GLEASON 516기어 래핑기

ID#:288212
상표:GLEASON
모델:516
형태:기어 래핑기
판매자:판매자가 누군지보기 ...
위치:Illinois
미국
Stock # :gh516x
가격:

투기

Lower:28
최대 기어 지름 :609.6 mm
Upper:48
무게:11,200 lbs

Gleason Model No. 516 Hypoid Spiral Bevel Gear Lapping Machine

EQUIPPED WITH:
Suitable for lapping of automotive and truck spiral bevel and hypoid gears and pinions operating at a 90-degree shaft angle with gear diameters up to 24" (609mm).

Eddy current brake. Hydraulic power supply unit w/accumulator. Hydraulic chucking unit both head s(less draw-in bars. Power movement of drive head in and out. Automatic preset backlash. Drive head spindle bore 3-39/32" dia. x 39/64" taper. Brake head spindle bore 2-19/64" dia. x .5" taper. Special lapping guards for 24" diameter SPC (swing-pinion-cone) feature, 3-way oscillation
for pinion head. Full complement of electrics (motors/controls) for 50/60 cycle.

SPECIFICATIONS:
Maximum gear diameter 24" (609mm)
Maximum pinion diameter 12" (304mm)
Offset of gear spindle above or below center
of pinion spindle (max) 6" (152mm)
PINION SPINDLE
Diam of taper hole at large end 3-29/32" (99.2mm)
Taper per foot 39/64" (15.478mm)
Depth of taper 3" (73.5mm)
Diameter of hole through spindle 3.740" (94.996mm)
GEAR SPINDLE
Diam of taper hole at large end 2-19/64" (58.34mm)
Taper per foot ½" (12.7mm)
Depth of taper 3" (73.5mm)
Diameter of hole through spindle 2.167" (55.04mm)
Electrical Equipment 60 CYCLE 50 CYCLE
Main Motor, 5 HP 1800 RPM 1500 RPM
Hydraulic Motor, ¾ HP 1800 RPM 1500 RPM
Lapping Compound Pump Motor,1 HP 1200 RPM 1000 RPM
Oscillating Drive Motor, ¼ HP 0-1725 RPM
Floor Space 85"x82" 216cmx208cm
Height 82" 208cm
Net Weight (Approx) 11,200 lbs 5,080 kg

세부내역

Suitable for lapping of automotive and truck spiral bevel and hypoid gears and pinions

이 모델에 대해 더욱

더많은 정보를 보기 위해서는 GLEASON 516, 리뷰포함, 브랜드 정보, 사진, 비디오 등, 여기를 클릭하세요..