SYSTEM 3R 3R-10
System 3R Adapter For Manual Sinker 3R-10 * For mounting on the spindle of a sinker EDM to to attach a chuck or other holding devices * Currently 2 in Stock
SYSTEM 3R 3R-10
System 3R Adapter For Manual Sinker 3R-10 * Manual machine adapter plate for magnetic chuck set up. Soft plates can be drilled and tapped to suit. * 2 Available
SYSTEM 3R 3R-13.321
System 3R Mini Square Holder 3R-13.321 * Holder with hardened reference part Ø20 mm for mounting square and flat electrodes. Max. workpiece: 32x28 mm Adapted for automatic changing F...
SYSTEM 3R 3R-20-AEC
System 3R Mini Probe Assorted 3R-20-AEC * System 3R Probes on 20mm Shank Choice of: 4) 10mm Ball 1) 20mm Ball Buyers choice * 5 Available Total
SYSTEM 3R 3R-20/21-AEC-1
System 3R Mini Probe Set - 3R-20/21-AEC-1 * System 3R Probes on 20mm Shank 1) 3mm Ball on 20mm Shank 1) 3mm Straight Post on 20mm Shank * 3 Sets Available - 2-New in box 1-Used in box
SYSTEM 3R 3R-225
System 3R Wire EDM End Stop 3R-225 * Lock in position on dovetail rail to establish a repeatable location. Can be moved infinitely along the entire dovetail reference element. Hardened W...
SYSTEM 3R 3R-23
System 3R Mini Master Control Rod 3R-23 * Ground C-reference for locating Mini chuck center. Measuring length 100 mm Weight 0.6 kg. Clamping force 4000 N Reduces setting-up tim...
SYSTEM 3R 3R-23
System 3R Mini Master Control Rod and AEC Alignment Tools (Lot of 3) 3R-23 * System 3R alignment and centering tools for Mini chucks (20mm shank type) and automatic electrode changers These items...
SYSTEM 3R 3R-23
System 3R Mini Control Rod 3R-23 * Ground C-reference for locating Mini chuck center. Measuring length 100 mm Weight 0.6 kg. Clamping force 4000 N Reduces setting-up times. ...
SYSTEM 3R 3R-266.12HP
System 3R Macro Wire EDM Fixed Head Twin 3R-266.12HP * System 3R Fixed Head for MacroTwin chuck - can be loaded manually or by robot. * Setup done in seconds. * Gives maximum workpiece pre...
SYSTEM 3R 3R-266.4
System 3R Wire EDM Macro Mounting Head - HP Style 3R-266.4 * For manual mounting of SuperVice, a holder or a fixture in the Macro System. Note: All holders including HP can be mounted. * Adapted...
SYSTEM 3R 3R-27.2-4
System 3R Dovetail Style Platen for an Agie - Delite 3R-27.2-4 * This item has been gone through to make sure it is in good working condition * 1 Available
SYSTEM 3R 3R-3.321.2
System 3R Mini Spindle Indicator Holder 3R-3.321.2 * For measuring and locating hole centers and indicating workpiece square on Mini system (20mm). Dial indicator required Weight 0.4 kg....
SYSTEM 3R 3R-3.321.2
System 3R Mini Spindle Indicator Holder * For measuring and locating hole centers and indicating workpiece square on Mini system (20mm). Dial indicator required Weight 0.4 kg. Clam...
SYSTEM 3R 3R-310E
System 3R Mini 20mm Flanged Holders (Lot of 3) * Assorted flange holders with hardened reference part Ø20 mm, unhardened flange Ø50 mm, 54mm square & 20mm post hole. Adapted for automatic ch...
SYSTEM 3R 3R-311.2
System 3R Mini Collet Chuck ER20 3R-311.2 * Chuck Ø20 mm for collets ER20 with electrodes < Ø13 mm. Adapted for automatic changing Weight 0.2 kg. Clamping force 4000 N Reduces ...
SYSTEM 3R 3R-311.2-00
System 3R Mini Collet Holder Kit, Complete w/12 pcs. ER20 Collet * 12 collets included ranging from 1mm - 13mm These items have been checked out and are in good working condition. Some collets h...
SYSTEM 3R 3R-314.2
System 3R Mini Control Ruler 3R-314.2 * Use to align chucks in the spindle or table with the System 3R Mini system or setting angular positions. Measuring length 96 mm Weight 0.4 kg. C...
SYSTEM 3R 3R-321-EXH
System 3R Table Reference Ball 10mm 3R-321-EXH * 10mm Precision Reference Ball for mounting on machine table * 6 Available
SYSTEM 3R 3R-321-H1
System 3R Mini Dovetail Aromatic Spindle Chuck 3R 3R-321-H1 * Can be used with or without AEC. Equipped with self-clamp finger option. This item has been gone through to make sure it is in good...
