新しい受注ワイヤーEDM (11)
新モデル (11)
接触KENT USA
展示11 モデル
thumb

KENT USA WFI-30

Wire-Cut EDMs can cut plates as thick as 300 mm and are ideal for creating punches, tools and dies from exotic hard metals that are difficult to machine with conventional methods. They can machine...

X:15.7 in
Y:7.87 in
Z:11.8 in
1 フォト
Brochure
thumb

KENT USA WFI-50

Wire-Cut EDMs can cut plates as thick as 300 mm and are ideal for creating punches, tools and dies from exotic hard metals that are difficult to machine with conventional methods. They can machine...

X:19.7 in
Y:11.8 in
Z:11.8 in
1 フォト
Brochure
thumb

KENT USA WFI-60

Wire-Cut EDMs can cut plates as thick as 300 mm and are ideal for creating punches, tools and dies from exotic hard metals that are difficult to machine with conventional methods. They can machine...

X:23.6 in
Y:17.7 in
Z:13.8 in
1 フォト
Brochure
thumb

KENT USA WFI-70

Wire-Cut EDMs can cut plates as thick as 300 mm and are ideal for creating punches, tools and dies from exotic hard metals that are difficult to machine with conventional methods. They can machine...

X:29.5 in
Y:19.7 in
Z:11.8 in
1 フォト
Brochure
thumb

KENT USA WFI-90

Wire-Cut EDMs can cut plates as thick as 300 mm and are ideal for creating punches, tools and dies from exotic hard metals that are difficult to machine with conventional methods. They can machine...

X:35.0 in
Y:19.7 in
Z:11.8 in
2 フォト
Brochure
thumb

KENT USA WSI-1160H

H-Type Moving Column Series features magnet power clutch wire receiving systems, an ATW auto threading wire system, permanent generator control system for wire tension stability and accurate linear...

X:43.3 in
Y:25.6 in
Z:11.8 in
1 フォト
Brochure
thumb

KENT USA WSI-200

Wire-Cut Submerge Type EDMs are excellent at maintaining stable part and lower arm, fixture and worktable temperatures and thus resulting in straighter, more accurate cuts. These EDMs are the way ...

X:8.27 in
Y:7.87 in
Z:4.7 in
1 フォト
Brochure
thumb

KENT USA WSI-430

Wire-Cut Submerge Type EDMs are excellent at maintaining stable part and lower arm, fixture and worktable temperatures and thus resulting in straighter, more accurate cuts. These EDMs are the way ...

X:15.7 in
Y:11.8 in
Z:11.8 in
2 フォト
Brochure
thumb

KENT USA WSI-530

Wire-Cut Submerge Type EDMs are excellent at maintaining stable part and lower arm, fixture and worktable temperatures and thus resulting in straighter, more accurate cuts. These EDMs are the way ...

X:19.7 in
Y:11.8 in
Z:11.8 in
2 フォト
Brochure
thumb

KENT USA WSI-640

Wire-Cut Submerge Type EDMs are excellent at maintaining stable part and lower arm, fixture and worktable temperatures and thus resulting in straighter, more accurate cuts. These EDMs are the way ...

X:23.6 in
Y:17.7 in
Z:13.7 in
1 フォト
Brochure
thumb

KENT USA WSI-860H

H-Type Moving Column Series features magnet power clutch wire receiving systems, an ATW auto threading wire system, permanent generator control system for wire tension stability and accurate linear...

X:31.5 in
Y:23.6 in
Z:11.8 in
1 フォト