CLAUSING MA35200오일 필드 & 중공 스핀들 선반

ID#:248996
상표:CLAUSING
모델:MA35200
형태:오일 필드 & 중공 스핀들 선반
조건:새로운에서 주식
판매자:판매자가 누군지보기 ...
위치:Michigan
미국
Stock # :8436
가격:

투기

Lower:98
스윙:878.8 mm
중심:5,080 mm
스핀들 보어:317.5 mm
Upper:118
동력:22.4 kW
분당 회전속도:400 rpm

NEW Clausing Model MA35200 Big Bore Lathe

Asset #: 8436
Serial #: 11050852

Capacity:
Swing Over Bed, 34.6”
Swing Over Cross Slide, 24”
Swing In Gap, 53”
Gap Width From Headstock, 23.6”
Center Height Over Bed, 17.3”
Center Height From Floor, 44.1”
Center Distance, 200”
Max. Weight Between Centers, 8,800 Lbs.
Max. Weight With Steady Rest, 11,000 Lbs.
Max. Unsupported Weight In Chuck, 5,500 Lbs.

Bed:
Bed Width w/ Std. Auxiliary Guides, 22”
Bed Height From Floor, 26.77”

Headstock:
Spindle Bore, 12.5”
Spindle Nose, A2-20
4-Speed Auto Change Variable-Speed w/ CSS:
Spindle Speed Range #1 12-85 rpm
Spindle Speed Range #2 23-170 rpm
Spindle Speed Range #3 55-300 rpm
Spindle Speed Range #4 110-400 rpm
Spindle Drive Motor, 30 HP Standard

Carriage:
Cross-Slide Travel, 26.4”
Compound Rest Travel, 17.7”
Tool Post 4-Way, 8 Position w/ T-Slots

Tailstock (Manual):
Quill Diameter, 4.5”
Quill Travel, 7.87”
Quill Taper, 6MT
Bearing Surface On Bed Ways, 19.75”

Thread and Feed Range:
Longitudinal Feeds (In/Rev), 0.0018-0.1
Cross Feeds (In/Rev), 0.0009-0.05
Longitudinal Rapid Feeds (In/Min), 80
Cross Rapid Feeds (In/Min), 40
No. Of Metric Threads, 60
Range (Mm), 1-56
No. Of Inch Threads, 60
Range (TPI), 1/2-28
No. Of Module Threads, 60
Range (MOD), 0.25-14
No. Of Diametral Pitch Threads, 60
Range (Mm), 2-112
Leadscrew Pitch (TPI),2

Machine Dimensions & Weight:
Overall Length, 283"
Base Width, 34.6"
Overall Width, 71"
Overall Height, 54"
Weight, 42,000lbs.
Power, 460V, 3P, 60Hz

Standard Equipment:
Chuck Guard w/ Limit Switch
30 HP Spindle Motor with Inverter Drive
Auto Power Off with 2 Adjustable Position Stops
Mechanical Safety Device
Lockable Main Switch
Electrical Cabinet Ventilation Fans
Electromagnetic Spindle Brake
6-Way Rapid Traverse
6-Way Power Feed
4-Way, 8-Position Tool Post w/ T-Slots
Leadscrew/Feed Rod Support
Coolant System, Internal
Auto Lube
Thread Dial
QIK Threading System and API Threads
Manual Tailstock w/ Saddle Pin Body Movement and Anti-Slip Lock
Gears and Bed Ways Hardened and Ground
Traveling Splash Guard
Built-in Air Power Supply Tube
Halogen Work Light
Leveling Pads with Screws
Dead Center
Operation Manual
Tool Box with Misc. Items

Options that are included with this machine:
12.5” Spindle Bore
Dual Chuck Adaptor with Guarding
4-Range Auto Change, Variable Speed within each Range including CSS (Constant Surface Speed)
Taper Attachment, Installed

Additional Options Available:
Small Steady Rest, 1.5” to 15.75”, $ 6,820.00
Large Steady Rest, 13.8” to 27.56”, $ 7,450.00
Follower Rest, 1.5” to 7”, $ 2,915.00
4-Jaw Independent Chuck, A2-20 Spindle Nose, $ 9,450.00
28” 4-Jaw Independent Chuck, A2-20 Spindle Nose, $ 12,400.00

세부내역

Clausing MA35200 Large Swing, Big Bore, Lathe. New on the Skid. 12.5" Bore, Taper Attachment, Variable Speed Ranges with Constant Surface Speed.

이 모델에 대해 더욱

더많은 정보를 보기 위해서는 CLAUSING MA35200, 리뷰포함, 브랜드 정보, 사진, 비디오 등, 여기를 클릭하세요..