新しい受注トリマー (73)
新モデル (73)
1 - 50の73 モデル
thumb

CHERA CIOS-I

Chera manufactures high quality Oil Seal Trimming Machine with auto control where the operator is required to provide & draw out the products so even a fresh worker can operate the machine easily. ...

最大幅:3.937 in
パワー:1.0 hp
1 フォト
thumb

CHERA CIOS-II

Chera manufactures high quality Oil Seal Trimming Machine with auto control where the operator is required to provide & draw out the products so even a fresh worker can operate the machine easily. ...

最大幅:7.087 in
パワー:1.0 hp
1 フォト
thumb

GEISS FZ 1000X600

最大幅:39.37 in
1 フォト
thumb

GEISS FZ 2000X1000

最大幅:78.74 in
1 フォト
thumb

HAVEN 891

1 フォト
thumb

HAVEN 893

1 フォト
thumb

HAVEN 895

1 フォト
thumb

HOLYTEK EB-41

パワー:0.2 hp
1 フォト
thumb

JULIUS BHR/BKB/KOMPAKT

Large cross sections and high productivity impose heavy stresses on the machining of the edges. In this case it is recommended to integrate a strip edge trimming machine of the series BKB/Kompakt i...

最大幅:59.1 in
1 フォト
thumb

JULIUS BHR/DUO

Technical data: strip width max. 1,500 mm (59.1″) strip thickness 0.15–8 mm (0–0.32″) contours: different contours speed: up to 300 m/min (984 ft./min) The strip edge trimming line of the series ...

最大幅:59.1 in
1 フォト
thumb

JULIUS BHR/QUATTRO

The strip edge trimming line of the series BHR/QUATTRO is designed for strip edging of complex contours and chamfers also at wide and/or soft material. The line consists essentially of a decoiler, ...

最大幅:59.1 in
1 フォト
thumb

JULIUS BHR/QUINTO

The strip edge trimming line of the series BHR/QUINTO is the biggest strip edging line of the modular series. It achieves all contours and chamfers required even at wide and/or soft material. The l...

最大幅:59.1 in
1 フォト
thumb

JULIUS BHR/TRIO

The strip edge trimming line of the series BHR/TRIO is designed for strip edging of a big range of contours and chamfers. The line consists essentially of a decoiler, a recoiler and a strip edge tr...

最大幅:59.1 in
1 フォト
thumb

JULIUS BKB/KOMPAKT

The strip edge trimming machines of the series BKB-KPT reveal a compact type of construction. The machines work with 6 tools each side. Due to a sophisticated system of tool arrangement, complex co...

最大幅:9.84 in
1 フォト
thumb

JULIUS DUO 1000

The DUO is a strip edge trimming machine of middle size working with 6 tools and 6 rolls. It treats the edges by metal-cutting - roll against tool. Depending on the strip thickness and the strip ma...

最大幅:39.37 in
1 フォト
thumb

JULIUS DUO 150

The DUO is a strip edge trimming machine of middle size working with 6 tools and 6 rolls. It treats the edges by metal-cutting - roll against tool. Depending on the strip thickness and the strip ma...

最大幅:5.906 in
1 フォト
thumb

JULIUS DUO 300

The DUO is a strip edge trimming machine of middle size working with 6 tools and 6 rolls. It treats the edges by metal-cutting - roll against tool. Depending on the strip thickness and the strip ma...

最大幅:11.81 in
1 フォト
thumb

JULIUS DUO 400

The DUO is a strip edge trimming machine of middle size working with 6 tools and 6 rolls. It treats the edges by metal-cutting - roll against tool. Depending on the strip thickness and the strip ma...

最大幅:15.75 in
1 フォト
thumb

JULIUS DUO 500

The DUO is a strip edge trimming machine of middle size working with 6 tools and 6 rolls. It treats the edges by metal-cutting - roll against tool. Depending on the strip thickness and the strip ma...

最大幅:19.69 in
1 フォト
thumb

JULIUS DUO 600

The DUO is a strip edge trimming machine of middle size working with 6 tools and 6 rolls. It treats the edges by metal-cutting - roll against tool. Depending on the strip thickness and the strip ma...

