TOSHIBA MACHINE BTH 110 R18 CNC수평 테이블 타입 보링

ID#:288453
상표:TOSHIBA MACHINE
모델:BTH 110 R18 CNC
형태:수평 테이블 타입 보링
년도:2007
판매자:판매자가 누군지보기 ...
위치:Michigan
미국
가격:

투기

Lower:48
스핀들 크기:4.3 "
테이블의 X-수평 TVL:100 "
머리의 Y-수직 TVL:80 "
동력:40 hp
분당 회전속도:4000 rpm
Upper:68
테이블 W:55.1 "
테이블-L:71 "
Z-스핀들 이동:60 "
제어반:CNC (TOSNUC 888.2)

QUOTATION
NASH TOOL & MACHINE SUPPLY, INC.
Warren, Michigan (Detroit suburb)
22701 Nagel Street
586-759-1250
fax 586-759-1254
nashmachinery@yahoo.com
www.nashmachinery.com

TOSHIBA BTH 110 R18 “HI CUBE” CNC HORIZONTAL BORING MILL
FEATURES TOSNUC 888.2 CONTROL, 38 ATC, 4000 RPM SPINDLE, AND 0.0001 DEGREE TABLE INDEXING
Serial number 144857; new 2006

Catalog specifications subject to revision;

Machine Specifications BTH-110.R18
Travel X-axis travel (Cross movement of table) mm (in) 2 500 (100)
Y-axis travel (Vertical movement of spindle head) mm (in) 2 000 (80)
Z-axis travel (Longitudinal movement of column) mm (in) 1 500 (60)
W-axis travel (Spindle extension) mm (in) 500 (20)
Distance from table surface to spindle center mm (in) 0 to 2 000 (0 to 80)
Distance from table center to milling spindle gauge plane mm (in) 600 to 2 100 (23.6 to 82.7)
Table Table working surface mm (in) 1 400 x 1 800 (55.1 x 70.9)
Table loading capacity kg (lbs) 10 000 (22 000)
Table surface configuration (Pitch to T-slots 160 mm, size 22 mm 9 T-slot
Minimum table indexing angle (B- axis) degrees 0.0001
Spindle Spindle diameter mm (in) 110 (4.3)
Spindle speed range min-1 6 to 4 000
Milling spindle nose diameter mm (in) 225 (8.8)
Type of spindle taper 7/24 taper No.50
Feedrate Rapid traverse rate X, Y Z mm/min (ipm) 18 000 (708.7)
W mm/min (ipm) 6 000 (236.2)
B deg/min 720
Feedrate mm/min (ipm) 1 to 10 000 (0.04 to 393.7)
Automatic tool changer (ATC) Type of tool shank MAS BT50
Type of retention knob MAS P50T-1
Tool storage capacity 38 tools
Maximum tool diameter When adjacent pots are occupied mm (in) 125 (4.92)
When adjacent pots are empty mm (in) 240 (9.44)
Maximum tool length mm (in) 400 (15.74)
Maximum tool mass kg (lbs) 25 (55)
Tool selection Pot address random short-cut
Spindle drive motor (30 min./cont. rating) kW (HP) AC30/22 (40/30)
Power source Electric power supply AC200/220V +/-10%, 50/60Hz +-2%
Power Capacity kVA 80
Compressed air supply Pressure MPa 0.5 to 0.8 (72.5 to 116)
Flowrate NI/min 900
Machine size Machine height mm (in) 4 590 (181)
Floor space mm (in) 5 990 x 5 990 (236 x 236)
Mass of machine (including NC equipment) kg (lbs) 30 000 (66 000)
Accuracy Positioning accuracy X, Y, Z mm/min (ipm) +/-0.008/full length (+/-0.00032/full length)
W mm/min (ipm) +/-0.010/full length (+/-0.00040/full length)
Repeatability X, Y, Z mm/min (ipm) +/-0.004 (+/-0.00016)
W mm/min (ipm) +/-0.006 (+/-0.00024)
Table indexing accuracy (arbitrary angle) sec +/-3
Table indexing repeatability (arbitrary angle) sec +/-1.5

세부내역

2006 TOSHIBA BTH 110R18 "HI CUBE" CNC HORIZONTAL BORING MILL WITH 4,000 RPM SPINDLE AND 38 ATC MAGAZINE. EXCELLENT CONDITION! UNDER POWER IN OUR WAREHOUSE AND READY TO SHIP