LAPMASTER 12
The Lapmaster Model 12 is a bench mounted unit with a rigid, lightweight, cast aluminum base. The machine is of the “ring lapper” configuration, enabling high standards of flatness and surface fini...
LAPMASTER 1200 G
Lapmaster International presents a full line of single side fine grinding systems with fine grinding wheel sizes ranging from 500 mm diameter to 1200 mm diameter. Fine grinding produces flat parts ...
LAPMASTER 1410
These systems (4 standard models are available) are enabled to remove oils, waxes or slurry off most surfaces, leaving no residue, damage, scratches or corrosion. Lapmaster also offers a complete l...
LAPMASTER 15
The Lapmaster Model 15 is a bench-mounted unit with a rigid, lightweight, cast aluminum base. The machine is of the “ring lapper” configuration, enabling high standards of flatness and surface fini...
LAPMASTER 1610
These systems (4 standard models are available) are enabled to remove oils, waxes or slurry off most surfaces, leaving no residue, damage, scratches or corrosion. Lapmaster also offers a complete l...
LAPMASTER 1910
These systems (4 standard models are available) are enabled to remove oils, waxes or slurry off most surfaces, leaving no residue, damage, scratches or corrosion. Lapmaster also offers a complete l...
LAPMASTER 20/OF
The Lapmaster Model 20 is a bench-mounted unit with a heavy duty carbon steel weldment base. The machine is of the “ring lapper” or “planetar y-lapper” configuration, enabling high standards of fl...
LAPMASTER 20/PL
The Lapmaster model 20 (pneumatic lift) is a bench-mounted unit with a heavy duty, carbon steel weldment base. The machine is of the “ring lapper” or “planetary lapper” configuration, enabling high...
LAPMASTER 2013
These systems (4 standard models are available) are enabled to remove oils, waxes or slurry off most surfaces, leaving no residue, damage, scratches or corrosion. Lapmaster also offers a complete l...
LAPMASTER 24/OF
The Model 24 diamond flat lapping/polishing machine is a popular choice for lapping of mechanical seal faces and a variety of valve components, eg: pressure relief valve bodies and caps, and parall...
LAPMASTER 24/PL
The pneumatic lift version of the Model 24 is based on the open face machine, but has the pressure weights attached to the rods of three pneumatic cylinders. Selfaligning bearings accommodate any s...
LAPMASTER 36
The pneumatic lift version of the Lapmaster Model 36 is based on the Open Face design, but the pressure weights are attached, through selfaligning bearings, to the rods of three pneumatic cylinders...
LAPMASTER 36AB
This machine is designed primarily for the production of high quality plano-optics, such as proof flats, etalons, prisms, filters, windows and ring laser gyroscope blanks.
LAPMASTER 48
The Lapmaster Model 48 machine features rugged construction, and is equipped with a 48 inch (1219 mm) diameter cast iron lap plate.
LAPMASTER 48AB
The Lapmaster 48 air bearing optical polishing machine is designed for production of large area high quality plano optics, or where high outputs are required.
LAPMASTER 500 G
Lapmaster International presents a full line of single side fine grinding systems with fine grinding wheel sizes ranging from 500 mm diameter to 1200 mm diameter. Fine grinding produces flat parts ...
LAPMASTER 56
The Lapmaster Model 56 machine is an uprated version of the Model 48, with a larger diameter lap plate and support plate and correspondingly larger conditioning rings.
LAPMASTER 72
The Model 72 machine is, as with all the other machines in the series, of the ring lapping type, but its design is different because of its larger size.
LAPMASTER 84
The Lapmaster Model 84 machine for standard duty applications is equipped with four work stations. The machine includes a fabricated base assembly with segment support plate, splash trough and fou...
LAPMASTER 850 G
Lapmaster International presents a full line of single side fine grinding systems with fine grinding wheel sizes ranging from 500 mm diameter to 1200 mm diameter. Fine grinding produces flat parts ...
