雑誌の種類バーローダーEDGE PATRIOT 551
アメリカ合衆国概要
Edge Technologies Patriot 551 Automatic Bar Loader, Full 6' bar cap, New 2010
Can load up to 8' bars, 52mm channel
メトリックに仕様を変換します
能力 | 2" |
棒 長さ | 8' |
Length of Spindle Type? | No |
Synch for Sliding Headstock? | No |
Axial Shift? | No |
大きさ | 128" x 28" x 49" |
重量 | 2200# |
装備
Configured with a 52 mm Channel set
(additional channel sets available from OEM)
New Replacement $38K
originally on an Okuma Crown 762S-BB; should configure to almost all CNC Turning Centers
スペックシート
To the best of our knowledge all details listed below are deemed correct.
It is the buyer's responsibility to confirmed prior to purchase.
General Specifications per Manufacturer
Bar Capacity:
No Prep: 5mm to 44.5mm (.196" to 1.75")
With Prep: 5mm to 51 mm (.196" to 2.000")
Maximum Bar Length: 8'
Minimum Bar Length: 39.4"
Maximum Remnant Length: 16"
Magazine Rack Capacity: 12"
Bar Loading Cycle: 30 seconds for 12' bar
Material Straightness Specifications: .007"TIR/ft of material
(V Blocks, 3 points equidistant)
Feed Force (pusher torque): max 450N, adjustable
Foward Feed Rate: 750 inches/min max, adjustable
Return Feed Rate: 1000 inches/min max, adjustable
Power Consumption: 1.5kW
Operating Voltage: 230V/60 Hz - 3 phase
Control Voltage: 24V DC
Oil Capacity: 57 liters (15 gallons)
Oil Viscosity: ISO 150cST
Compressed Air Supply: 6 bar (90 psi)
Compressed Air Consumption: approx. 8 liters/loading cycle
Barfeed: 128" x 28" x 49" 2,100 lbs
このモデルのより多くのリストを参照してください。
EDGE TECHNOLOGIES PATRIOT 551
雑誌の種類バーローダー
EDGE TECHNOLOGIES PATRIOT 551
雑誌の種類バーローダー
EDGE PATRIOT 551
雑誌の種類バーローダー
EDGE PATRIOT 551
雑誌の種類バーローダー
このタイプのリストを参照してください
すべてを表示このブランドのためのより多くのリストを参照してください
EDGE PATRIOT 551
雑誌の種類バーローダー
EDGE PATRIOT 551
雑誌の種類バーローダー
EDGE PATRIOT 551
雑誌の種類バーローダー
EDGE PATRIOT 551
雑誌の種類バーローダー