最大幅:23.62 in
1 フォト
thumb

JULIUS DUO 700

The DUO is a strip edge trimming machine of middle size working with 6 tools and 6 rolls. It treats the edges by metal-cutting - roll against tool. Depending on the strip thickness and the strip ma...

最大幅:27.56 in
1 フォト
thumb

JULIUS DUO 80

The DUO is a strip edge trimming machine of middle size working with 6 tools and 6 rolls. It treats the edges by metal-cutting - roll against tool. Depending on the strip thickness and the strip ma...

最大幅:3.15 in
1 フォト
thumb

JULIUS DUO 800

The DUO is a strip edge trimming machine of middle size working with 6 tools and 6 rolls. It treats the edges by metal-cutting - roll against tool. Depending on the strip thickness and the strip ma...

最大幅:31.5 in
1 フォト
thumb

JULIUS DUO 900

The DUO is a strip edge trimming machine of middle size working with 6 tools and 6 rolls. It treats the edges by metal-cutting - roll against tool. Depending on the strip thickness and the strip ma...

最大幅:35.43 in
1 フォト
thumb

JULIUS QUATTRO 1000

The QUATTRO machine ranks among the big modular strip edge trimming machines - working with 12 tools and 12 rolls. It treats the edges by metal-cutting - roll against tool. Depending on the strip ...

最大幅:39.37 in
1 フォト
thumb

JULIUS QUATTRO 150

The QUATTRO machine ranks among the big modular strip edge trimming machines - working with 12 tools and 12 rolls. It treats the edges by metal-cutting - roll against tool. Depending on the strip ...

最大幅:5.906 in
1 フォト
thumb

JULIUS QUATTRO 300

The QUATTRO machine ranks among the big modular strip edge trimming machines - working with 12 tools and 12 rolls. It treats the edges by metal-cutting - roll against tool. Depending on the strip ...

最大幅:11.81 in
1 フォト
thumb

JULIUS QUATTRO 400

The QUATTRO machine ranks among the big modular strip edge trimming machines - working with 12 tools and 12 rolls. It treats the edges by metal-cutting - roll against tool. Depending on the strip ...

最大幅:15.75 in
1 フォト
thumb

JULIUS QUATTRO 500

The QUATTRO machine ranks among the big modular strip edge trimming machines - working with 12 tools and 12 rolls. It treats the edges by metal-cutting - roll against tool. Depending on the strip ...

最大幅:19.69 in
1 フォト
thumb

JULIUS QUATTRO 600

The QUATTRO machine ranks among the big modular strip edge trimming machines - working with 12 tools and 12 rolls. It treats the edges by metal-cutting - roll against tool. Depending on the strip ...

最大幅:23.62 in
1 フォト
thumb

JULIUS QUATTRO 700

The QUATTRO machine ranks among the big modular strip edge trimming machines - working with 12 tools and 12 rolls. It treats the edges by metal-cutting - roll against tool. Depending on the strip ...

最大幅:27.56 in
1 フォト
thumb

JULIUS QUATTRO 80

The QUATTRO machine ranks among the big modular strip edge trimming machines - working with 12 tools and 12 rolls. It treats the edges by metal-cutting - roll against tool. Depending on the strip ...

最大幅:3.15 in
1 フォト
thumb

JULIUS QUATTRO 800

The QUATTRO machine ranks among the big modular strip edge trimming machines - working with 12 tools and 12 rolls. It treats the edges by metal-cutting - roll against tool. Depending on the strip ...

最大幅:31.5 in
1 フォト
thumb

JULIUS QUATTRO 900

The QUATTRO machine ranks among the big modular strip edge trimming machines - working with 12 tools and 12 rolls. It treats the edges by metal-cutting - roll against tool. Depending on the strip ...

最大幅:35.43 in
1 フォト
thumb

JULIUS QUINTO 1000

Working with 15 tools and 15 rolls the QUINTO ranks among the biggest modular strip edge trimming machines. It treats the edges by metal-cutting - roll against tool. Depending on the strip thicknes...

