The Dietert Speed Oven No. 295-B dries laboratory samples in a fraction of the time required in ordinary ovens. The unit is ideal for slurries, pastes, and suspensions, as infrared heat is applied...
오븐
DIETERT 3550
NO. 3550 Ammoniacal Nitrogen Tester
Determines ammoniacal nitrogen in molding materials and system sands. Recent evidence has identified nitrogen in the form of ammonia as a primary source of rea...
테스터, 기타
1 사진
DIETERT 365
테스터, 인장 및 압축
DIETERT 405
테스터, 기타
DIETERT 473
테스터, 인장 및 압축
DIETERT 474
테스터, 인장 및 압축
DIETERT 508
This furnace is ideal for running Loss on Ignition (LOI) and volatiles tests. It is used to control the amount of sea coal, pitch, asphaltic and other facing materials added to sand. The furnace ca...
로, 박스 타입
1 사진
DIETERT 624-A
The cone jolt toughness test is a dynamic test rather than a static one (such as for compression or shear measurement). A molding sand specimen is subjected to repetitive stressing with relatively ...
테스터, 기타
1 사진
DIETERT 674
테스터, 경도
DIETERT 682
NO. 682 Gas Pressure Tester
This is an important instrument for studying and measuring the volume and rate of gas evolution from cores, pastes, washes, molding sands, and other foundry materials.
...
테스터, 기타
1 사진
DIETERT 780
NO. 780 Wet Tensile Tester (Type PNZ-A)
The Wet Tensile Test is widely used wherever activated calcium bentonites are in common use, as a guide to the degree of activation of the bond.
The test i...
전자현미경
1 사진
DIETERT 812
전자현미경
DIETERT 875
NO. 875 Friability And Moldability Tester
The friability test measures the ability of a compacted molding sand to resist abrasion or scuffing in the first few millimeters at the surface of the mo...
