BAVIUS HBZ AEROCELL
OKK HA400
OKK HM-X6000
OKK HM1000S
New concepts in high-speed machining offer drastic improvements in speed, rigidity and durability over competing machines. Our HM series offers the fastest and most powerful machines in their class...
OKK HM1250S
New concepts in high-speed machining offer drastic improvements in speed, rigidity and durability over competing machines. Our HM series offers the fastest and most powerful machines in their class...
OKK HM1600
The HM1600 Horizontal Machining Center is the Large Parts Expert with the largest work piece capacity in its class. Machine wind turbine gear hubs, large valves and pipeline parts, engine blocks an...
OKK HM500S/40
New concepts in high-speed machining offer drastic improvements in speed, rigidity and durability over competing machines. Our HM Series offers the fastest and most powerful machines in their class...
OKK HM500S/50
The HM500/50 incorporates the long-awaited 50 taper spindle. This enables heavy-duty cutting for small parts as well as hard-to-cut materials. Our HM Series offers drastic improvements in speed, ri...
OKK HM600
New concepts in high-speed machining offer drastic improvements in speed, rigidity and durability over competing machines. Our HM series offers the fastest and most powerful machines in their class...
OKK HM6300S
Our best-selling HM600 Horizontal Machining Center has been re-invented to reach a new level of speed and productivity. This all-new horizontal machining center supports face mills up to 260mm and ...
OKK HM800S
New concepts in high-speed machining offer drastic improvements in speed, rigidity and durability over competing machines. Our HM series offers the fastest and most powerful machines in their class...
OKK HMC400
Built for extreme speed, the HMC400 comes fully loaded with features for incredibly fast cycle times. Achieving 20% faster rapid and acceleration than our phenomenally fast HM500S machine, the HMC4...
OKK HMC500
Like our HMC400 Horizontal Machining Center, the HMC500 comes fully loaded with features for incredibly fast cycle times. Achieving 20% faster rapid and acceleration than our phenomenally fast HM50...
OKK MCH10000
The new MCH10000 boxway horizontal machining center for super heavy-duty cutting inherits the features of OKK's MCH series which have been proven over the years. A 3-step gear spindle develops 1,82...
OKK MCH600
Designed For Ultra Heavy-Duty Cutting - With its wide range of rated output, the spindle meets a variety of cutting requirements as well as provides ultra heavy-duty cutting. The whole machine is a...
OKK MCH8000
Heaviest cutting capacity in the world! New MCH8000 box way machining center for super heavy-duty cutting inherits the features of OKK's MCH series which have been proven over the years. A 3 step g...
SW BA 222
Machining small workpieces with two spindles The two-spindle BA 222 machining center with working area dimensions of 200 x 350 x 300 mm per spindle is setting new standards for 4 and 5-axis machin...
SW BA 311
With the new BA 3 series, development continues. Monobloc design is combined with a 3-axis unit, a double swivel table, and 2 or 4 horizontal spindles with a spindle distance of 300 and 150 mm resp...
SW BA 312
With the new BA 3 series, development continues. Monobloc design is combined with a 3-axis unit, a double swivel table, and 2 or 4 horizontal spindles with a spindle distance of 300 and 150 mm resp...
SW BA 321
With the new BA 3 series, development continues. Monobloc design is combined with a 3-axis unit, a double swivel table, and 2 or 4 horizontal spindles with a spindle distance of 300 and 150 mm resp...
SW BA 322
With the new BA 3 series, development continues. Monobloc design is combined with a 3-axis unit, a double swivel table, and 2 or 4 horizontal spindles with a spindle distance of 300 and 150 mm resp...
SW BA 341
With the new BA 3 series, development continues. Monobloc design is combined with a 3-axis unit, a double swivel table, and 2 or 4 horizontal spindles with a spindle distance of 300 and 150 mm resp...
SW BA 342
With the new BA 3 series, development continues. Monobloc design is combined with a 3-axis unit, a double swivel table, and 2 or 4 horizontal spindles with a spindle distance of 300 and 150 mm resp...
SW BA 422
Taking what is great and making it even better is a never-ending pursuit, even when concerned about eclipsing the already proven and successful. The BA 400 set a trend that is continued by the BA 4...
SW BA 422 BLOCK
Taking what is great and making it even better is a never-ending pursuit, even when concerned about eclipsing the already proven and successful. The BA 400 set a trend that is continued by the BA 4...
SW BA 442
Taking what is great and making it even better is a never-ending pursuit, even when concerned about eclipsing the already proven and successful. The BA 400 set a trend that is continued by the BA 4...
