PM-932M-PDF:
Includes: Quill DRO, Z Axis (Head) Positioning Motor, X Axis
Table Feed, Power Down Feed on spindle for drilling and boring

PM-932M MAIN FEATURES:

Heavier Class Milling Machine, (1100 LBS With Base) For More Rigidity, And Greater Cutting Ability
Larger Knee Mill Style Table Handles, for Much Better Control By Hand
True Inch Pitch Leadscrews on X and Y Axis, 10 TPI Screws (.100″ Per Turn) For Easier Operation
Available With Power Down Feed on Spindle (PDF Model Only) For Boring Operations
Optional Stand is Heavy Duty Cast Iron, For Better Vibration Dampening and Rigidity
Longest In Class, 3 Year Warranty

MAIN SPECIFICATIONS:

Table Size: 9″x31.5″
Max. Table Load Capacity: 300 lbs
Spindle Speeds (RPM): 90, 210, 345, 670, 1180, 1970
Table T-Slot Size and Number: 14mm / 9/16″, 3 Slots
Table Travel, X Axis: 22-3/8″ Hand Only, 19.5″ w/ Power Feed
Table Surface Height from floor, 34-3/4″ (With base flat on floor)
Base Dimension at floor approx. 18-5/8″W x 27″D
Bolt Mounting Pattern, Milling Machine Base (Where the machine would bolt to either a work bench or to the cast iron base) Approx. 12-3/4 Wide x 18-3/4 Deep, 9/16” Hole Diameter
Base of machine casting, bottom of the mill where it would mount to the optional base is approx. 24″ Front to back, 16″ Wide
Normal Working Max Height: (top of column travel motor) 76-1/2″ (with optional stand)
Height with head all the way up: (top of main motor) 81-1/2″(with optional stand)
Stand (Base) height, to machine mounting surface: 24″
Cross Travel, Y Axis: 8″
Head Vertical Travel: 17″
Max. Distance Spindle to Table: 18″
Quill (Spindle) Travel: 5″
Lead Screw Type: Inch Pitch Acme Threads
Spindle Taper: R-8, with 7/16-20 drawbar thread (U.S.
Standard)
Quill Diameter: approx. 3″
Head Tilt Front to Back: N/A
Head Swivel: Side To Side, 90 Degrees
Ram Swivel: N/A
Power: 220 Volt, Single Phase, 9 Amps
Motor Horsepower: 1.5 H.P. (Some other similar machines will say
that they are 2HP, but its the SAME exact motor as this one, just rounded
up to 2hp and marked that way, we prefer to be honest and mark it as
what it really is, which is 1.5HP, which is more than enough power for
this machine either way)
Cord Connection/Type: Cord approx. 5′ length, User to supply plug needed for your outlet (20A 240V With Ground, No Neutral Required)
Casting Type: Fine Grain Cast Iron
Country of Origin: China
Approximate Weight: 1100lbs with Stand, 850 Without Stand