GLEASON 506기어 래핑기

ID#:287751
상표:GLEASON
모델:506
형태:기어 래핑기
년도:1978
판매자:판매자가 누군지보기 ...
위치:Illinois
미국
Stock # :gh951
가격:

투기

Lower:77
최대 기어 지름 :20 "
Upper:97
무게:15,000 lbs

Gleason No. 506 Hypoid Lapping Machine

S/N: 759107 New: 1978

EQUIPPED WITH:
The gear and pinion are automatically chucked and de-chuck. The gear and pinion are automatically meshed. Pre-selected amount of backlash is automatically introduced. High speed lapping controls. Four dial settings - 2 for the drive side, 2 for the coast side. Slurry pump and tank.

SPECIFICATIONS:
Gear outisde dia. max. 20" 508mm
Pinion outside dia. max. 10" 254mm
Offset of pinoin spindle center in either direction
from center of gear spindle (max.) 3" 76.2mm
Gear spindle nose to gear axis (min.) 4-1/2" 114.3mm
Gear spindle nose to gear axis (max.) 7-1/2" 190.5mm
Pinion spindle nose to gear axis (min.) 6-1/2" 165.1mm
Pinion spindle nose to gear axis (max.) 12" 304.8mm
Pinion shank length (from backing): Standard 3-4/5" x 3"
Brake load: Standard 20-200 in. lbs
Brake load: Optional 300 in. lbs
PINION SPINDLES Standard Large Bore
Dia. of taper hole at large end 3-29/32" 6"
Taper per foot 39/64" 3/4"
Depth of taper 3" 2-1/2"
GEAR SPINDLES
Dia. of taper hole at large end 2-19/64" 3-29/32"
Taper per foot 1/2" 39/64"
Depth of taper 3"
PINION SPINDLE SPEED RANGE
Standard 1800 & 1500 RPM
Optional 1200 & 900 RPM
ELECTRICAL EQUIPMENT 60 CYCLE 3 Phase, 460 Volt
Main motor 5 HP 1680 RPM
Hydraulic motor 5 HP 1800 RPM
Compound mixer 1/2HP 1800 RPM
Floor Area 86" x 93" x 72"
Electrical Panel 18" x 80" x 72"
Net weight 15,000 lbs

세부내역

Gleason No. 506 Hypoid Lapping Machine

이 모델에 대해 더욱

더많은 정보를 보기 위해서는 GLEASON 506, 리뷰포함, 브랜드 정보, 사진, 비디오 등, 여기를 클릭하세요..