GLEASON 610베벨 기어 생성기

ID#:153731
상표:GLEASON
모델:610
형태:베벨 기어 생성기
조건:중고 - 우수
년도:1974
판매자:판매자가 누군지보기 ...
위치:Michigan
미국
Stock # :16078
가격:

투기

Lower:73
최대 기어경:508 mm
형식:Gear Generator
Upper:93
치수:118" x 86.5" x 70
무게:17,500 lbs

EQUIPPED WITH:

Hydraulic Work Holding
Cutter Body
Chip Conveyor
Coolant System
Hydraulic System
Pendant Control

CATALOGUE SPECIFICATIONS:

CAPACITY
Outside Cone Distance
Maximum: 10"
Minimum: 2.75"
Maximum gear pitch diameter (16 deg. diameter cutter,
30 deg, spiral angle):20"
Cutter diameters: 9", 10.5", 12",14",16", 18"
Whole depth:1.250"
Root angle:60 to 80 deg.
Face width:3.0"
Extreme ratio (minimum):2.25 to 1
Number of teeth:20 to 75
WORK SPINDLE
Diameter of taper hole at large end:3-27/64"
Taper per foot:50"
Depth of taper: .625"
FEEDS AND SPEEDS
Cutter speeds (per minute)for roughing:15.6' to 87.7'
Feeds (seconds per tooth) for roughing:3 to 35
Cutter speeds (per minute) for finishing: 6.8' to 20.5'
Feeds (seconds per tooth) for finishing:3 to 9

ELECTRICAL 50 Cycle 60 Cycle
Main motor (2 speed):10.5 HP 1800-900 RPM 1500-750 RPM
Hydraulic motor:7.5 HP 1800 RPM 1500 RPM
Coolant motor: 2 HP 3600 RPM 3000 RPM
Chip separator:25 HP 1800 RPM 1500 RPM

Floor space: 118" x 86.5"
Height: 70"
Weight: 17,500 lbs.

세부내역

immediate availability, inspect on power. 20" max. pitch diameter, 1.250" whole depth, 3" face width, 60-80 deg. root angle.
equipped with: hydraulic work holding, pendant control, chip conveyor, index plate, change gears

이 모델에 대해 더욱

더많은 정보를 보기 위해서는 GLEASON 610, 리뷰포함, 브랜드 정보, 사진, 비디오 등, 여기를 클릭하세요..