LAPMASTER CARLAP 12000
The mid-range series of machine is designed to Lap and Polish components on a 3/4/8 carrier format respectively (114/180/310 mm Max component size respectively.)
LAPMASTER CARLAP 2000
The small 2000 series machines are designed to Lap and Polish components on a 5 carrier format (40 mm Max component size)
LAPMASTER CARLAP 24000
The large 24000 Carlap line of dual face lapping/polishing machines is based upon a 3 way planetar y concept designed to yield precise and repeatable result at an economical price.
LAPMASTER CARLAP 5000
The mid-range series of machine is designed to Lap and Polish components on a 3/4/8 carrier format respectively (114/180/310 mm Max component size respectively.)
LAPMASTER CARLAP 8000
The mid-range series of machine is designed to Lap and Polish components on a 3/4/8 carrier format respectively (114/180/310 mm Max component size respectively.)
LAPMASTER DFL 1000
The Lapmaster DFL line of dual face lapping/polishing/fine grinding machines is based upon a 3-way planetary concept designed to yield precise and repeatable results at an economical price. Excelle...
LAPMASTER DFL 400
The Lapmaster DFL line of dual face lapping/polishing/fine grinding machines is based upon a 3-way planetary concept designed to yield precise and repeatable results at an economical price. Excelle...
LAPMASTER DFL 700
The Lapmaster DFL line of dual face lapping/polishing/fine grinding machines is based upon a 3-way planetary concept designed to yield precise and repeatable results at an economical price. Excelle...
LAPMASTER DFO 700
The Lapmaster DFO700 is a 5-way infinitely variably stroked oscillating optical polishing/lapping machine with a sophisticated control system. It can execute complex polishing/ lapping routines whi...
LAPMASTER DSG 720
The Lapmaster DSG dual-face fine grinding machine utilizes a 3-way planetary system to generate precise and repeatable results at an economical price. Excellent results are obtained processing a wi...
LAPMASTER LLCD-1000
To complement our extensive range of Single and dual face lapping and polishing machines Lapmaster has introduced a new line of precision oscillating head polishing machines.
LAPMASTER LLCD-600
To complement our extensive range of Single and dual face lapping and polishing machines Lapmaster has introduced a new line of precision oscillating head polishing machines.
LAPMASTER LLCD-700
To complement our extensive range of Single and dual face lapping and polishing machines Lapmaster has introduced a new line of precision oscillating head polishing machines.
LAPMASTER LLCD-800
To complement our extensive range of Single and dual face lapping and polishing machines Lapmaster has introduced a new line of precision oscillating head polishing machines.
LAPMASTER LLCD-900
To complement our extensive range of Single and dual face lapping and polishing machines Lapmaster has introduced a new line of precision oscillating head polishing machines.
LAPMASTER LSP-12
The Lapmaster Model LSP 12 is a 3-way, planetary, dual face lapping and polishing machine with a sophisticated control system. It can execute complex lapping and polishing routines while producing ...
LAPMASTER LSP-16
The Lapmaster Model LSP 16 is a 3-way, planetary, dual face lapping and polishing machine with a sophisticated control system. It can execute complex lapping and polishing routines while producing ...
LAPMASTER LSP-20
The Lapmaster Model LSP-20 is a 4-way, planetary, dual face lapping and polishing machine with a sophisticated control system. It can execute complex lapping and polishing routines while producing ...
LAPMASTER LSP-30
The Lapmaster Model LSP 30 is a 3-way, planetary, dual face lapping and polishing machine with a sophisticated control system. It can execute complex lapping and polishing routines while producing ...
LAPMASTER LSP-6
The Lapmaster model LSP-6 is a 4-way, planetary, dual face lapping and polishing machine with a sophisticated control system. It can execute complex lapping and polishing routines while producing p...
LAPMASTER LSP-9
The Lapmaster model LSP-9 is a 4-way, planetary, dual face lapping machine with a sophisticated control system. It can execute complex lapping and polishing routines while producing precise and rep...