ACCURLUSA PROCUT SERIES
2020 AccurlUSA 5' X 10' ProSeries WaterJet. This table is LOADED & equipped with only the most premier components that are available for a machine today. This includes; HIWIN Linear Guide, Panaso...
APW 3020BA
Bought new in 2017. Believe it has under 500 hours, currently not hooked up and can't get that info right now. Was bought and used more for little projects here and there. The intensifier and hydra...
CALYPSO 10’
FULLY REFURBISHED - 10’ X 20’ CNC Abrasive Waterjet Cutting System with Current Calypso PC Based Controller System, NC Geomate/Console Operating System, , 600 LB Bulk Abrasive Hopper.
CMS AQUATEC 3400 + 3400
2017 CMS Waterjet, Dual Table 13' x 22' Cutting Area Immaculate machine with 800 hours, replaces over $550k new.
FLOW 60K INTENSIFIER
Buy it as a spare/back-up. Minimize downtime. Send us your old one to be rebuilt. Email us for info on our rebuild program.
FLOW 712207-1
2006 Flow 712207-1 CNC Waterjet, 4' X 8' Table, 60000 PSI Pump, Flowmaster PC-Based Control, Digital AC Servo Motors, Integrated Flying Bridge
FLOW FLYING
4’ X 8’ Waterjet Cutting System with Flow PC - Based Control on Windows 7.
FLOW I-6012
6' x 12' Flow i-6012, 5-Axis, Dynamic Waterjet Z-Axis, 8"Z, 60K PSI, Pro Software, 2007
FLOW IFB 6012
7′ x 12′ FLOW IFB 6012 Waterjet, 2005 – 58,000 PSI
FLOW IFB 6012
6' x 12' Table, 55,000 psi, 50 HP, 3-Axis, Hopper, Updated Cutting Software
FLOW IFB 6012
6′ x 12′ Flow IFB 6012 CNC Waterjet, 2004 – with upgraded 87,000 psi pump-very clean machine
FLOW M200 4020 PIVOT
2020 FLOW M200 4020 PIVOT PLUS CNC Waterjet. Used. Equipped: 30HP 60K PSI HyPlex Prime Pump, Pivot Point Head, Hopper. 841.3hrs, 6'x13.4' table, 8" Z-axis. Ideal for precise cutting tasks.
FLOW MACH 2 1313B
Flow Mach 2-1313B CNC Waterjet Cutting Machine with 60,000 PSI Intensifier and Flow Paser CF900 Stock: Manufacturer: Flow Model: Mach 2-1313B Age: 2015 CONTROL: FLOWMASTER PC BASED CONTROL TABLE SI...
FLOW MACH 2 2040C
Upgrade your fabrication capabilities with the 2012 FLOW Mach 2 2040C CNC Waterjet. Boasts 60,000 PSI, dynamic head & chiller. American-made, ready for immediate sale in Riverside, CA.
FLOW MACH 3 4020B
Newly refurbished Flow Mach 3 6'x13' Waterjet. New long axis ballscrew, new boards, pump total rebuilt including solenoids and relays, amplifier, whip. Repainted and new stickers.
FLOW MACH2 2031B
FLOW Water Jet Cutter MACH 2 M2 2031B (used) New 12/2017 w/upgrade to 30SA 30HP 60,000 intensifier pump, FlowMaster Software Flow Cut 7, FlowPath 7, ONLY 2,440 HOURS!
FLOW MACH2 2031B
6.6' x 10' CNC Waterjet
FLOW MACH2-3120B
About as clean a Water Jet cutter you will ever find with only 2,440 hours on it.
MAXIEM 2030
Omax Maxiem 2030, 79" x 120" Travel, 60,000 PSI, 40 HP, Koolant Chiller, 600 Lb. Hopper, 2,505 Hours, 2010, #31384
MITSUBISHI EVOLUTION
5’ X 10’ Abrasive Waterjet Cutting System with Mitsubishi CNC Graphical Controller, 50 HP KMT 60K PSI (60,000 PSI) KMT Intensifier Pump, Chiller, Water Filler, Weir Tank (Ebbco), Bladder Tank (Ebbc...
OMAX 160X SERIES
OMAX 160X, 2018, 13.33' x 40', A-Jet Head, 50HP Pump, 60,000 PSI,
OMAX 55100
4’ X 8’ CNC Waterjet with Omax Windows 7 Based Controls, 55,000 PSI, Meyers Pump P3055V, Koolant Kooler HAF 1000.
OMAX 55100
*ONE OWNER SYSTEM* This WJ is in incredible shape for the age, and has always been meticulously cared for and maintained. Pump rebuild was completed less than 15hrs ago, this unit has low hours wit...
OMAX 55100
Omax 55100, 60,000 PSI, 40 HP Enduromax Pump, 126" x 65" Table Size, A Jet Cutting Head, Collision Sensing, 2019, #32675