GANESH CYCLONE-52TTMY5 축 이상 CNC 선반

ID#:162071
상표:GANESH
모델:CYCLONE-52TTMY
형태:5 축 이상 CNC 선반
조건:새로운에서 주식
년도:2016
제어:CNC (Mitsubishi 720L)
판매자:판매자가 누군지보기 ...
위치:California
미국
가격:

투기

Lower:2
치수:Length 150” / Width 105”/ Height 90”
무게:26,500
Upper:22
제어반:CNC (Mitsubishi 720L)

CYCLONE-52 TTMY DUAL SPINDLE CNC LATHE SPECIFICATIONS:

CAPACITY
Turning diameter Inch 7.48” (190 mm) maximum, 6.7” (170mm) standard
Turning length / Center distance Inch 15.75” (400mm) / 36.22” (920mm) between centers

MAIN SPINDLE / SUBSPINDLE
Identical Mitsubishi Integral Spindles
Spindle nose / Bearing Diameter ASA Size A2-5
Spindle Bar Capacity Inch 2.0” (51 mm)
Chuck Size Inch 8”
Spindle Center Height Inch 46.45” (1,180mm)
Maximum spindle speed RPM 60-4,000 RPM (Integral Spindle)
Spindle motor horsepower Horsepower 20-HP peak, 15-HP (30-minute duty rating)

LIVE TOOL TURRETS Dual 12-Station Live Tool Turrets
Number of turret stations 16 x 2 24 (Any combination of 24 ID, OD or Live tool stations)
Index time (adjacent tool / 180 index) Seconds 0.2 seconds / 1.2 seconds
Live Tool Power / RPM HP 7-HP / 6,000 rpm, 14.75 ft. lbs. torque (20Nm)
Tool Size / Collet Size Inch 25mm (for square tool and round tool) / ER-32
Tool Holder Type & Size BMT-65 Base Mount Tooling
Turret Thru-The-Tool-Coolant Rated to 1,000 PSI for High Pressure coolant option

“Y” AXIS
Y axis travel Inch 2.75” of travel - ± 1.378” off of centerline (±35mm)
Y axis Rapid Feed Rate Inch 236 Inch Per Minute (6m per minute)

“C” AXIS
Spindle Radial Resolution 0.001° 360,000 radial positions with full contouring capability

“B” AXIS (sub spindle travel)
B Axis Rapid Traverse Rate Inch 1,573 Inch Per Minute (40m per minute)
B Axis Travel Inch 25.59” (650mm)

AXIS SPECIFICATIONS
Axis Travel – X1, X2 - Axis Inch X1 5.9” (150mm), X2 9.05” (230 mm)
Axis Travel – Z1, Z2 - Axis Inch Z1 17.32” (440mm), Z2 17.32” (440mm)
Rapid Travers Rate – X1, X2 -Axis ipm 630 ipm (16 m/minute)
Rapid Travers Rate – Z1, Z2 - Axis ipm 1,573 ipm (40 m/minute)
Minimum Programmable Input Inch 0.000039” (0.001mm)
Positioning Repeatability – X & Y-Axis Inch 0.000050” (0.012 mm)
Positioning Repeatability – Z-Axis Inch 0.0008” (0.002 mm)
Positioning Accuracy – X & Y-Axis Inch 0.00010” (0.004 mm)
Positioning Accuracy – Z-Axis Inch 0.00016” (0.008 mm)

FLUID CAPACITY
Hydraulic System Gallons 10.5 gallons (40 Liters) with 3-HP (2.2kw) pump motor , 130-PSI
Coolant System HP 2x 1.7 hp pumps / 70-gallon (280 Liters) coolant tank
MACHINE WEIGHT Pounds 22,500lbs (10,200 kgs)
ELECTRICAL REQUIREMENT KVA 52KVA (220VAC, 3-phase, 60 Hz, 130 amps)
AIR REQUIREMENT PSI 80-psi @ 8-cfm for parts catcher, ejector, oil mist lubricator
MACHINE DIMENSIONS Length 159” / Width 98”/ Height 79” includes chip conveyor (Inches)

Note: SPECIFICATIONS AND PRICING ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE!

세부내역

Automatic Screw Machines, Multi-Spindle : Dual Spindle, Dual Turret : Multi Axis CNC Lathe : with "Y" Axis 2.0” Bar Capacity, 20-HP Mitsubishi Integral Main & Subspindle,“Y”- Axis on Upper turret, “C” Axis on Main & subspindle. Dual 12 Station Live Tool Turrets for 24- Tool Stations Powerful Mitsubishi 720L Multi-Tasking CNC Control.

Ganesh Cyclone-52 TTMY Dual 12-station servo driven tool turrets provide 24-tool stations that feature 0.2-second bi-directional indexing and shortest path indexing logic for fast tool changes. The turret disk does not lift out from the turret body during index to prevent chips and coolant from being sucked into the coupling. The 3-piece face gear coupling to locks into position within 3-microns. Both 12-station tool turrets features 7-HP driven tool capability on all 32-tool stations, providing the muscle needed to handle cross and end-working milling. The 6,000-RPM driven tool system provides a constant cutting torque of 14.75 ft lbs (20 nm). The BMT-65 tooling system used on the Cyclone-52 is much stronger with greater rigidity and far superior alignment characteristics than other tooling system. Mix and match tooling on any station for the ultimate in set-up flexibility. The turret gear train is oil mist lubricated to keeps moisture out and to maintain a constant temperature. The tool count can be easily increased by using toolholders that mount tooling on the front and backside as well as having additional tooling accessed with a Y-axis shift.

다운로드

GANESH CYCLONE-52TTMY (474키로 바이트)
파일을 다운 받기 위해서는 여기를 누르십시요

이 모델에 대해 더욱

더많은 정보를 보기 위해서는 GANESH CYCLONE-52TTMY, 리뷰포함, 브랜드 정보, 사진, 비디오 등, 여기를 클릭하세요..