4' x 12" SHARP Model RD-1230 RADIAL ARM DRILL PRESS New 2000 This is a high performance machine ideal for drilling, tapping , boring, reaming, lapping, screwing, counter boring, spot facing, and much more, on materials such as cast iron and steel. Features 12” column diameter MT#4 spindle, 5 HP motor 48” column to spindle center Drilling: 2.18” cast iron, 1.62” steel Boring: 4.75” cast iron, 3.37” steel Hardened and ground arm slide ways and gears Double tube column design to increase rigidity Arm elevation controlled by electric motor Manually operated arm, head, clamping Safety device prevents arm from dropping even when bronze nut is worn out Spindle depth setting with automatic kickout Auto reverse tapping function T-slots and drain channels on box table

Specs: Diameter of column: 11.81 in. Distance from column surface to spindle center, max.: 48.5 in. Distance from column surface to spindle center, min.: 13.37 in. Travel of spindle head: 35 in. Distance from base surface to spindle end, max.: 54 in. Distance from base surface to spindle end, min.: 19.37 in. Elevating height of arm: 2.88 ft. Effective area of table: 27.62 x 19.62 x 15.75 in. Dimensions of base: 67.68 x 27.93 x 6.5 in. Taper hole in spindle: MT #4 Stoke of spindle: 9.87 in. R.P.M. of spindle (rpm range x steps): 44-150 x 12 steps Feed of spindle (1PR x steps): 0.002-0.006 in. x 3 steps Main motor (HP): 5 HP (2 speed motor) Elevating motor (HP): 1 HP Clamping motor for column and gear-box (HP): 1 HP Clamping motor for arm (HP): 1 HP Coolant pump (HP): 0.12 HP Machine height from floor, max.: 9.12 ft Measurement (LxWxH): 6.66 x 3.25 x 7.41 ft. Approximate shipping weight: 4,950 lbs. Cast Iron Drilling: 2.18 in. Capacity Tapping: 1.5 in. Boring: 4.75 in. STEEL Drilling: 1.62 in. Capacity Tapping: 1 in. Boring: 3.37 in. TOTAL POWER CONSUMPTION 220V: 8 KVA/25 amps 440V: 8 KVA/12.5 amps STANDARD ACCESSORIES: Box table Coolant system Work light