SYSTEM 3R 3R-321.2-4X90º-HARIG
System 3R Mini Chuck w/Harig Adapter - 3R-321.2-4x90º-Harig * Chuck w/ Adapter on back side for a Harig Chuck This item has been checked out to make sure it operates properly. * Note 1 of the 4 lo...
SYSTEM 3R 3R-321.46
System 3R Mini (20mm Shank Type) Machining Block * Manual hydraulic chuck for vertical or horizontal mounting on the machine table. Fixed index positions 4x90° Weight 2.3 kg. (5lbs) C...
SYSTEM 3R 3R-322/50
System 3R Mini 20mm Shanks w/CuW (Lot of 23) * Holder with hardened reference part and unhardened electrode mounting part - includes attached electrode material (CuW) Adapted for automatic c...
SYSTEM 3R 3R-392.23
System 3R MacroTwin Straight Holder 3R-392.23 * System 3R Fixed Straight holder to be mounted on MacroTwin chuck. Can be loaded manually or by robot. Holder to mount onto MacroTwin chuck Horizon...
SYSTEM 3R 3R-392.23-CUST
System 3R MacroTwin Straight Holder Custom 3R-392.23-Cust * System 3R Fixed Straight holder to be mounted on MacroTwin chuck. Can be loaded manually or by robot. Holder to mount onto MacroTwin c...
SYSTEM 3R 3R-443AEC A
System 3R Mini to Macro Jr Adapter 3R-443AEC A * For mounting MacroJunior holders in the Mini system. Axial locking screw with channel for flushing through the electrode. Note: For EDM machining...
SYSTEM 3R 3R-460.EX-A
System 3R Macro Combi Spindle Chuck w/Adapter Plate 3R-460.EX-A * Pneumatic chuck for mounting directly on the machine spindle or on the table. All X/Y/Z references in hardened and ground steel. ...
SYSTEM 3R 3R-461-W32/SE
System 3R Macro Jr Flat Spacer For Coins (Set of 25) 3R-461-W32/SE * Flat spacer to be mounted on Jr Coins for structural support and larger electrodes New In Box * Currently 2 Sets in Stock
SYSTEM 3R 3R-463/100 C
System 3R Mini to Macro Jr Adapter 100mm 3R-463/100 C * For mounting MacroJunior coin holders in the Mini system. Axial locking screw with channel for flushing through the electrode. Note: For E...
SYSTEM 3R 3R-466.40RS
System 3R Stainless Macro to Macro Jr Adapter 3R-466.40RS * Stainless Macro to Macro Jr. Chuck - Manual - w/stabilizing ring for milling- rear clamp 40mm high System 3R Adapter made to cross a Ma...
SYSTEM 3R 3R-600.84.30
System 3R 3R-600.84.30 Automatic Macro Spindle Chuck * Pneumatic chuck for mounting directly on the machine spindle. All X/Y/Z references in hardened and ground steel. Note: When ordering state m...
SYSTEM 3R 3R-600.EX8
System 3R Macro Chuck - Automatic - Built-in (Mitsubishi) 3R-600.EX8 * Can be used on an EDM sinker spindle with or without AEC or made into a milling or EDM table chuck if an adapter plate is ma...
SYSTEM 3R 3R-601.7-P
System 3R Macro Economy Holder - 70mm x 70mm (Lot of 2) * Hardened and precision-cast, with clearance holes for four fixing screws. Note: Must be mounted on the workpiece/fixture before it is lo...
SYSTEM 3R 3R-605.10
System 3R Wire EDM Drawbar Macro Stainless 3R-605.10 * Drawbar - Macro Wire EDM - stainless- for 3R-602.10,602.12,602.10HP,602.12HP,602.10-1 Very good used condition - only lightly used * Curre...
SYSTEM 3R 3R-608.31
System 3R 3Refix Unhardened Pallet 70x70mm (Lot of 11) * 3Refix Macro Unhardened Pallets 6) Mild Steel and 5) Aluminum sold in 1 lot 70x70mm with 3Refix holes and 4) M6 threads. Intended to be mo...
SYSTEM 3R 3R-610.21
System 3R Macro Machining Block 5 Ref 3R-610.21 * Table Chuck for use in a mill or grinder, usually for manufacturing electrodes or workpieces Five ground faces for vertical or horizontal mountin...
SYSTEM 3R 3R-651.105E
System 3R Macro Holder w/Unhardened 30mm Flange 3R-651.105E (Set of 8) * Holder 54x54 mm 3R-651.105E Hardened holder with unhardened 30mm diameter electrode mounting part. * Adapted for automati...