BAILEIGH LF20
HVAC shops demand a lot out of their equipment, so when Baileigh Industrial developed the LF-20 Pittsburgh machine, they knew it had to be able to last. The LF-20 Pittsburgh machine is made from o...
GMC PL-16E
Capacity: Pittsburgh Lock - 16Ga. to 20Ga. Double Seam Lock- 16Ga. to 20Ga. Drive Cleat Lock- 22 Ga. To 24Ga. Power Flanger- 16Ga. to 20Ga. Depth of pocket- 1/2...
GMC PL-18E
Capacity: Pittsburgh Lock - 26 Ga. to 18 Ga. S Drive Lock- 26 Ga. to 22 Ga. Right Angle Lock -26 Ga. to 18 Ga. Drive Cleat Lock- 26 Ga. To 22Ga. Double Sema Lock- 26 Ga. to 18 Ga. Power...
GMC PL-20E
Capacity: Pittsburgh Lock - 20 Ga. to 26Ga. Double Seam Lock- 20 Ga. to 26Ga. Drive Cleat Lock- 22 Ga. To 26Ga. Power Flanger- 20 Ga. to 26Ga. Depth of pocket- 5/...
LOCKFORMER 20 GAUGE BUTTON PUNCH SNAPLOCK
The Button Punch Snap Lock Machines form a two piece seam that greatly simplifies ductwork assembly. The male seam is a button, the female seam is a lock and the two snap together for a flush corne...
LOCKFORMER BUTTON PUNCH 20
The Button Punch Snap Lock Machines form a two piece seam that greatly simplifies ductwork assembly. The male seam is a button, the female seam is a lock and the two snap together for a flush corne...
LOCKFORMER BUTTON PUNCH 24
The Button Punch Snap Lock Machines form a two piece seam that greatly simplifies ductwork assembly. The male seam is a button, the female seam is a lock and the two snap together for a flush corne...
LOCKFORMER DRIVE TURN HEMMING
The Lockformer® Skip Dent Indexing Roll is the heart of the system. The indexer is the first roll and has four pins and two milled ridges. The control lever determines whether the blank is hemmed a...
LOCKFORMER DS CONNECTOR 14STA
This Lockformer® 14-Station Connector Machine is for the contractor who has need for only one duct connector profile inboard but wants the flexibility of two outboard auxiliary forming stations. I...
LOCKFORMER OVAL/ROUND PIPE 7STATION
Available in either 7-station or 9-station (for pre-curl) machines which fabricate both male and female forms for Reeves-type snap lock. Each lock is formed on flat sheets with no restrictions on t...
LOCKFORMER OVAL/ROUND PIPE 9STATION
Available in either 7-station or 9-station (for pre-curl) machines which fabricate both male and female forms for Reeves-type snap lock. Each lock is formed on flat sheets with no restrictions on t...
LOCKFORMER PITTSBURGH 20GA
The 20 gauge Pittsburgh rollforming machines have 5 forming stations with 2 forming positions. One inboard forming position forms the Pittsburgh lock and one auxiliary or outboard forming position ...
LOCKFORMER PITTSBURGH 24GA
The 24 gauge Pittsburgh rollforming machine has 5 forming stations and 1 inboard forming position. The forming chassis is constructed of 1/2" steel plate. This machine is compact and lightweight an...
LOCKFORMER PITTSBURGH LOCK 14
The 14, 16 and 18 gauge Pittsburgh rollforming machines have 7 forming stations with two forming positions. One inboard position forms the Pittsburgh lock; and one auxiliary or outboard position ha...
LOCKFORMER PITTSBURGH LOCK 16
The 14, 16 and 18 gauge Pittsburgh rollforming machines have 7 forming stations with two forming positions. One inboard position forms the Pittsburgh lock; and one auxiliary or outboard position ha...
LOCKFORMER PITTSBURGH LOCK 18
The 14, 16 and 18 gauge Pittsburgh rollforming machines have 7 forming stations with two forming positions. One inboard position forms the Pittsburgh lock; and one auxiliary or outboard position ha...
LOCKFORMER PITTSBURGH LOCK 20
The Pittsburgh Lock revolutionized the HVAC Industry in the late 1940’s and is still used today for its strength and ease in assembling ductwork. The Super Speed 20 and Model 20 Pittsburgh rollfor...
LOCKFORMER PITTSBURGH LOCK 20 SUPER SPEED
The Pittsburgh Lock revolutionized the HVAC Industry in the late 1940’s and is still used today for its strength and ease in assembling ductwork. The Super Speed 20 and Model 20 Pittsburgh rollfor...
LOCKFORMER PITTSBURGH LOCK 24
The 24 gauge Pittsburgh rollforming machine has 5 forming stations and 1 inboard forming position. The forming chassis is constructed of 1/2" steel plate. This machine is compact and lightweight an...
