QUALITY IMPORT RADIUS AND ANGLE DRESSER반경 첨부 파일

ID#:21563
상표:QUALITY IMPORT
모델:RADIUS AND ANGLE DRESSER
형태:반경 첨부 파일
조건:새로운에서 주식
판매자:판매자가 누군지보기 ...
위치:Ohio
미국
Stock # :439-1000
가격:

투기

Order No: 4391000
Type: Radius and Angle Dresser
Size: 12in. Cap.

Details:
• Radius and Angle Dresser
• 12" Capacity
• Versatile for O.D. and I.D. surface grinding
• No hand contact near the dressing point
• Easy and quick accurate radius setting
• The bigger knob controls radii and the smaller knob controls angular movements
• Radius is set on the grinder by measuring over the two pins or by inserting a gage block
• Inside or outside radius is determined by using the hand pins
• Use 3/8in. shank diamond
• Specifications of Max wheel diameter is 12in.
• Convex radii is 0~1-5/8in.
• Concave radii is 0~4in.
• Tangent travel is 2in.
• Center line of tool is 3.4in.
• Overall length is 16.61in.
• Weight is 30 lbs.
• Accuracy: Squareness per 2in. of face plate to dresser arm is 0.0005in.
• Squareness of face plate to base is 0.0006in.
• Center run-out of dovetail groove to center is 0.0006in.

Condition: New
Price: $350.00

세부내역

• Radius and Angle Dresser
• 12" Capacity
• Versatile for O.D. and I.D. surface grinding
• No hand contact near the dressing point
• Easy and quick accurate radius setting
• The bigger knob controls radii and the smaller knob controls angular movements
• Radius is set on the grinder by measuring over the two pins or by inserting a gage block
• Inside or outside radius is determined by using the hand pins
• Use 3/8in. shank diamond
• Specifications of Max wheel diameter is 12in.
• Convex radii is 0~1-5/8in.
• Concave radii is 0~4in.
• Tangent travel is 2in.
• Center line of tool is 3.4in.
• Overall length is 16.61in.
• Weight is 30 lbs.
• Accuracy: Squareness per 2in. of face plate to dresser arm is 0.0005in.
• Squareness of face plate to base is 0.0006in.
• Center run-out of dovetail groove to center is 0.0006in.

이 모델에 대해 더욱

더많은 정보를 보기 위해서는 QUALITY IMPORT Radius and Angle Dresser, 리뷰포함, 브랜드 정보, 사진, 비디오 등, 여기를 클릭하세요..