신품 (10)
더 이상 제조되지 않는 모델 (2)CORSTEEL 접촉하기
10 모델 게시
thumb

CORSTEEL 1000T BONDING

The CORSTEEL CLUTCH BONDING PRESSES are designed to heat cure and bond the paper material to the clutch plates.

톤수:1000.0 T
스트로크:15.0 in
1 사진
thumb

CORSTEEL 150T PERFORMER

This 150-Ton Preformer is a four-post down-acting press designed specifically to pre-shape loose material into an accurate weight with an easily handled "preform" creating less dust and material se...

톤수:150.0 T
스트로크:17.0 in
데이라이트:37.0 in
1 사진
thumb

CORSTEEL 200T

This 200-Ton press is a four-post down-acting press designed specifically for the stamping industry. This system is also designed to work automatically without supervision with the exception of an...

톤수:200.0 T
1 사진
thumb

CORSTEEL 400T CURE

These presses are designed to cure brake pads.

톤수:400.0 T
1 사진
thumb

CORSTEEL 500T BONDING

The CORSTEEL CLUTCH BONDING PRESSES are designed to heat cure and bond the paper material to the clutch plates.

톤수:150.0 T
스트로크:15.0 in
1 사진
thumb

CORSTEEL 600T CURE

The 600-TON CURE PRESS is designed to reduce the labor associated with the handling of brake production molds.

톤수:600.0 T
데이라이트:15.0 in
1 사진
thumb

CORSTEEL 75T DUAL PERFORMER

This 75 Ton Dual Layer Preformer is a four-post down-acting press designed specifically to pre-shape loose material (friction and backing) into an accurate weight and easily handled "preform" creat...

톤수:75.0 T
스트로크:4.0 in
1 사진
thumb

CORSTEEL 75T INVERTED DUAL

This 75 Ton Inverted Dual Layer Preformer is a four-post up-acting press designed specifically to preform loose material (friction and backing) into an accurate weight and easily handled "preform" ...

톤수:75.0 T
스트로크:4.0 in
데이라이트:18.75 in
1 사진
thumb

CORSTEEL 75T PERFORMER

This 75 Ton Preformer is a four-post down-acting press designed specifically to pre-shape loose material into an accurate weight/easily handled "preform" creating less dust and material separation ...

톤수:75.0 T
스트로크:12.0 in
데이라이트:24.0 in
1 사진
thumb

CORSTEEL 900T CURE

The 900 TON CURE PRESS is designed to reduce the labor associated with the handling of brake production molds.

톤수:900.0 T
1 사진