SW BA 622
The BA 622 opens up new dimensions in produc- tivity for OEMs in highly dynamic 4- and 5-axis machining of steel and cast components in the 600 mm range. Compared to the previous series BA 600, als...
SW BA 622 BLOCK
The BA 622 opens up new dimensions in produc- tivity for OEMs in highly dynamic 4- and 5-axis machining of steel and cast components in the 600 mm range. Compared to the previous series BA 600, als...
SW BA 642
The BA 6 opens up new dimensions in produc- tivity for OEMs in highly dynamic 4- and 5-axis machining of steel and cast components in the 600 mm range. Compared to the previous series BA 600, the n...
SW BA 722
Bigger, stronger, faster, and more energy efficient – these were the main targets we set during the development of the new 7 series. Bigger in terms of spindle distance (700 mm) and work area; stro...
SW BA 722 BLOCK
Bigger, stronger, faster, and more energy efficient – these were the main targets we set during the development of the new 7 series. Bigger in terms of spindle distance (700 mm) and work area; stro...
SW BA 732
Bigger, stronger, faster, and more energy efficient – these were the main targets we set during the development of the new 7 series. Bigger in terms of spindle distance (700 mm) and work area; stro...
SW BA 742
Bigger, stronger, faster, and more energy efficient – these were the main targets we set during the development of the new 7 series. Bigger in terms of spindle distance (700 mm) and work area; stro...
SW BA ONE8
For the rare cases where single- spindle pre- or post-machining is indispensable, SW has the solution: the BA one8. Just like the BA one6, the BA one8 is designed for perfect integration into your ...
SW BA W02-22
Precision and maximum dynamics for economical freeform surface machining are the special domain of the new BA W02. The machining center is setting new standards in 5-axis machining with linear and ...
SW BA W04-22
If you are searching for the optimal MC for machining aluminium parts, look no further. The W04 – with direct drive technology in all axes – is equipped with linear motors in the X-, Y- and Z-axes,...
SW BA W04-22 BLOCK
If you are searching for the optimal MC for machining aluminium parts, look no further. The W04 – with direct drive technology in all axes – is equipped with linear motors in the X-, Y- and Z-axes,...
SW BA W04-42
If you are searching for the optimal MC for machining aluminium parts, look no further. The W04 – with direct drive technology in all axes – is equipped with linear motors in the X-, Y- and Z-axes,...
SW BA W06-12
Do you machine large aluminium workpieces such as gearbox housings or bedplates? Are they around 600 mm long? Is a large proportion of your cycle times due to non-productive times? The BA W06 – wit...
SW BA W06-1W
The BA W06-W, BA W06, and BA W04 are among the quickest machining centers available on the market. The BA W06-2W, with independent Z-axes and an integrated loading unit, is equipped for workpiece p...
SW BA W06-22
Do you machine large aluminium workpieces such as gearbox housings or bedplates? Are they around 600 mm long? Is a large proportion of your cycle times due to non-productive times? The BA W06 – wit...
SW BA W06-2W
The BA W06-W, BA W06, and BA W04 are among the quickest machining centers available on the market. The BA W06-2W, with independent Z-axes and an integrated loading unit, is equipped for workpiece p...
SW BA W06-32
Do you machine large aluminium workpieces such as gearbox housings or bedplates? Are they around 600 mm long? Is a large proportion of your cycle times due to non-productive times? The BA W06 – wit...
SW BA W06-42
Do you machine large aluminium workpieces such as gearbox housings or bedplates? Are they around 600 mm long? Is a large proportion of your cycle times due to non-productive times? The BA W06 – wit...
SW BA W08-12
Brand new, extremely fast, and future-oriented. Do you still produce large, light metal workpieces such as 8-speed gearbox housings on single-spindle machines? That era is over. The market is progr...
SW BA W08-22
Brand new, extremely fast, and future-oriented. Do you still produce large, light metal workpieces such as 8-speed gearbox housings on single-spindle machines? That era is over. The market is progr...
SW BM 1250
Why use a rotary dial machine when you can have multiple spindle heads mounted in a monobloc? In the BM 1250, the fixtures holding the parts travel to the tools as with a pick-up machine. This make...
SW BX 621
Robust, cost-effective and innovative: the twin-spindle, single-table BX 621, featuring the patented mono-wall design. Specially developed for this machining center, the mono-wall provides closed ...
YASDA H30i
YASDA H40I
Stable, high-precision 5-axis machining for everything from 5-face machining to complex shapes