最大幅:39.37 in
1 フォト
thumb

JULIUS QUINTO 150

Working with 15 tools and 15 rolls the QUINTO ranks among the biggest modular strip edge trimming machines. It treats the edges by metal-cutting - roll against tool. Depending on the strip thicknes...

最大幅:5.906 in
1 フォト
thumb

JULIUS QUINTO 300

Working with 15 tools and 15 rolls the QUINTO ranks among the biggest modular strip edge trimming machines. It treats the edges by metal-cutting - roll against tool. Depending on the strip thicknes...

最大幅:11.81 in
1 フォト
thumb

JULIUS QUINTO 400

Working with 15 tools and 15 rolls the QUINTO ranks among the biggest modular strip edge trimming machines. It treats the edges by metal-cutting - roll against tool. Depending on the strip thicknes...

最大幅:15.75 in
1 フォト
thumb

JULIUS QUINTO 500

Working with 15 tools and 15 rolls the QUINTO ranks among the biggest modular strip edge trimming machines. It treats the edges by metal-cutting - roll against tool. Depending on the strip thicknes...

最大幅:19.69 in
1 フォト
thumb

JULIUS QUINTO 600

Working with 15 tools and 15 rolls the QUINTO ranks among the biggest modular strip edge trimming machines. It treats the edges by metal-cutting - roll against tool. Depending on the strip thicknes...

最大幅:23.62 in
1 フォト
thumb

JULIUS QUINTO 700

Working with 15 tools and 15 rolls the QUINTO ranks among the biggest modular strip edge trimming machines. It treats the edges by metal-cutting - roll against tool. Depending on the strip thicknes...

最大幅:27.56 in
1 フォト
thumb

JULIUS QUINTO 80

Working with 15 tools and 15 rolls the QUINTO ranks among the biggest modular strip edge trimming machines. It treats the edges by metal-cutting - roll against tool. Depending on the strip thicknes...

最大幅:3.15 in
1 フォト
thumb

JULIUS QUINTO 800

Working with 15 tools and 15 rolls the QUINTO ranks among the biggest modular strip edge trimming machines. It treats the edges by metal-cutting - roll against tool. Depending on the strip thicknes...

最大幅:31.5 in
1 フォト
thumb

JULIUS QUINTO 900

Working with 15 tools and 15 rolls the QUINTO ranks among the biggest modular strip edge trimming machines. It treats the edges by metal-cutting - roll against tool. Depending on the strip thicknes...

1 フォト
thumb

JULIUS TRIO 1000

The TRIO is a strip edge trimming machine of middle size working with 9 tools and 9 rolls. It treats the edges by metal-cutting - tool against roll. Depending on the strip thickness and the strip m...

最大幅:39.37 in
1 フォト
thumb

JULIUS TRIO 150

The TRIO is a strip edge trimming machine of middle size working with 9 tools and 9 rolls. It treats the edges by metal-cutting - tool against roll. Depending on the strip thickness and the strip m...

最大幅:5.906 in
1 フォト
thumb

JULIUS TRIO 300

The TRIO is a strip edge trimming machine of middle size working with 9 tools and 9 rolls. It treats the edges by metal-cutting - tool against roll. Depending on the strip thickness and the strip m...

最大幅:11.81 in
1 フォト
thumb

JULIUS TRIO 400

The TRIO is a strip edge trimming machine of middle size working with 9 tools and 9 rolls. It treats the edges by metal-cutting - tool against roll. Depending on the strip thickness and the strip m...

最大幅:15.75 in
1 フォト
thumb

JULIUS TRIO 500

The TRIO is a strip edge trimming machine of middle size working with 9 tools and 9 rolls. It treats the edges by metal-cutting - tool against roll. Depending on the strip thickness and the strip m...

最大幅:19.69 in
1 フォト
thumb

JULIUS TRIO 600

The TRIO is a strip edge trimming machine of middle size working with 9 tools and 9 rolls. It treats the edges by metal-cutting - tool against roll. Depending on the strip thickness and the strip m...

最大幅:23.62 in
1 フォト