MANCHESTER TOOL & DIE 24014
Manchester Tool & Die, Inc. model 24014 High Pressure/High Thrust Groover for rolling or cutting operations with quick and easy tool changes and easy access to tooling. The 24014 features 5 second ...
MANCHESTER TOOL & DIE 24020
The Manchester servo roll forming machine features no hydraulics utilizing a servo driven ball screw unit that can be tooled for either rolling or cutting operations. The clamping system is an air ...
MANCHESTER TOOL & DIE M10-3-R
Manchester's M10-3-R is a hydraulically operated end forming/roll forming machine using standard MTD components with the same tooling as the M71-H-3 and 24008 machines. The machine offers intuitive...
MANCHESTER TOOL & DIE M71-E-3
The M71-E-3 & M71-E-6 Electric Tube End Forming Machines accept tubes up to 1-1/2" in diameter. The M71-E-6 has a servo driven, six position rotary shuttle and the M71-E-3 has a pneumatically drive...
MANCHESTER TOOL & DIE M71-E-6
The M71-E-3 & M71-E-6 Electric Tube End Forming Machines accept tubes up to 1-1/2" in diameter. The M71-E-6 has a servo driven, six position rotary shuttle and the M71-E-3 has a pneumatically drive...
MANCHESTER TOOL & DIE M71-H-3
MANCHESTER TOOL & DIE M71-H-6
The Manchester model M71-H-6 is a hydraulically operated machine that uses a programmable six position rotary tool holder. The machine is easily programmed to make one through six strokes and a sim...
MANCHESTER TOOL & DIE M72-H-3
The Manchester model M72-H-3 and M72-H-4 are hydraulically operated machines with a vertical tool holder that is easily programmed to make one, two, three or four strokes. Some of the many features...
MANCHESTER TOOL & DIE M72-H-4
The Manchester model M72-H-3 and M72-H-4 are hydraulically operated machines with a vertical tool holder that is easily programmed to make one, two, three or four strokes. Some of the many features...
MANCHESTER TOOL & DIE M78-H-3
The Manchester model M78-H-3 is a hydraulically operated machine that uses a programmable three position rotary tool holder that is easily programmed to make one through three strokes. A simple adj...
MANCHESTER TOOL & DIE M82-H-3
The Manchester model M82-H-3, M82-H-4 and M-82-H-6 are hydraulically operated machines that use a programmable three, four or six position rotary tool holder that is easily programmed to make 1-3, ...
MANCHESTER TOOL & DIE M82-H-4
The Manchester model M82-H-3, M82-H-4 and M-82-H-6 are hydraulically operated machines that use a programmable three, four or six position rotary tool holder that is easily programmed to make 1-3, ...
MANCHESTER TOOL & DIE M82-H-6
The Manchester model M82-H-3, M82-H-4 and M-82-H-6 are hydraulically operated machines that use a programmable three, four or six position rotary tool holder that is easily programmed to make 1-3, ...
MANCHESTER TOOL & DIE M82-H-6-D
The Manchester model M82-H-3, M82-H-4 and M-82-H-6 are hydraulically operated machines that use a programmable three, four or six position rotary tool holder that is easily programmed to make 1-3, ...
MANCHESTER TOOL & DIE M94-H-6-G
The Manchester model M94-H-6-G is a hydraulically operated combination tube end forming and grooving machine. The machine includes a single stationary clamp for holding the tube, as well as a trans...
MANCHESTER TOOL & DIE M96-H-1
The Manchester model M96-H-1 is a hydraulic operated one stroke machine. The machine was designed as an economical way to perform lockbead operations that require one stroke, but may be used for ma...