TOSHIBA MACHINE TMD-16수직 포탑 선반 (VTL)

ID#:300417
상표:TOSHIBA MACHINE
모델:TMD-16
형태:수직 포탑 선반 (VTL)
년도:1995
제어:CNC (Fanuc 15TA)
판매자:판매자가 누군지보기 ...
위치:Michigan
미국
가격:

투기

Lower:40
테이블 직경:1,600 mm
스윙:1,999 mm
작업 높이-레일 하단:1,349 mm
동력:44.7 kW
Upper:60
분당 회전속도:280 rpm
치수:24' X 24'
무게:73,000 lbs
제어반:CNC (Fanuc 15TA)

NASH TOOL & MACHINE SUPPLY, INC.
22701 Nagel
Warren (Detroit suburb), Michigan 48089
586-759-1250
e-mail—nashmachinery@yahoo.com
www.nashmachinery.com

TOSHIBA TMD-16 CNC VERTICAL TURNING CENTER
SERIAL NUMBER 420089; BUILT 1995

MACHINE FEATURES AUTOMATIC TWO PALLET CHANGER (APC), FULL "C" AXIS WITH LIVE MILLING SPINDLE, 24 ATC, TWO 63" DIAMETER CHUCKS, AND FANUC 15TA CONTROL

Table diameter--63"
Maximum swing--78.8"
Maximum height top of table to bottom of ram--53"
Maximum cutting height--45.3"
Maximum cutting diameter--78.7"
Maximum load on table--11,000 lbs.
Travels--
horizontal travel of rail head; -31.7", +44.1"
vertical travel of ram; 31.7"
vertical travel of cross rail; 19.7"
Table speeds (2 ranges)--1.6 to 280 rpm
Maximum table torque--15,900 ft-lbf
Milling spindle speeds--12.5 to 1,500 rpm
Feedrates--
X-axis 472 ipm rapid/0.1 to 78.7 feed
Z-axis 315 ipm rapid/0.1 to 78.7 feed
C-axis 800 degrees per minute rapid/11.8 degrees per minute feed
Automatic tool changer capacity (ATC)--24; 8 for turning/16 for milling
Taper in ram--no. 50
Section of ram--8.66" x 8.66"
Table drive motor--60/50 HP
Milling spindle drive motor--20/14.7 HP
Power requirement--200/220 volts; 100 kVA
Equipped with;
automatic two pallet changer (APC)
24 tool capacity automatic tool changer (ATC)
turning and milling tool holders
chuck top jaws
(2) 63" diameter chucks
coolant tank and pump
chip conveyor
ATC tool hoist
tool measurement presetter
Fanuc 15 TA CNC control

Condition--good; inspect under power
Weight--72,200 pounds
Floor space--313" x 288" x 220" high (rail and ram in uppermost position)

세부내역

1995 TOSHIBA HIGH QUALITY CNC VERTICAL TURNING CENTER WITH 63" CHUCKS, TWO PALLET AUTO CHANGER, LIVE MILLING SPINDLE, FULL 'C' AXIS, AND 24 ATC. UNDER POWER IN OUR WAREHOUSE

이 모델에 대해 더욱

더많은 정보를 보기 위해서는 TOSHIBA MACHINE TMD-16, 리뷰포함, 브랜드 정보, 사진, 비디오 등, 여기를 클릭하세요..