ARONSON SKYHOOK溶接 ポジショナー

ID:952
ブランド:ARONSON
モデル:SKYHOOK
タイプ:溶接 ポジショナー
年:1986
売り主:販売者が誰であるかを見せて...
場所:Ohio
アメリカ合衆国
在庫No.:K11791
価格:

スペック

Lower:90
ワークの最大重量:1,134 kg


ARONSON "SKYHOOK" 2500 LB WELDING POSITIONER
Model RHS10/T2.5-30SD/RLA-CY, New 1986, S/N 869
Stock # K11791

MACHINE DISCRIPTION: The Aronson "SKYHOOK" is Designed to give you
Full 360 Degrees of Tilt along with 360 Degrees of Rotation. This is
accomplished by Mounting a Turn Table onto a Horizontal Beam and then
Mounting the Horizontal Beam onto a Headstock. The Beam is Mounted 24"
Below the Tilt Axis of the Headstock and the Turn Table Center is 30"
From the Headstock. The Turn Table is 38" in Diameter and uses
Pre-loaded Slew-ring roller bearings which provides an 18-1/2" Diameter
Thru-Hole in the Table. Both Axis are equipped with Getty's Servo Motors
and Feedback Encoders.

EQUIPPED WITH: 38" Table with (4) 3/4" Radial T-Slots, 18.5" Thru-Hole,
Getty's Servo Motors and Encoders, Automatic Backlash Control, Auxiliary
Brake on Input Shaft, Zero Pin and Visual Zero Indicator, NEMA Dust
Tight Electronics.

CATALOGUE SPECIFICATIONS:
Table Diameter ...................................... 38"
Hole Thru Table...................................... 18"
Max Swing............................................ 60"
Table Weight Load Capacity........................... 2500 lbs
Table Weight Load Capacity 48" Above Table........... 2500 lbs
Rotation Speed....................................... 0 to 2 RPM
Rotation Torque...................................... 7,500 lb/in
Tilt Speed........................................... 0 to 2 RPM
Tilt Torque.......................................... 60,000 lb/in
Distance Floor to Table Top.......................... 36"
Electrics............................................ 440/3/60
Approximate Machine Dimensions....................... 92" x 92"
Approximate Machine Height........................... 88"
Approximate Machine Weight........................... 7,500 LBS

CONDITION: Appears to be in Excellent Condition! New Replacement
Cost from Aronson is Over $ 78,000. !

詳細

2,500 LB ARONSON “SKYHOOK” WELDING POSITIONER, 360 Deg Tilt, 360 Deg Rotate, 38” Table, 18-1/2” Thru Hole, 1986

このモデルの詳細

の詳細について表示するには、 ARONSON SKYHOOKレビュー、ブランド情報、写真、ビデオ、および多くを含むが、 ここをクリック