AMADA WASINO J1
2008 Amada Wasino J1 CNC Lathe, Carousel Loader, Part Flipping Station, Chip Conveyor
BUDERUS 235 MA
Largest workpiece diameter: 150 mm Max. workpiece diameter: 280 mm Largest swing diameter above the table:200 mm Height of the workpiece spindle above the floor: 1250 mm Workpiece spindle speeds NC...
CNC NEW, INC. GT-ISL50
2014 CNC New GT-ISL50 CNC turning center. Machine is in very good condition and can be inspected under power as needed. Machine has a gang style turret.
CNC NEW, INC. GT-ISL50
2016 CNC New GT-ISL50 CNC turning center. Machine is in very good condition and can be inspected under power as needed. Machine has a gang style turret.
COLCHESTER TORNARDO T4
LNS SUper Hydrobar feeder Tooling Vdi 40 system Chip conveyor Collet device with inserts Running hours 4500 H Max. turning Ø:230mm X-Axis: 200mm Z-Axis: 450mm Spindle bore: 61mm Sp...
DOOSAN LYNX 2100LSY
With FANUC i-Series CNC Control, Chip Conveyor, Coolant System, Sub Spindle, LNS Bar feeder & Tool Pre-setter
DOOSAN LYNX 2100LSY
Live Tool, Sub Spindle, Bar Feed, Tool Presetter, Mist-Fit MF-550, 3 Jaw Chuck, Fanuc i Series CNC
EMAG VL 5I
Emag VL5i Single Spindle Live Tool Vertical Turning (2) Machine Cell (2016)
EMAG VSC 250 DDS
EMAG Reinecker VSC-250-DDS, 10.23" Swing, 12-Sta. Turret, Grinding Spindle, Parts Loader, Siemens CNC, #32337
EMAG VSC 250 DDS
EMAG Reinecker VSC-250-DDS, 10.23" Swing, 12-Sta. Turret, Grinding Spindle, Parts Loader, Siemens CNC, #32337
EUROTECH 710SLL
1998 Eurotech Elite 710SLL Quattroflex Multi-Axis CNC Lathe, C-Axis, Live Tooling, High-Pressure Coolant, Coolant Filtration System, Bar Feeder, Programmable Parts Catcher, Boring Bar Holders, Chip...
FUJI CSD-300
10,238 Cut hours (2) Available. The CSD-300 Twin Spindle Lathe features parallel twin two spindle CNC lathes with both Z- and X-axis box way slides for heavy cutting, superior surface finish and l...
HARDINGE CONQUEST GT27
Hardinge Conquest GT27 General Precision CNC Gang Style Lathe with Fanuc 21T CNC Control. with parts catcher Barfeed may be available depending on agreed price. CALL NOW 230 volt - 60 cycle - 3 phase
HARDINGE CONQUEST GT27
Nice low hour Silicon Valley Machine
HARDINGE CONQUEST GT27SP
HARDINGE, CONQUEST GT27SP, CNC, GANG TOOL, LATHE, GE FANUC ,18i, CNC CONTROL, 5C SPINDLE, 230/3/60, 35 KVA, S/N GTL-153-18 WITH LOADER
HARDINGE CONQUEST GT27SP
Hardinge Conquest GT27SP CNC Gang Tool Lathe equipped with Fanuc 18iT CNC Control including parts catcher and air blast. Machine also features C axis on the control. Machine voltage is 230 volt - 6...
HARDINGE CONQUEST GTSP
Hardinge Conquest GT27SP Gang Tool CNC Lathe with Autodoor and chip removal system and air blast Fanuc 18T CNC Control
HARDINGE CS-GT
Explore our Hardinge Conquest GT CNC Lathe! With an 11.76" swing, dual-axis control, 6" chuck, and 1.062" bar capacity. Reliable 5 hp motor, max 6,000 RPM. Features GE Fanuc 18i-T, gang tooling, an...
HARDINGE CS-GT
For sale: Hardinge Conquest GT CNC Lathe, used condition, 2-axis, 11.76" swing, 5 hp, 6,000 RPM. Includes GE Fanuc 18-T Control, chip conveyor, gang tooling cross-slide, and parts catcher. 5,500 cu...
KITAKO HS4200
2013 Kitako HS-4200 with Fanuc OiTD CNC Control and Fanuc Dual Robot Integrated Installed Robotic Part Loaders and All Input-Output Conveyors Systems and Flexible Post Process Gauging Systems and a...
LEADING EDGE INDUSTRIAL HX710
The HX710 Turning Center (TC) is a compact, yet incredibly versatile, totally enclosed, Benchtop CNC lathe, suitable for all skill levels. The small footprint of the HX710 TC allows it to comfortab...
MAZAK QUICK TURN 8N
Mazak QT-8N CNC Lathe, 1994 – Tailstock Ready, Chip Conveyor
MURATEC ML400
Muratec Model ML 400G CNC turning centers . machines are specially equipped with Optional heavy duty A/C spindle motors, tailstocks, single turrets, Gantry loaders, part holders, chip conveyors, to...
MURATEC MW120
Muratec Model MW120 CNC twin spindle CNC Turning centers. Single gantry machines with 8" chucks and tooling. Machines are new in 2005 , no part stackers or loaders as they were gantry fed by overh...
MURATEC MW120
Muratec Model MW120 twin spindle single gantry CNC Turning center w/ stacker loader New 2013 s/n 1480
MURATEC MW120G
2005 Muratec "Murata" MW120G CNC Twin Spindle Turning Center w/Overhead Gantry Loader With Fanuc 18iT CNC Control and All Options for Production Machining. New 2-Operation Under Power Video Links! ...
MURATEC MW200
Muratec Model MW 200 twin spindle turning centers , with chip conveyors and misc tooling, New 2002-2005 , Machines are coming from a production faciliity machining good quality parts. note machines...
MURATEC MW80
2014 Muratec MW-80 GT Twin Spindle with Twin Gantry Loaders Feature Super High-Speed Processing with for high-speed processing of parts up to 80mm ( 3.14") in diameter for Shorter Cycle Times With ...
NAKAMURA-TOME
Nakamura Tome WT300 Fanuc 18iTB CNC, (2) Spindles,(2) Turrets, Live Milling, Bar Feed, CTS, C-Axis,Y-Axis, 2007, #32283
NAKAMURA-TOME SUPER NTM3Y
(1) Nakamura-Tome Super NTM 3 (3 turret, Y axis) CNC Lathe (used) New 2008 w/Fanuc 16iTB control, Collet Chuck For Head One And Head Two, LNS Chip Conveyor, High Pressure Coolant Unit, LNS Quick Si...
NAKAMURA-TOME TMC-15
Nakamura-Tome TMC-15 CNC Lathe, Fanuc Series 18-T Control, 16 Position Turret, Collet Chuck, Parts Catcher, LNS QL Servo Bar Feed