TAYLOR WINFIELD솔기 용접공

ID#:204881
상표:TAYLOR WINFIELD
형태:솔기 용접공
Serial # :54532
판매자:판매자가 누군지보기 ...
위치:Tennessee
미국
Stock # :5240
가격:

투기

Lower:84
동력:30 kV·A
Upper:104
스로트 깊이:457.2 mm

세부내역

Taylor Winfield Circumferential Seam Welder:

Model # LSCB-18-LGD, Original Serial No. 54532

30 KVA / 220 Volts / 60 Hz / Single Phase / AC

18” throat depth

0.75 to 2.5 secondary voltage range, adjustable with tap switch

8-step transformer tap switch, with series/parallel

16 total steps of coarse weld heat regulation

10,000 maximum secondary amps, short circuit

4.5” diameter air cylinder, with long stroke (approximately 4” +)

1,272 pounds of weld force available @ 80 PSI

Transformer, control and weld heads are water-cooled

Lower weld wheel is gear driven, upper is an idler (not driven)

Weld wheels will be designed & installed to suit your specific application

Machine initiation will be a two (2) stage shrouded foot switch

Machine will be equipped with a new or refurbished current model microprocessor type welding control with fully programmable functions and a 1200-amp water-cooled SCR firing contactor.

Also included in the control will be a normally extra-cost 200-amp circuit breaker type machine disconnect switch, with flange mounted operator, safety interlocked per OSHA standards