, 1800 RPM Drive Spindle: 900/450 RPM Floor Space: 68" x 69" (173mm x 175mm) Net Weight: 7,000 Lbs. (3,175kg) Shipping Weight, Boxed for Export: 7,800 Lbs. (3538 kg)
売り手について

このタイプのリストを参照してください

thumb

GLEASON 17

歯車試験機

中古品 - 良いです | アメリカ合衆国
thumb

HAMAI 5LD

歯車試験機

台湾
thumb

GLEASON 513

歯車試験機

中古品 - 良いです | イタリア
thumb

OSAKA SEIMITSU GC-3H

歯車試験機

台湾
すべてを表示

このブランドのためのより多くのリストを参照してください

thumb

GLEASON 529

ギアー クエンチング プレス

Ohio, アメリカ合衆国
thumb

GLEASON 36

ギアー クエンチング プレス

Ohio, アメリカ合衆国
thumb

GLEASON 609

かさ歯車ジェネレータ

中古品 - 良いです | アメリカ合衆国
thumb

GLEASON 610

かさ歯車ジェネレータ

中古品 - 良いです | アメリカ合衆国
すべてを表示