LOCKFORMER SPIN COLLAR MAKER #12
Just cut galvanized stock (24 gauge & lighter) to width and length, set the diameter from 4" to 16", and push the blank against the automatic stop. A synchronized die notches the lead edge for easy...
LOCKFORMER SPIN COLLAR MAKER #6
Just cut galvanized stock (24 gauge & lighter) to width and length, set the diameter from 4" to 16", and push the blank against the automatic stop. A synchronized die notches the lead edge for easy...
LOCKFORMER STANDING S CLEAT
In just one pass, form a shape that combines a conventional "S" cleat with a standing seam for greater strength and rigidity. This seam is adaptable in fabrication of large trunk or branch lines in...
LOCKFORMER SUPER 11 CLEATFORMER
When the job calls for heavy-duty “giants,” this machine tool is it. For a multitude of HVAC rollforming shapes and profiles, look no further than the Super 11 Cleatformer. Pittsburgh Lock, Acme/D...
LOCKFORMER TDC 14 STATION
Rollforming your own sealable flanges on transverse duct ends during the manufacturing process has never been easier. The TDC flange, formed on the machine’s left-hand auxiliary, has unique, snap-o...
LOCKFORMER TDC 14 STATION - 2 PLATE
Rollforming your own sealable flanges on transverse duct ends during the manufacturing process has never been easier. The TDC flange, formed on the machine’s left-hand auxiliary, has unique, snap-o...
LOCKFORMER TDC V
This TDC-V Rollformer has 12 forming stations and produces TDC™ flanges from 18 to 26 ga. at speeds of up to 50 feet per minute! Famous Lockformer quality construction with an industrial motor, hi...
LOCKFORMER TDC V 16
The TDC® V Rollformer has 12 forming stations and produces TDC® flanges at speeds of up to 50 feet per minute! This is the only transverse duct connector machine on the market certified to comply ...
LOCKFORMER TRIPLEX CLEATFORMER
“S” cleats and more – A flexible Lockformer, designed for super high productivity of inboard cleats. The triplex design has two inboard and two outboard forming positions allowing bearing support o...
RAMS 2006
This unit comes with a 1 HP electric motor, 110-115V single phase. We use Torrington Needle Bearings and hardened steel components throughout, (62 Rockwell). The cabinet is heavy gauge steel with a...
RAMS 2013S
The unit comes with a 3 HP electric motor, 208-230V single phase .We use Torrington Needle Bearings and hardened steel components throughout (62 Rockwell). The cabinet is heavy gauge steel with a H...
RAMS 2014
The RAMS 2014 Auxiliary Machine is like no other machine available on the market today. Features a 5 HP motor 208-230V single phase. It was designed specifically for ease of use, flexibility and th...
RAMS 24-28
The unit comes with a 1/2 H.P. electric motor, 115/208-230V, 5.4 AMPS 60 cycle single phase. We use Torrington Needle Bearings and hardened steel components throughout, 62 Rockwell. This unit featu...
TIN KNOCKER 16GA PITTSBURGH
IT COMES LOADED!!! The 16 gauge Pittsburgh Lock machine has 7 forming stations with 2 forming positions. One position forms the Pittsburgh Lock, while the outboard position has the ability of formi...
TIN KNOCKER 20GA BUTTON LOCK
Tin Knocker's 9 Station Button Lock Rollformer means no hammering over of edges. The Button Lock roll former comes with "male" tooling on one side and "female" on the opposing side. A fast, effecti...
TIN KNOCKER 20GA PITTSBURGH
A workhorse! This 5 station 20 Gauge Pittsburgh lock rollformer is offered with choice of Drive Cleat or Acme rolls on the other outboard side. Powered by a 1 HP motor with V-belt drive, this machi...
TIN KNOCKER 24 COLLAR MAKER
Notch,bead,crimp and roll complete round starting collars, 3" to 14" in diameter out of 24 to 30 gauge galvanized - in only one pass! Just cut to width and length or use scrap. This machine uses ei...
TIN KNOCKER 24GA PITTSBURGH
On the job site or in the shop, this portable little rollformer is a work horse for 24 gauge and lighter material. It is available with power flanging attachment and is perfect for field use. With ...
TIN KNOCKER ROLL FORMER, FOURPLEX, S&DRIVE
Turn scrap into drives, quickly and efficiently. Let this machine pay for itself-and fast! A great connector machine and more! Truly a poly-functional machine, the Tin Knocker Fourplex is the epi...
TIN KNOCKER S DRIVE / PLUS
The TK S & Drive Plus roll former is a versatile performer. It's payback in scrap savings will pay for itself in no time. When fitted with auxiliary rolls, the payback is even faster. The machine c...
