GANESH CYCLONE-32NCYCNC 선반

ID#:162074
상표:GANESH
모델:CYCLONE-32NCY
형태:CNC 선반
조건:새로운에서 주식
년도:2017
판매자:판매자가 누군지보기 ...
위치:California
미국
가격:
$79,990.00 USD

투기

Lower:2
바 용량:1 "
#축:4
동력:10 hp
최대 RPM:6000 rpm
Upper:22
치수:L 72.9” , W 63.4” , H 75.5"
무게:5500
제어반:CNC (Ganesh)

CYCLONE NCY-32 MACHINE SPECIFICATIONS

AXIS TRAVELS
CNC Controlled Axis # 4 (X, Y, Z, C) w/High-Performance C-axis
X-Axis Travel (Vertical Tool) Inch 7.5” (190mm) Linear Ways
Y-Axis Travel (Cross Tool) Inch 11.4” (290mm)Linear Ways
Z-Axis Travel (Sliding Headstock Inch 6.5” (165mm) Linear Ways
C-Axis Travel (Rotational Axis) Degrees 360 degrees (360,000 radial positions)

SPINDLE
Spindle Bore (Usable bar diameter) Inches 1.25” (32mm) 36mm collet adapter available
Spindle Speed Range RPM100-6,000 RPM (or Hi Torque 4,000 RPM Optional)
Spindle Horsepower HP 10-HP
Spindle Center Height Inches 38” (965mm)
Rigid Tapping on Main Spindle Yes
Spindle Nose A2-4

TOOLING SYSTEM
Number and size of turning stations#6 Tools of ½” or 12mm (5 stations of 5/8” Optional)
Number of Internal Static Tools#5 ID tool stations (25mm bores) for tool bushings/collets
I.D. Tool Bores (Round Shank) mm 25mm bore for ER-20 collet, split or solid tool bushings

DRIVEN TOOL SYSTEM
Number of cross working driven tools # 4-cross driven tool stations with ER20 collet holders
Number of end working live tools # 3-axial driven tool stations with ER20 collet holders
Size of driven tools (round shank)Inch ER-20 collet capacity (1/16” – ½”) (1-13mm) diameter
Rigid Tapping with Driven Tools YES
Driven Tool programmable range RPM 0-4,000 RPM – stepless speed range
Driven Tool HP HP 2.0 (HP) 1.5kw (Radial Live Tools)

AXIS DRIVES
Rapid Travers Rate – X,Y,&Z axis ipm 1.181 ipm (30m/minute)
Maximum federate for thread cutting ipm 236 (ipm (6m/minute)
Minimum Programmable Input Inch 0.000039” (0.001mm)
C-Axis Resolution Degrees 0.001 degree (360,000 Radial Positions)
Brushless AC Servo Motor Drive HP X = 1.5HP (1KW), Y&Z =.75 HP (.5 KW)
Ballscrew diameter Mm 25mm double-nut ballscrews

SYSTEM REQUIREMENTS
Connected Load Power Consumption KVA 16 KVA – 42 amps @ 208-240 vac
Pneumatic Requirements 80 – 90 psi @ 1 cfm for parts catcher and spindle brake
Coolant Pump Motor/ Tank Capacity ¾ HP / 25 gallon tank with dual filtration
Automatic Metered Lubrication system 3-6cc/15-minute (adjustable lubrication flow rate

MACHINE DIMENSIONS
Floor Space – L X W Inch 72.9” X 63.4” (1,852 x 1,611mm)
Machine Height Inch 75.5” (1,919 mm)
Machine Net Weight Pounds 5,500 lbs (2,500 kgs)

Note: SPECIFICATIONS AND PRICING IN THIS DOCUMENT ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE!

세부내역

GANESH Cyclone 32-NCY 4-Axis CNC Turning Center.
Full Contouring “C” Axis & “Y” Axis 18-Tool Stations with 7-Live Tools
For Bar work, 2nd Operation machining, & Chucking work.
10-HP, 6,000 rpm, 1-3/8” Bar Capacity.
18-Tools with 7-Driven toolholders included.
High-Performance C-axis, 18” Y-axis travel.

The CYCLONE NCY-32 is a 4-axis 1.25” (32mm) bar diameter sliding headstock CNC lathe without a guide bushing, which facilitates faster setups, greater workpiece concentricity, and superior cutting rigidity over guide bushing style Swiss lathes. The CYCLONE NCY-32 does not require the use of ground barstock or a guide bushing like the Swiss-style machines must use, and the bar remnant is less than a quarter of the wasted remnant length of a Swiss style lathe. All of these features represent a significant costs savings when using this machine design. The CYCLONE NCY-32 CNC screw machine configuration also allows for shorter cycle times due to the enhanced rigidity and the ability to aggressively rough-out material and finish with a second tool, all while achieving greater tool life. The CYCLONE NCY-32 can use as many tools as necessary to rough and finish a feature on the workpiece, unlike conventional Swiss machines that are limited by the length of the guide bushing, and must make the rough and finish cut while burning up the tool in one-pass by micro-feeding the tool. These advantages are particularly evident in tough materials and in work with low length-to-diameter ratios.

The GANESH CYCLONE NCY-32 features 18-tool stations which comprise of a bank of 4-live cross tools, a bank of 3-axial live tools, 6-turing tool stations, and 5-ID tool stations, all in a gang configuration to complete single-sided work in one operation. Additional cutting tools can be utilized in machining the workpiece by double-tooling the ID-tools stations with dual-insert boring bar holders for rough and finish boring, boring and turning, boring and threading etc. with twin insert boring bars.

The CYCLONE 32-NCY X-axis stroke is 7.5”, the Y-axis moves 11” for full off-centerline machining capability, and the Z-axis features 6.5” of headstock movement. The full rotary C-axis has 360,000 radial positions (0.001-degree resolution) for engraving and other complex radial machining details. The 5-station fixed ID gang tooled slide can use 25mm solid bushings or ER-20 collets to hold cutting tools. All 7 of the rotary toolholders included with the machine also use the same ER-20 collets for tool shanks up to ½” (13mm).

The 6173-pound GANESH CYCLONE-32 NCY is equipped with a 10-horsepower spindle motor with a 6000-rpm spindle (4,000 RPM Hi-Torque option), and features rigid tapping. A hydraulic cylinder provides a secure grip on the workpiece for heavy machining applications, without the slip-back so often seen when air collet closers are used.

The CYCLONE 32-NCY is built using World-Class premium components, with Japanese motors and drives from Mitsubishi, and premium ballscrews, bearings and linear ways. This compact machine comes complete with a parts catcher, and hydraulic chucking featuring a Traub A-32 “True-Length” collet chuck for barstock up to Ø1.25”.

이 모델에 대해 더욱

더많은 정보를 보기 위해서는 GANESH CYCLONE-32NCY, 리뷰포함, 브랜드 정보, 사진, 비디오 등, 여기를 클릭하세요..