The Angle-Max 1.6 machine is used to produce angle stock for flat oval and round flanges.
Producing 90° angles from coil stock, the Angle Max also automatically cuts to a desired length, and featu...
1 사진
ISM LOCKFORMER ANGLE-MAX 1.6-13
Up to 16 gauge
1 사진
ISM LOCKFORMER OVAL-MAX ROLLER 4
The Oval-Max Roller 4 is used to produce round and oval fittings on material up to 20 gauge and up to 40" wide. This machine’s control panel allows for easy operator entry of part parameters.
1 사진
ISM LOCKFORMER ROLLER-MAX 800
The Roller Max 800 is an automatic rollformer designed to support high-speed production of round metal parts. The Roller Max 800 produces parts with diameters ranging from 3"-40" and up to 20 gauge...
1 사진
ISM LOCKFORMER ROUND/OVAL PIPE 7STA
Uses approximately 1-9/16" material for both sides. 24-30 gauge capacity. The 14, 16 and 18 gauge Pittsburgh rollforming machines have 7 forming stations with two forming positions. One inboard pos...
1 사진
ISM LOCKFORMER ROUND/OVAL PIPE 9STA
Pre-curl 24–30 gauge, Uses approximately 1-9/16" material for both sides. The 14, 16 and 18 gauge Pittsburgh rollforming machines have 7 formingstations with two forming positions. One inboard posi...
1 사진
ISM LOCKFORMER SPIN COLLAR MAKER
Make your own spin collars in minutes. Just cut galvanized stock (24 gauge & lighter) to width and length, set the diameter from 4" to 16", and push the blank against the automatic stop. A synchron...