TOSHIBA MACHINE BTH 130 R24 CNC수평 테이블 타입 보링

ID#:288454
상표:TOSHIBA MACHINE
모델:BTH 130 R24 CNC
형태:수평 테이블 타입 보링
년도:2008
제어:CNC
판매자:판매자가 누군지보기 ...
위치:Michigan
미국
가격:

투기

Lower:48
스핀들 크기:129.5 mm
테이블의 X-수평 TVL:2,997 mm
머리의 Y-수직 TVL:2,311 mm
동력:29.8 kW
Upper:68
분당 회전속도:2500 rpm
테이블 W:1,999 mm
테이블-L:2,413 mm
Z-스핀들 이동:1,524 mm

TOSHIBA BTH 130 R24 HORIZONTAL BORING MILL (2008)


BTH-130.R24
The BTH-130.R24 provides horizontal boring operation ability with machining centre productivity and flexibility.

Machine Specifications BTH-130.R24
Travel X-axis travel (Cross movement of table) mm (in) 3 000 (118)
Y-axis travel (Vertical movement of spindle head) mm (in) 2 300 (90.5)
Z-axis travel (Longitudinal movement of table) mm (in) 1 500 (60)
W-axis travel (Spindle extension) mm (in) 700 (28)
Distance from table surface to spindle center mm (in) 900 to 2 400 (35.4 to 95.4)
Distance from table center to milling spindle gauge plane mm (in) 0 to 2 300 (0 to 90.5)
Table Table working surface mm (in) 2 000 x 2 400 (78.7 x 94.4)
Table loading capacity kg (lbs) 20 000 (44 000)
Table surface configuration (Pitch to T-slots 160 mm
(6.2 in), size 22 mm (0.86 in) 13 T-slots
Minimum table indexing angle (B- axis) degrees 0.0001
Spindle Spindle diameter mm (in) 130 (5.1)
Spindle speed range min-1 5 ~ 2 500 [6 ~ 4 000]
Feedrate Rapid traverse rate X, Y Z mm/min (ipm) 14 000 (551.1)
W mm/min (ipm) 5 000 (196.8)
B deg/min 500
Feedrate X, Y Z mm/min (ipm) 1 to 7 000 (0.04 to 275.5)
Automatic tool changer (ATC) Type of tool shank MAS BT50 (CAT50)
Tool storage capacity 38[60,90,120] tools
Spindle drive motor (30 min./cont. rating) kW (HP) AC22/18.5 (AC30/25)
[AC30/22 (AC40/30)]
Machine size Machine height mm (in) 5 060 (199.2)
Floor space mm (in) 7 250 x 6 950 (285.4 x 273.6)
Mass of machine (including NC equipment) kg (lbs) 45 000 (99 000)
Accuracy Positioning accuracy X, Y, Z mm/min (ipm) +/-0.016 (+/-0.00063)/full length
W mm/min (ipm) +/-0.012 (+/-0.00047)/full length
Repeatability X, Y, Z mm/min (ipm) +/-0.007 (+/-0.00027)
W mm/min (ipm) +/-0.008 (+/-0.00031)
Machine colour R4-383 (ivory white) and N2.5 (dark gray)
For the NC system, servo motors and cooler, each maker's standard colour shall apply

ATC Magazine capacity—120 tools
Taper—BT50
Spindle speed—5 to 2,500 rpm

(Catalog specifications subject to revision)

세부내역

TOSHIBA BTH 130 R24 "HI CUBE" CNC HORIZONTAL BORING MILL FEATURES 78" X 95" TABLE WITH 0.0001 DEGREE INDEXING AND TOSNUC 999 CNC CONTROL

이 모델에 대해 더욱

더많은 정보를 보기 위해서는 TOSHIBA MACHINE BTH 130 R24 CNC, 리뷰포함, 브랜드 정보, 사진, 비디오 등, 여기를 클릭하세요..