TOS SUS-63엔진 선반

ID#:157178
상표:TOS
모델:SUS-63
형태:엔진 선반
위치:미국
Stock # :20630
가격:

투기

Lower:17
스윙:25 "
중심:320 "
스핀들 보어:3.2 "
동력:25 hp
Upper:37
분당 회전속도:1120 rpm
슬라이드 위 스윙:15.3 "
치수:400" x 69" x 55"
무게:20,900 Lbs.

Reference #20630

25" X 320" TOS Engine Lathe
Model: SUS63
Serial No: 0440608

Maximum Swing Over Bedways ............ 25"
Maximum Swing Over Cross Slide ........ 15.3"
Distance Between Centers .............. 320"
Spindle Hole Diameter ................. 3.2"
Spindle Speeds: (22) .................. 9-1120 RPM
Spindle Nose (Camlock) ................ D1-11
Cross Slide Traverse .................. 16.5"
Tool Rest Traverse .................... 8"
Dimensions of 4-Way Tool Post ......... 8.5" x 8.5"
Number Positions 4-Way TP Adjustable .. 24
Tailstock Quill Diameter .............. 5.1"
Tailstock Quill Travel ................ 13"
Tailstock Taper ....................... #6 MT
Tailsock Max Thrust Force ............. 7,720 lbs
Maximum Work Piece Capacity ........... 13,300 lbs
Longitudinal Feeds: ................... .0022-.0591 IPR
Threads, Inch ......................... 0.125-56
Threads, Metric ....................... .5-112 MM
Threads, Whitworth .................... .25-56 TPI
Threads, Module ....................... .25-56
Threads, DP ........................... .5-112
Threads, CP ........................... .0015-3.5
Bed Width ............................. 23"
Bed Height ............................ 32"
Machine Dimensions (L x W x H) ........ 400" x 69" x 55"
Machine Weight ........................ 20,900 lbs

EQUIPPED WITH:
16" 4-Jaw Chuck
4-Way Tool Post with 24 Adjustable Positions
Inch/Metric/Whitworth/Module/DP & CP Threading
Hardened & Ground Ways
(1) Steady Rest (8" Capacity)
Leadscrew & Feed Shaft Support
Coolant System
Full Length Chip Pan
30 HP Spindle Drive Motor 220/380/440/3/60

Also Available at Additonal Cost:
(2) 26" 4-Jaw Chucks (#20644 & #20645)
(1) Adjustable Tool Post Milling Attachment (#20640)
(1) Fixed Tool Post Mill Attachment (#20641)

Inspect Under Power In Plant!

세부내역

25" x 320" Tos SUS 63, 15.3" O/C, 9-1120 RPM, 13,300 lb Cap., 3.2" Bore, 1979 #20630

이 모델에 대해 더욱

더많은 정보를 보기 위해서는 TOS SUS-63, 리뷰포함, 브랜드 정보, 사진, 비디오 등, 여기를 클릭하세요..