BLANCHARD 18A-2로타리 표면 그라인더

ID#:304285
상표:BLANCHARD
모델:18A-2
형태:로타리 표면 그라인더
년도:1979
Serial # :14841
판매자:판매자가 누군지보기 ...
위치:Michigan
미국
환불 정책:있는 그대로
Stock # :128874
가격:

투기

BLANCHARD 18A-2 VERTICAL ROTARY SURFACE GRINDER
Serial Number: 14841
Year: 1979

Catalog Specifications:
Range: 7" Diameter x 4 3/8" High On Magnetic Chuck
8" Diameter x Up To 12" High On Plain Table

Work Table: Blanchard One-Piece Steel Magnetic Chuck, Single
pass type, 40" Outside Diameter, 26" Inside Diameter.
Chuck Uses Direct Current Only, 115 Or 230 Volts D.C.
(870 Watts). A Plain Cast Iron Table May Be Substituted
For Magnetic Chuck, 43" Outside Diameter, 26" Inside
Diameter.

Wheel: 18" Diameter x 5" Deep x 10" Hole (18" x 5" x 10") Or 18"
Diameter x 5" Deep x 12" Hole (18" x 5" x 12"), Usable
Depth 4".

Speeds: Wheel: 1200 RPM On 60 Cycle Current, 1000 RPM On
50 Cycle.

Chuck: Fixed Speed, Easily Changed With Pick-Off Gears
From .42 to .88 RPM. Higher & Lower Ranges Are Available
Where Required. Also Available Is A Continuously Variable
Drive.

Feed: Each Wheel Head Has Vertical Down Feed By Hand Or
Power, With Power Down Feed Controlled By A Separate
Wheel Control Caliper For Each Grinding Head. Each
Wheel Head Has Motor-Driven Raising And Lowering
With Push Button Control.

Standard Equipment: Two 30 HP Foot Type Spindle Motors Mounted On
Wheel Heads; One 2 HP Motor Mounted On Base For Table
Rotation; Two 3/4HP Traverse Motors; Two 1/4 HP Feed
Motors. 40" Single Pass Magnetic Chuck Or 43" Plain Table.
Waterguards, Piping Coolant Discharge Chute. Two Wheel
Control Calipers, Two Ammeters Wired In Wheel Motor
Circuits. Control Panel Containing Line Start Contactors
With Thermal Overload Protection For All Motors, With 115
Volt Control Circuit. (All Electrical Equipment To N.M.T.B.A.
Standards.)

Special Equipment: Extended Columns & Waterguards To Give Up To 18"
Vertical Range Over Plain Table; 40 Or 50 HP Spindle Motors;
18" Cylinder Wheel Holder Or Rings For Sulphur Mounting 18"
Wheels; 1000 Watt Rectifier Standard Or To J.I.C. Standards
For Magnetic Chuck; Demagnetizer; Washing Attachment;
Continuously Variable Chuck Drive Unit, Etc.

Hand Loading Type: Loading Shelf, Chuck Rings, Adjustable Unloaded & Chuck
Cleaning Devise. (Chuck Rings, Unloaded & Cleaner For Magnetic
Chuck Grinders.)

Dial Loading Type: Dial & Driving Mechanism, Adjustable Work Guides, Chuck
Rings, Adjustable Unloaded & Chuck Cleaning Device.

(#128874)

세부내역

BLANCHARD 18A-2 VERTICAL ROTARY SURFACE GRINDER

이 모델에 대해 더욱

더많은 정보를 보기 위해서는 BLANCHARD 18A-2, 리뷰포함, 브랜드 정보, 사진, 비디오 등, 여기를 클릭하세요..